1. Киришүү
This manual provides essential instructions for the installation, maintenance, and proper use of your Wahl Professional 2-Hole Standard Clipper Blade, Model 1006. Designed for professional precision, this replacement blade ensures accurate and sharp performance for various Wahl clippers. Please read this manual thoroughly before use to ensure optimal performance and longevity of your blade.
Image 1: Wahl Professional 2-Hole Standard Clipper Blade, Model 1006.
2. Шайкештик
The Wahl Professional 2-Hole Standard Clipper Blade (Model 1006) is compatible with the following Wahl clipper models:
- Wahl Super Taper
- Wahl Super Taper II
- Wahl Icon
- Wahl Pro Basic
- Wahl Sterling 9
Image 2: Various Wahl clipper models compatible with the 2-Hole Standard Clipper Blade.
3. Пакеттин мазмуну
Your Wahl Professional 2-Hole Standard Clipper Blade package includes:
- 1mm-3mm Standard Clipper Blade
- Blade майы
- Монтаждоо бурамалар
- Орнотуу боюнча нускамалар (бул колдонмо)
4. Бычак орнотуу
Follow these steps to properly install your new clipper blade:
- Өчүрүү: Ensure your clipper is turned off and unplugged from the power source before beginning installation.
- Эски бычакты алып салуу: Using a screwdriver, carefully loosen and remove the two screws holding the old blade assembly to the clipper housing. Set aside the old blade and screws.
- Clean Clipper: Clean any hair or debris from the clipper's blade area using a brush.
- Position New Blade: Place the new Wahl Professional 2-Hole Standard Clipper Blade onto the clipper, aligning the holes in the blade with the screw holes on the clipper. Ensure the small moving blade is correctly seated on the drive lever.
- Secure Blade: Insert the screws and tighten them just enough to hold the blade in place, allowing for slight adjustment.
- Align Blades: Adjust the blade to ensure the top blade (cutter) is perfectly aligned with the bottom blade (comb), with the teeth of the top blade slightly behind the teeth of the bottom blade. This prevents cutting the skin.
- Акыркы бекемдөө: Once aligned, firmly tighten both screws. Do not overtighten.
- Майлоо: Apply a few drops of Wahl clipper oil to the teeth of the new blade.
Сүрөт 3: Детальдуу view of the 2-Hole Standard Clipper Blade, highlighting its design and dimensions.
5. Техникалык тейлөө
Proper maintenance is crucial for extending the life and performance of your clipper blade.
5.1 Чачтарды майлоо
Regular oiling reduces friction, prevents rusting, and ensures smooth cutting performance. Wahl's high-carbon blades benefit significantly from consistent lubrication.
- Май колдонуу: With the clipper turned off, apply a drop of Wahl clipper oil to each corner of the top blade and one drop to the foot of the blade.
- Distribute Oil: Turn the clipper on for a few seconds to allow the oil to work its way into the blades.
- Ашыкчасын аарчыңыз: Ашыкча майды таза чүпүрөк менен сүртүңүз.
It is recommended to oil your blades before or after each use, especially if the clipper feels sluggish or pulls hair.
Video 1: Demonstrates how to oil clipper blades to prevent pulling and ensure smooth operation.
5.2 Бычактарды тазалоо
After each use, brush off any loose hair from the blades. For a deeper clean, especially after prolonged use or if hair buildup is noticeable:
- Чачты тазалоо: Use a small cleaning brush to remove hair from between the blade teeth.
- Дезинфекциялоо (милдеттүү эмес): For professional use, consider using a clipper disinfectant spray (e.g., Wahl Clini-Clip Spray) to sanitize the blades. Follow the product's instructions.
- Кайра майлоо: Always re-oil the blades after cleaning or disinfecting to prevent rust and maintain lubrication.
Image 4: Essential maintenance products for Wahl clippers, including blade oil and disinfectant spray.
6. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Чач алуучу машина чачты жулуп же илип алат | Blades are dull, dirty, or not properly oiled. | Clean and oil the blades. If the problem persists, the blades may need sharpening or replacement. |
| Blades are rusting | Insufficient oiling or exposure to moisture. | Ensure blades are thoroughly dried after cleaning and regularly oiled, especially in humid environments. |
| Бычак эффективдүү кесилбейт | Improper blade alignment or worn blades. | Check blade alignment as per installation instructions. If blades are old, consider replacing them. |
7. Техникалык шарттар
- Продукт аты: 2-Hole Standard Clipper Blade
- Модель номери: 1006
- Бренд: Профессионалдуу тандоо
- Кесүү узундугу: 1mm-3mm (Standard)
- Материал: Жогорку көмүртектүү болот
- Өлчөмдөрү: 2 x 0.1 x 3 дюйм
- Элемент Салмагы: 0.8 унция
- UPC: 785085010068, 043917100609
- Өндүрүүчү: Профессионалдуу тандоо
- Келип чыгышы: АКШда жасалган
8. Кепилдик жана колдоо
For warranty information, product support, or to purchase additional accessories, please visit the official Wahl Professional webсайтка же кардарларды тейлөөгө кайрылыңыз. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.
Профессионалдуу тандоо Webсайт: www.wahlpro.com