Ultrak S149 Stopwatch/Printer Instruction Manual

Introduction

This manual provides detailed instructions for the proper use and maintenance of your Ultrak S149 Stopwatch/Printer. Please read this manual thoroughly before operating the device to ensure optimal performance and longevity.

1-сүрөт: The Ultrak S149 Stopwatch/Printer. This image displays the device's front panel, featuring a digital display, control buttons for lap/split, start/stop, clear, and recall functions, and the integrated thermal printer mechanism at the top. The brand "SEIKO" is visible on the device, indicating its origin or technology.

Пакеттин мазмуну

Пакетиңизде бардык буюмдар бар экенин текшериңиз:

• Ultrak S149 Stopwatch/Printer Unit
• Lanyard
• Батареялар (алдын ала орнотулган же өзүнчө)
• 2 Rolls of Thermal Paper (approximately 600 lines each)

Жайгашуу

1. Батареяны орнотуу

If batteries are not pre-installed, open the battery compartment located on the back of the unit. Insert the specified batteries, ensuring correct polarity. Close the compartment securely.

2. Кагаз түрмөгүн орнотуу

1. Open the printer cover located at the top of the unit.
2. Insert a new thermal paper roll, ensuring the paper feeds correctly into the printing mechanism.
3. Принтердин капкагын жабыңыз.

3. Күйгүзүү

Locate the "POWER ON" switch, typically on the side or top right of the unit (refer to Figure 1). Slide the switch to the "ON" position. The display should illuminate.

Иштөө нускамалары

Basic Stopwatch Functions

• Баштоо/Токтоо: басыңыз БАШТОО button to begin timing. Press it again to pause or stop the timer.
• Айлампа/Бөлүнүү убактысы: Секундомер иштеп турганда, баскычын басыңыз ТАПТАМА/БӨЛҮҮНҮ КАЙРА ОРНОТУУ button to record a lap or split time. The display shows three lines: split time, lap time, and running time.
• Кайтаруу: After stopping the timer, press the ТАПТАМА/БӨЛҮҮНҮ КАЙРА ОРНОТУУ button to clear the current timing data and prepare for a new measurement.
• Эстутумду тазалоо: басыңыз CLEAR button to erase all stored memory data.

Эс тутум функциялары

The S149 can store and recall up to 300 split/lap times, segregated by event.

• Эскертүү: басыңыз ЧАКЫРУУ баскычына view stored lap and split times. Use the navigation buttons (if available, typically associated with A/S SET or TIME) to scroll through the memory.
• User ID Function: The device includes a user ID function to separate data, allowing for organized storage of multiple event results. Refer to the on-screen prompts or specific button combinations for setting and utilizing user IDs.

Басып чыгаруу функциялары

The integrated thermal printer can print 13 digits per line at a speed of 1.5 lines per second.

• Printing Times: Lap or split times can be printed as a block. The device typically prints automatically when a lap/split is recorded, or there may be a dedicated print button (often combined with other functions like A/S SET or TIME).
• Auto Start Function: The S149 features an auto start function, which can be configured to begin timing automatically under certain conditions. Consult the device's display or button combinations for activation.

Убакыт жана Календар дисплей

The device can display the current time and calendar. Use the TIME button or mode selection to switch to time display mode. Settings for time and date are typically adjusted using the A/S SET button in conjunction with other controls.

Техникалык тейлөө

Тазалоо

Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents. Avoid exposing the device to excessive moisture.

Батареяны алмаштыруу

Replace batteries when the display dims or the unit fails to power on. For the main battery, professional replacement may be recommended due to potential complexity. Printer batteries are typically user-replaceable.

Кагаз түрмөгүн алмаштыруу

When the paper roll is depleted, replace it with a new thermal paper roll as described in the Setup section. Ensure you use thermal paper compatible with the S149 printer.

Проблемаларды чечүү

• Түзмөк күйбөйт: Батареянын орнотулушун текшерип, батарейкалары түгөнүп калбагандыгын текшериңиз.
• Дисплей күңүрт же бош: Батареяларды алмаштырыңыз.
• Принтер басып чыгарбай жатат:
  • Ensure paper roll is correctly installed and not depleted.
  • Verify that thermal paper is being used (standard paper will not work).
  • In cold environments (below 0°C / 32°F), thermal printing performance may be significantly reduced or cease entirely. Operate the device within recommended temperature ranges.
• Туура эмес убакыт же дата: Adjust settings using the TIME and A/S SET buttons as per the operating instructions.
• Memory recall issues: Ensure memory has not been cleared. If issues persist, try clearing memory and re-testing.

Техникалык шарттар

Кепилдик жана колдоо

The Ultrak S149 Stopwatch/Printer comes with a 3 жылдык кепилдикКепилдик боюнча дооматтар же техникалык колдоо үчүн, сатуучуга же өндүрүүчүгө түздөн-түз кайрылыңыз. Кепилдикти жарактуулук мөөнөтү үчүн сатып алганыңызды тастыктаган документти сактап коюңуз.