Introduction
This manual provides essential instructions for the safe operation, maintenance, and storage of your Performance Tool W1611 2.25 Ton (4,500 lbs) Capacity Trolley Jack. Before using the jack, it is crucial to read and understand all instructions and safety warnings to prevent injury or property damage. Keep this manual for future reference.
Image: The Performance Tool W1611 2.25 Ton Trolley Jack, a yellow hydraulic jack with a long handle.
Маанилүү коопсуздук маалыматы
WARNING: Failure to heed these warnings may result in personal injury or property damage.
- Бардык нускамаларды окуңуз: Understand the operation and limitations of the jack, as well as the hazards involved.
- Тегиз, катуу бетте колдонуу: Always use the jack on a hard, level surface capable of supporting the load. Avoid soft ground or uneven surfaces.
- Номиналдык кубаттуулуктан ашпаңыз: The W1611 jack has a maximum capacity of 2.25 tons (4,500 lbs). Do not attempt to lift loads heavier than this rating.
- Джек стенддерин колдонуңуз: This jack is a lifting device only. Immediately after lifting, support the vehicle with appropriate jack stands. Never work under a vehicle supported only by a jack.
- Жүктү борборлоштуруу: Ensure the load is centered on the jack saddle. Off-center loads can cause instability.
- Таза кармоо: Keep hands, feet, and other body parts clear of moving parts and the area under the load.
- Ар бир колдонуудан мурун текшерүү: Check the jack for any damage, leaks, or loose parts before each use. Do not use if damaged.
- Акырындык менен төмөндөтүңүз: Always lower the load slowly and in a controlled manner.
- Сунуш 65 Эскертүү: Бул продукт Калифорния штатында рак жана тубаса кемтик же башка репродуктивдүү зыян келтирүүчү химиялык заттарды камтышы мүмкүн. Колдон кийин колду жуу.
Пакеттин мазмуну
Таңгактан чыгарууда бардык компоненттер бар экенин текшериңиз:
- 1 Performance Tool W1611 2.25 Ton Trolley Jack
- 1 Operating Handle
- 1 Blow-molded plastic storage case
Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Модел | W1611 |
| Жүктөө жөндөмдүүлүгү | 2.25 тонна (4,500 фунт) |
| Минималдуу көтөрүү бийиктиги | 5-1/4 дюйм |
| Максималдуу көтөрүү бийиктиги | 15 дюйм |
| Продукциянын өлчөмдөрү (L x W x Y) | 23.2 x 10.3 x 6.8 дюйм |
| Элемент Салмагы | Approximately 27 lbs (including case) |
| Ээр | Steel lifting saddle with 360-degree swivel |
| Wheels | Heavy-duty steel front wheels, ball-bearing swivel rear wheels |
Сүрөт: Жакын план view highlighting the steel lifting saddle and the heavy-duty wheels of the trolley jack.
Орнотуу жана баштапкы даярдоо
1. таңгактан чыгаруу
Carefully remove the trolley jack and its components from the packaging. Inspect for any shipping damage. If any damage is found, do not use the jack and contact customer support.
2. Туткасы Ассамблея
Insert the operating handle into the handle socket on the jack. Ensure it is securely seated. Some models may require tightening a set screw.
3. Bleeding the Hydraulic System
Before first use, or if the jack has been stored for an extended period, it is recommended to bleed any air from the hydraulic system to ensure proper operation. This procedure helps distribute fluid evenly through internal components.
- Locate the release valve (typically a screw or knob near the handle socket).
- Turn the release valve counter-clockwise to open it fully.
- Pump the handle vigorously six (6) to ten (10) times. This action will cycle the hydraulic fluid and expel any trapped air.
- Turn the release valve clockwise to close it firmly. The jack is now ready for use.
Иштөө нускамалары
1. Унааны көтөрүү
- Унааны даярдоо: Park the vehicle on a hard, level surface. Engage the parking brake and place the transmission in 'Park' (automatic) or 'Reverse' (manual). Block the wheels that will remain on the ground to prevent movement.
- Джекти жайгаштырыңыз: Locate the manufacturer-recommended lifting points on your vehicle's frame or chassis. Position the jack so the saddle is directly under the lifting point. Ensure the jack is stable and the load is centered on the saddle.
