Clore Automotive JNC660

Clore Automotive Jump-N-Carry JNC660 User Manual

Model: JNC660 | Brand: Clore Automotive

1. Киришүү

The Clore Automotive Jump-N-Carry JNC660 is a powerful and portable 12-volt jump starter designed to provide reliable starting power for a wide range of vehicles. Featuring 1700 peak amps and a 22Ah Clore PROFORMER battery, this unit is built for demanding conditions, including extremely cold weather and multiple jump starts. Its robust design and heavy-duty cables ensure dependable performance when you need it most.

Clore Automotive Jump-N-Carry JNC660 Jump Starter, front view

Сүрөт 1: Алдыңкы view of the Clore Automotive Jump-N-Carry JNC660 Jump Starter, showing the voltmeter, charging status lights, and cable storage.

2. Коопсуздук маалыматы

Always prioritize safety when operating the JNC660 jump starter. Failure to follow these guidelines can result in serious injury or damage to the unit or vehicle.

  • Wear appropriate personal protective equipment, including safety glasses and gloves, when working with batteries.
  • Ensure adequate ventilation in the work area to prevent the accumulation of explosive gases.
  • Do not smoke or allow sparks or flames near the battery or jump starter.
  • Keep the jump starter away from water, oil, and other liquids.
  • Тоңуп калган батареяны эч качан секирип баштоого аракет кылбаңыз.
  • Ensure vehicle ignition is off and all accessories are turned off before connecting the jump starter.
  • Оң (кызыл) клди туташтырыңызamp to the positive (+) battery terminal first, then the negative (black) clamp to a clean, unpainted metal part of the vehicle's chassis or engine block, away from the battery.
  • Disconnect the negative (black) clamp биринчи, андан кийин оң (кызыл) clamp after the vehicle has started.
  • Шамды кыска туташтырбаңызamps.

3. Кутуда эмне бар

Upon unpacking your Clore Automotive Jump-N-Carry JNC660, verify that all components are present:

  • JNC660 12V Jump Starter Unit
  • 12V Male-to-Male Charging Cable

Note: An AC extension cord (not included) is required for charging the unit via a standard wall outlet.

4. Орнотуу жана баштапкы заряддоо

Before first use, the JNC660 must be fully charged. This ensures optimal performance and extends battery life.

  1. Locate the 2-prong male input on the JNC660 unit.
  2. Connect a standard household extension cord (not included) to this input.
  3. Узарткычтын экинчи учун стандарттуу 120V AC розеткасына сайыңыз.
  4. The "CHARGED" light on the unit will illuminate when charging is complete. The unit can be left plugged in for continuous maintenance charging.
  5. Alternatively, use the provided 12V Male-to-Male Charging Cable to charge the unit from a vehicle's 12V accessory outlet. Do not leave the unit charging via the 12V accessory outlet once it is full (approximately 5 hours from empty).
Clore Automotive Jump-N-Carry JNC660 Jump Starter on a car engine bay

Figure 2: The JNC660 unit positioned in a vehicle's engine bay, ready for use or charging.

5. Иштөө нускамалары

Follow these steps to jump start a vehicle using your JNC660:

  1. Ensure the JNC660 is fully charged. Check the DC Volts gauge for battery status.
  2. Turn off the ignition of the vehicle to be jump started and ensure all accessories (lights, radio, etc.) are off.
  3. туташтыруу оң (кызыл) clamp -га оң (+) терминал of the vehicle's discharged battery. Ensure a secure connection.
  4. туташтыруу negative (black) clamp to a clean, unpainted metal part of the vehicle's chassis or engine block, away from the battery and any moving parts. This provides a safe ground connection.
  5. Attempt to start the vehicle. If the vehicle does not start immediately, wait a few minutes before trying again to allow the jump starter to transfer more charge.
  6. Унаа от алгандан кийин, аны ажыратыңыз negative (black) clamp from the vehicle's chassis/engine block first.
  7. Андан кийин, ажыратыңыз оң (кызыл) clamp from the vehicle's battery terminal.
  8. Immediately recharge the JNC660 after each use to maintain its readiness.

