BLACK+DECKER 7750 4-1/2 дюймдук кичинекей бурчтуу майдалагычтын колдонуу боюнча колдонмосу

Маанилүү коопсуздук нускамалары

Always observe basic safety precautions when using power tools to reduce the risk of fire, electric shock, and personal injury. Read and understand all instructions before operating this tool.

• Always wear eye protection, such as safety goggles, and hearing protection.
• Иш аянтынын таза жана жарык болушун камсыз кылыңыз. Башаламан же караңгы жерлер кырсыкка чакырат.
• Электр шайманын иштетип жатканда балдарды жана жанында тургандарды алыс кармаңыз. Алаксытуулар сизди башкара албай калышы мүмкүн.
• Кандайдыр бир тууралоолорду жасоодон, аксессуарларды алмаштыруудан же аспапты сактоодон мурда сайгычты кубат булагынан ажыратыңыз.
• Use the correct accessory for the application. Do not force the tool.
• Иштеп жаткан учурда аспапты эки колуңуз менен бекем кармап туруңуз.
• Ар бир колдонуудан мурун аспапты жана аксессуарларды бузуп же жок экенин текшериңиз. Бузулган болсо колдонбоңуз.

Продукт бүттүview

The BLACK+DECKER 7750 is a 4-1/2-inch small angle grinder designed for various home projects including sharpening, grinding, and cutting. It features a powerful 5.5 Amp motor and operates at 10,000 RPM.

An image of the BLACK+DECKER 7750 4-1/2-Inch Small Angle Grinder, showcasing its orange and black body, side handle, and a grinding wheel attached.

Компоненттер камтылган

• 4-1/2" Small Angle Grinder (Model 7750)
• Metal Grinding Wheel
• Ачкыч ачкычы

Жайгашуу

Каптал тутканы бекитүү

The grinder is equipped with a 2-position side handle for enhanced comfort and control. Screw the side handle firmly into either of the two threaded holes on the gear housing, depending on your preferred working position.

Installing/Changing the Grinding Wheel

1. Жаргылчак кубат булагынан ажыратылганын текшериңиз.
2. Тиштүү дөңгөлөктүн корпусунда жайгашкан шпиндельди кулпулоо баскычын басып, кармап туруңуз.
3. Using the provided spanner wrench, loosen and remove the outer flange nut by turning it counter-clockwise.
4. Remove the old grinding wheel (if applicable).
5. Place the new 4-1/2 inch grinding wheel onto the inner flange, ensuring it sits flush.
6. Replace the outer flange nut and tighten it securely with the spanner wrench while holding the spindle lock button. Do not overtighten.

Жакын план view of the BLACK+DECKER 7750 angle grinder's head, showing the attached grinding wheel, protective guard, and the spindle lock button.

Иштөө нускамалары

Күйгүзүү/өчүрүү

To turn the grinder ON, slide the power switch forward. To turn it OFF, slide the switch backward. Some models may feature a lock-on button for continuous operation; engage this feature only when necessary and maintain a firm grip.

Grinding and Cutting

Даярдоо бөлүгүн ар дайым бекем clamped. Hold the grinder firmly with both hands. Allow the tool to reach full speed before contacting the workpiece. Apply light, even pressure and move the grinder smoothly across the surface. Avoid excessive pressure, which can reduce control and damage the wheel or tool. Always direct sparks away from yourself and others.

Техникалык тейлөө

Тазалоо

Regularly clean the ventilation slots on the tool to prevent overheating. Use a soft brush or compressed air to remove dust and debris. Do not use water or chemical cleaners.

Accessory Changes

Refer to the 'Installing/Changing the Grinding Wheel' section for instructions on safely replacing accessories.

Сактагыч

Store the grinder in a dry, secure location out of reach of children. Ensure the tool is unplugged and any accessories are properly secured or removed before storage.

Проблемаларды чечүү

Жалпы маселелер

• Курал башталбайт: Check if the power cord is securely plugged into a working outlet. Ensure the power switch is in the 'ON' position.
• Ашыкча термелүү: Unplug the tool and inspect the grinding wheel for damage or improper installation. Replace damaged wheels immediately. Ensure the flange nut is tightened correctly.
• Төмөндөтүлгөн аткаруу: Verify that the correct type and size of grinding wheel are being used for the material and task. Ensure the wheel is not worn out.

If problems persist after attempting these solutions, discontinue use and contact BLACK+DECKER customer service for assistance.

Техникалык шарттар

Кепилдик жана колдоо

Кепилдик маалымат

This BLACK+DECKER 7750 Small Angle Grinder is covered by a 2-year limited warranty from the date of purchase. This warranty covers defects in material or workmanship. Please retain your proof of purchase for warranty claims.

Кардарларды колдоо

For technical assistance, replacement parts, or to make a warranty claim, please contact BLACK+DECKER customer service. Refer to the official BLACK+DECKER webучурдагы байланыш маалыматы үчүн сайт же продуктунун таңгагы.