- Унааны көтөрүү: Close the release valve by turning it clockwise until it is firm. Pump the operating handle up and down to raise the vehicle to the desired height.
- Жек Стенддери менен бекемдеңиз: Once the vehicle is lifted, immediately place appropriately rated jack stands under the vehicle's designated support points. Slowly lower the vehicle onto the jack stands by gradually turning the release valve counter-clockwise. Ensure the vehicle is stable on the jack stands before performing any work.
2. Унааны түшүрүү
- Аймакты тазалоо: Ensure all tools, personnel, and obstructions are clear from under and around the vehicle.
- Бир аз көтөрүү: Эгерде унаа домкратта турса, аны домкраттан бир аз көтөрүү үчүн домкраттын туткасын бир нече жолу басыңыз.
- Джек стенддерин алып салыңыз: Домкрат таянычтарын унаанын астынан этияттык менен алып салыңыз.
- Унааны түшүрүңүз: Slowly turn the release valve counter-clockwise to gradually lower the vehicle to the ground. Once fully lowered, remove the jack.
Image: The Performance Tool W1611 trolley jack positioned for lifting, demonstrating its extended handle and low profile.
Техникалык тейлөө
Regular maintenance ensures the longevity and safe operation of your trolley jack.
- Тазалоо: Keep the jack clean and free of dirt, grease, and debris. Wipe down the exterior with a clean cloth after each use.
- Майлоо: Periodically lubricate the pivot points, wheels, and especially the wheel castor bearings with light machine oil to ensure smooth operation and prevent rust.
- Гидравликалык суюктук: Check the hydraulic fluid level periodically. If the fluid level is low, consult a qualified service technician for proper refilling with hydraulic jack oil. Do not use brake fluid or other non-specified fluids.
- Текшерүү: Regularly inspect the jack for any signs of wear, damage, or leaks. Pay close attention to welds, the hydraulic cylinder, and the handle. If any issues are found, discontinue use and have it repaired by a qualified professional.
Проблемаларды чечүү
Жалпы көйгөйлөр жана аларды чечүү жолдору үчүн төмөнкү таблицага кайрылыңыз.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Jack will not lift or lifts slowly | Гидравликалык системадагы аба Гидравликалык суюктуктун деңгээли төмөн Клапан толугу менен жабылган эмес | Bleed the hydraulic system (refer to Setup section) Consult a qualified technician to check/refill fluid Ensure release valve is firmly closed clockwise |
| Jack lowers under load | Клапан толугу менен жабылган эмес Internal hydraulic leak Ашыкча жүктөө | Ensure release valve is firmly closed Discontinue use and consult a qualified technician Ensure load does not exceed 2.25 tons (4,500 lbs) |
| Jack is difficult to pump | Гидравликалык системадагы аба Кыймылдуу бөлүктөрдө майлоонун жоктугу Damaged pump mechanism | Гидравликалык системаны кандырат Lubricate pivot points and wheels Квалификациялуу техниктен кеңеш алыңыз |
Сактагыч
Proper storage helps maintain the jack's condition and readiness for use.
- Сактоодон мурун тазалоо: Ensure the jack is clean and dry before storing.
- Lower Ram Fully: Always lower the jack's ram completely before storage to relieve pressure on the hydraulic system.
- Сактагычты колдонуу: Store the jack in its provided blow-molded plastic case to protect it from dust, moisture, and damage. This also prevents it from rolling around if stored in a vehicle.
- Кургак жерде сактоо керек: Store the jack in a dry, protected area, away from corrosive materials and extreme temperatures.
Image: The Performance Tool W1611 trolley jack alongside its durable black plastic storage case, emphasizing portability and protection.
Кепилдик жана колдоо
For warranty information or technical support regarding your Performance Tool W1611 2.25 Ton Trolley Jack, please refer to the documentation included with your purchase or visit the official Performance Tool webсайт. Кардарларды тейлөө кызматынын байланыш маалыматтары, адатта, өндүрүүчүнүн сайтында жеткиликтүү. webсайт же продукт таңгак.
кире аласыз Performance Tool Store on Amazon көбүрөөк продукт маалымат жана колдоо ресурстар үчүн.