Alternative Connection (Use with Caution): In some cases, if the standard grounding method does not work, you may connect the negative (black) clamp directly to the negative (-) terminal of the vehicle's battery. This method carries a slightly higher risk of sparking and should only be used if the primary method is unsuccessful.

Clore Automotive Jump-N-Carry JNC660 Jump Starter connected to a car battery

Figure 3: The JNC660 connected to a vehicle's battery terminals, demonstrating proper clamp жайгаштыруу.

6. Техникалык тейлөө

Proper maintenance ensures the longevity and reliability of your JNC660 jump starter.

  • Үзгүлтүксүз заряддоо: The JNC660 should be recharged after every use. For optimal battery health, it is recommended to keep the unit plugged into an AC outlet when not in use, as the built-in automatic charger will maintain a full charge without overcharging.
  • Сактагыч: Агрегатты салкын, кургак жерде, тике күн нурунан жана экстремалдык температурадан алыс сактаңыз.
  • Тазалоо: Keep the unit and its clamps clean and free of dirt, grease, and corrosion. Use a dry cloth for cleaning.
  • Кабелдик текшерүү: Кабелдерди жана кабелдерди мезгил-мезгили менен текшерип туруңузampБузулуунун, эскирүүнүн же дат басуунун кандайдыр бир белгилерин байкасаңыз, алмаштырыңыз. Зарыл болсо, алмаштырыңыз.

7. Кыйынчылыктарды

If you encounter issues with your JNC660, consider the following common troubleshooting steps:

КөйгөйМүмкүн себепЧечим
Түзмөк күйбөйт же заряддалбайт.Unit is completely discharged; charging cable not connected properly; faulty outlet.Ensure charging cable is securely connected to both the unit and a working AC outlet. Allow several hours for initial charge. If using 12V charging, ensure vehicle's accessory outlet is active.
Унаа туташтырылгандан кийин башталбайт.Туура эмес clamp connection; vehicle battery severely discharged; vehicle issue unrelated to battery.Текшерүү clamps are securely attached to the correct terminals/ground point. Ensure the JNC660 is fully charged. If the vehicle still doesn't start, consult a professional mechanic as the issue may not be battery-related.
Unit loses charge quickly.Infrequent recharging; internal battery degradation.Ensure the unit is recharged immediately after each use and kept on continuous charge when not in use. If the issue persists, the internal battery may need replacement.

8. Техникалык шарттар

  • Модел: Jnc660
  • Чоку Amps: 1700 Amps
  • Cranking Amps: 425 Amps
  • Батарея түрү: 22Ah Clore PROFORMER Battery
  • Кабелдин узундугу: 46 дюйм
  • Кабель өлчөгүч: #2 AWG Heavy-Duty
  • Чыгуу: 12 Вольт DC
  • Өлчөмдөрү (DxWxH): 5.1"D x 14.1"W x 16.3"H
  • Салмагы: 18 фунт
  • Өндүрүүчү: Clore Automotive
  • UPC: 010271025350
  • Келип чыккан өлкө: Вьетнам
Clore Automotive Jump-N-Carry JNC660 Jump Starter with dimensions labeled

Figure 4: Dimensions of the JNC660 unit, showing its compact and portable design.

9. Кепилдик жана колдоо

Clore Automotive stands behind the quality of its products. For warranty claims, technical support, or service inquiries regarding your JNC660 jump starter, please contact Clore Automotive directly. While specific warranty terms may vary, the manufacturer typically offers support for repairs. Some users have reported receiving coupons for repair and shipping costs, indicating a commitment to customer satisfaction.

For the most current warranty information and support options, please visit the official Clore Automotive webсайтка же сатып алууда камтылган документтерди караңыз.

Clore Automotive Contact Information:

© 2025 Clore Automotive. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.