3M панель чаптоочу желим 08115 колдонуу боюнча колдонмо

Продукт бүттүview

The 3M Panel Bonding Adhesive 08115 is an OEM recommended two-part epoxy designed for bonding automotive body panels. This 200 mL cartridge provides a strong, durable, and permanent bond for non-structural repairs, such as quarter panels, roofs, box sides, van sides, utility vehicle sides, and door skins. It is formulated to bond various materials including steel, aluminum, SMC, and FRP (traditional fiberglass).

• OEM Recommended: Trusted by OEMs for non-structural repairs.
• Strong Multi-Material Bond: Creates a durable hold on properly prepared steel, aluminum, SMC, and fiberglass (FRP) surfaces.
• Extended Work Time, Fast Cure: Offers a 90-minute working time, a 4-hour clamp time, and full cure at room temperature in 24 hours. Cure time can be accelerated with heat.
• Weld & Rivet Friendly: Can be weld-bonded or rivet-bonded during its work time.
• Easy Cartridge Application: Packaged in a 200 mL dual cartridge for use with a standard applicator gun (not included).

Image: The 3M Panel Bonding Adhesive 08115 in its 200 mL cartridge packaging.

Орнотуу жана даярдоо

Керектүү куралдар жана материалдар:

• 3M Panel Bonding Adhesive 08115 cartridge
• Standard two-part adhesive applicator gun (not included)
• Mixing nozzle (included with cartridge)
• Surface cleaning agents (e.g., 3M General Purpose Adhesive Cleaner)
• Abrasive material (e.g., sandpaper, Scotch-Brite pad)
• Clamps or fasteners
• Personal protective equipment (gloves, eye protection)

Бетти даярдоо:

1. Ensure all surfaces to be bonded are clean, dry, and free of oil, grease, wax, and other contaminants.
2. Mechanically abrade the bonding surfaces using appropriate abrasive materials to ensure proper adhesion.
3. Clean the abraded surfaces thoroughly with a suitable cleaning agent and allow to dry completely.

Картридж даярдоо:

1. Remove the cap from the 3M Panel Bonding Adhesive 08115 cartridge.
2. Attach a mixing nozzle securely to the cartridge.
3. Load the cartridge into a compatible two-part adhesive applicator gun.
4. Dispense a small amount of adhesive onto a scrap surface until both components are flowing evenly and the color is consistent, indicating proper mixing. This purges any unmixed material from the nozzle.

Image: The 3M Panel Bonding Adhesive 08115 cartridge with two mixing nozzles, ready for use with an applicator gun.

Колдонмо нускамалары

1. Apply the mixed adhesive directly to one of the prepared bonding surfaces. Ensure even coverage across the entire bonding area.
2. Align and join the panels within the 90-minute working time.
3. Secure the bonded panels with clamps or other fasteners for a minimum of 4 hours to maintain proper alignment and contact during the initial cure.
4. The adhesive features integrated glass-bead technology, which acts as a built-in spacer to ensure optimal bond line thickness and prevent over-clamping.
5. For full strength, allow the adhesive to cure at room temperature for 24 hours. The cure time can be accelerated with the application of heat.
6. The adhesive can be weld-bonded or rivet-bonded during its working time, offering flexibility in repair methods.

Image: Adhesive being applied to a car panel, demonstrating the dispensing process.

Image: Diagram explaining how glass bead technology protects against over-clamping and maintains minimum bond line thickness.

Image: Illustration indicating that the adhesive bonds door skins, roof skins, quarter panels, box sides, and bumper covers.

Техникалык тейлөө

Сактагыч:

Store the adhesive cartridge in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the cap is securely replaced after use to prevent contamination and premature curing of the remaining adhesive.

Re-use of Cartridge:

To re-use an opened cartridge, leave the mixing tip attached after initial use. Allow the adhesive within the tip to cure. When ready to use again, remove the cured mixing tip and attach a new, clean mixing tip. Purge a small amount of adhesive as described in the 'Cartridge Preparation' section before applying to your project.

Проблемаларды чечүү

• Начар адгезия: Ensure surfaces are thoroughly cleaned and abraded before application. Contaminants or insufficient surface preparation can lead to weak bonds.
• Туура эмес аралаштыруу: Always purge a small amount of adhesive through the mixing nozzle until a consistent color is achieved before applying to the repair area. This ensures both parts of the epoxy are properly mixed.
• Adhesive Curing Too Slowly: Verify ambient temperature is within recommended ranges. Curing can be accelerated by applying gentle heat (e.g., with a heat gun) if faster cure times are desired.
• Over-clamping: The integrated glass beads help prevent over-clamping. Ensure you are using appropriate clamping pressure to allow the glass beads to maintain the optimal bond line thickness.

Продукт спецификациялары

• Продукциянын өлчөмдөрү: 6.5 x 4.3 x 1.5 дюйм
• Элемент Салмагы: 10.6 унция
• Модель номери: 08115
• Өндүрүүчү: 3M
• Чаптама түрү: Two-part epoxy
• Иш убактысы: 90 мүнөт
• Clamp Убакыт: 4 саат
• Full Cure (Room Temp): 24 саат

Коопсуздук маалыматы

3M өнөр жай жана кесиптик продукциялары жумуш ордунда колдонуу үчүн окутулган өнөр жай жана кесиптик кардарларга сатуу үчүн арналган, этикеткаланган жана таңгакталган. Эгерде тиешелүү продукциянын таңгагында же адабиятында башкача көрсөтүлбөсө, бул продукциялар керектөөчүлөргө сатуу же колдонуу үчүн арналган эмес (мисалы, үй, жеке, башталгыч же орто мектеп, эс алуу/спорттук же тиешелүү продукциянын таңгагында же адабиятында сүрөттөлгөн эмес башка колдонуулар үчүн) жана тиешелүү ден соолук жана коопсуздук эрежелерине жана стандарттарына (мисалы, АКШ OSHA, ANSI), ошондой эле бардык продукциянын адабияттарына, колдонуучу көрсөтмөлөрүнө, эскертүүлөрүнө жана башка чектөөлөргө ылайык тандалып алынышы жана колдонулушу керек, ошондой эле колдонуучу ар кандай чакыртып алуу, талаа иш-аракеттери же продукцияны колдонуу боюнча башка эскертүү боюнча талап кылынган ар кандай чараларды көрүшү керек. 3M өнөр жай жана кесиптик продукцияларын туура эмес колдонуу жаракат алууга, ооруга, өлүмгө же мүлккө зыян келтирүүгө алып келиши мүмкүн. Продукцияны тандоо жана колдонуу боюнча жардам алуу үчүн, жергиликтүү коопсуздук боюнча адиске, өнөр жай гигиенистине же башка тема боюнча адиске кайрылыңыз. Кошумча продукция жөнүндө маалымат алуу үчүн, төмөнкү дарекке кириңиз: www.3M.com.

Кепилдик жана колдоо

For specific warranty information regarding the 3M Panel Bonding Adhesive 08115, please refer to the product packaging or contact 3M directly. For technical support, product inquiries, or safety data sheets, please visit the official 3M webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз.

3M расмий Webсайт: www.3M.com

Always ensure you are using the product in accordance with all local and national safety regulations and guidelines.