BLACK+DECKER 16270 бурама экстрактор топтому - колдонуу боюнча колдонмо

Introduction

This instruction manual provides essential information for the safe and effective use of your BLACK+DECKER 16270 5-Piece Screw Extractor Set. Please read this manual thoroughly before operation and retain it for future reference.

Image: The BLACK+DECKER 16270 Screw Extractor Set, showing the five extractors in their clear plastic packaging with the BLACK+DECKER branding.

Продукт бүттүview

The BLACK+DECKER 16270 Screw Extractor Set is designed for the removal of broken or stripped screws and bolts. This 5-piece set includes the most commonly used sizes for various applications.

Мазмуну:

• (1) Screw Extractor 5/64-inch
• (1) Screw Extractor 7/64-inch
• (1) Screw Extractor 5/32-inch
• (1) Screw Extractor 1/4-inch
• (1) Screw Extractor 9/32-inch

Негизги өзгөчөлүктөрү:

• Constructed from durable alloy steel for longevity.
• Designed for effective removal of damaged fasteners.
• Compact storage case for easy organization and transport.

Коопсуздук маалыматы

Always wear appropriate personal protective equipment (PPE), including safety glasses, when using screw extractors. Ensure the workpiece is securely clamped. Use caution to avoid injury from sharp edges or rotating tools.

ЭСКЕРТҮҮ: Бул продукт сизге химиялык заттардын, анын ичинде коргошундун таасирин тийгизиши мүмкүн, ал Калифорния штатына рак жана тубаса кемтик же башка репродуктивдүү зыян алып келиши белгилүү. Көбүрөөк маалымат алуу үчүн өтүңүз www.P65Warnings.ca.gov.

Иштөө нускамалары

Follow these steps for effective screw extraction:

1. Prepare the Fastener: If the screw head is broken off, ensure the surface is flat. If the head is stripped, attempt to clean out any debris.
2. Пилоттук тешик бургулаңыз: Select a drill bit slightly smaller than the screw extractor you intend to use. Drill a pilot hole into the center of the damaged screw. The depth of the hole should be sufficient to allow the extractor to grip. For best results, use a drill press to ensure the hole is straight and centered.
3. Экстракторду киргизүү: Choose the appropriate size screw extractor from the set. The extractor should fit snugly into the pilot hole.
4. Экстракторду иштетиңиз: Insert the extractor into the pilot hole. Using a tap wrench or a suitable wrench, turn the extractor counter-clockwise. The reverse threads on the extractor will bite into the screw material.
5. Extract the Screw: Continue to turn the extractor slowly and steadily counter-clockwise. The screw should begin to loosen and back out. Apply consistent pressure.
6. Remove the Extractor: Once the screw is removed, carefully unthread the extractor from the screw.

Кеңеш: For very stubborn screws, apply a penetrating oil to the screw threads and allow it to soak for some time before attempting extraction.

Техникалык тейлөө

To ensure the longevity and performance of your screw extractor set:

• Тазалоо: After each use, wipe the extractors clean of any debris or metal shavings.
• Сактагыч: Store the extractors in their original compact storage case in a dry environment to prevent rust and damage.
• Текшерүү: Periodically inspect the extractors for signs of wear, damage, or dullness. Replace any damaged extractors to ensure optimal performance and safety.
• Майлоо: A light coat of oil can be applied to the extractors if they are to be stored for extended periods in humid conditions.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик маалымат

Бул BLACK+DECKER продуктусу төмөнкүлөр менен келет 2 жылдык кепилдикТак шарттар жана эрежелер менен таанышуу үчүн, сатып алууңузга тиркелген кепилдик картасын караңыз же расмий BLACK+DECKER дүкөнүнө баш багыңыз. website. This warranty typically covers defects in material and workmanship under normal use.

Кардарларды колдоо

For technical assistance, replacement parts, or warranty claims, please contact BLACK+DECKER customer support. Visit the official BLACK+DECKER webэң заманбап байланыш маалыматы жана колдоо булактары үчүн сайт.

Онлайн ресурстар: www.blackanddecker.com