BANDAI Gamera 2006 Heisei Gamera 6-inch Vinyl Figure Instruction Manual

1. Продукт бүтүп калдыview

This document provides instructions for the BANDAI Movie Monster Series: GAMERA 2 (HEISEI SERIES) vinyl figure. This figure accurately reproduces Gamera as it appears in "Gamera 3", the third film in the second series of Gamera movies, known as the Heisei era films.

Key features of this figure include:

• A highly-detailed and colorful action figure with several points of articulation.
• An accurate reproduction of the Kaiju monster from the Gamera series movie.
• Manufactured by Bandai.

Image of the Bandai Japanese 6-inch Vinyl Figure of Heisei Gamera, showcasing its detailed sculpt and dark green color.

2. Орнотуу

Upon receiving your Gamera figure, please follow these steps:

1. Кутудан чыгаруу: Carefully remove the figure from its packaging. Avoid using sharp objects that could scratch or damage the figure.
2. Алгачкы текшерүү: Examine the figure for any visible manufacturing defects or damage that may have occurred during shipping.

3. Operating the Figure

This Gamera figure features several points of articulation, allowing for various poses. Handle the figure gently to prevent damage.

• Артикуляциялык чекиттер: The figure's legs move at the hips, the tail can move slightly side-to-side, and the arms move at the shoulders.
• Поза: Gently manipulate the limbs to achieve desired poses. Do not force joints beyond their natural range of motion.

4. Техникалык тейлөө

Proper care will help maintain the condition and longevity of your Gamera figure.

• Тазалоо: Dust the figure regularly with a soft, dry cloth. For more stubborn dirt, lightly dampen a cloth with water and gently wipe the surface. Avoid harsh chemicals or abrasive cleaners.
• Сактагыч: Store the figure in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. Prolonged exposure to sunlight can cause fading or material degradation.

5. Кыйынчылыктарды

Эгерде сиз фигураңыз менен кандайдыр бир көйгөйлөргө туш болсоңуз, төмөнкүлөрдү карап көрүңүз:

• Stiff or Loose Joints: If a joint feels stiff, gently warm the area with a hairdryer on a low setting for a few seconds to make the vinyl more pliable, then carefully move the joint. If a joint is loose, it may be possible to carefully adjust it, but avoid excessive force.
• Figure Details: Some figures may have minor variations in design, such as the number of fingers, which are part of the specific sculpt and not a defect.

6. Техникалык шарттар