Winco санарип таймери TIM-85D колдонуу боюнча колдонмо

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Winco Digital Timer, model TIM-85D. Please read this manual thoroughly before using the device to ensure proper function and longevity.

Сүрөт 1: Алдыңкы view of the Winco Digital Timer TIM-85D, showing the display, HOUR, MIN, START/STOP, and RESET buttons.

Жайгашуу

1. Батареяны орнотуу

1. Таймердин артындагы батарея бөлүкчөсүн табыңыз.
2. Батарея уясынын капкагын ачыңыз.
3. Insert one AAA battery (not included), ensuring the correct polarity (+/-) as indicated inside the compartment.
4. Батарея уясынын капкагын бекем жабыңыз.

2. Баштапкы күйгүзүү

The timer should automatically power on once the battery is correctly installed. The display will show '00:00'.

Figure 2: The Winco Digital Timer TIM-85D shown in hand, illustrating its compact dimensions of approximately 3.25 x 2.38 x 0.75 inches.

Иштөө нускамалары

1. Таймерди коюу (санак)

1. басыңыз HOUR button to set the desired hours. Each press increases the hour by one. Hold to rapidly advance.
2. басыңыз MIN button to set the desired minutes. Each press increases the minute by one. Hold to rapidly advance.
3. To clear the set time, press the RESET баскычы.

2. Таймерди баштоо жана токтотуу

1. After setting the desired time, press the START/STOP артка санаууну баштоо үчүн баскычты басыңыз.
2. Артка саноону тындыруу үчүн, баскычын басыңыз START/STOP button again. The display will flash.
3. Улантуу үчүн басыңыз START/STOP дагы бир жолу.
4. When the countdown reaches zero, an alarm will sound. Press any button to silence the alarm.

3. Count-Up Function (Stopwatch)

1. Ensure the timer display is at '00:00' (press RESET зарыл болсо).
2. басыңыз START/STOP button. The timer will begin counting up from '00:00'.
3. Саноону тындыруу үчүн, баскычын басыңыз START/STOP.
4. To reset the count-up timer to '00:00', press RESET тыныгуу учурунда.

4. Alarm and Silence Switch

The Winco Digital Timer features an audible alarm. Some models may include a silence switch, typically located on the side or back, to disable the alarm sound. Refer to your specific unit for this feature.

5. Additional Functions (Refer to Video)

The following video demonstrates various functions of a similar digital timer, including setting time, count-up/down, 1/100 second count, day count, and clock display. While the visual appearance of the timer in the video may differ from the Winco TIM-85D, the operational principles for these functions are generally applicable.

Техникалык тейлөө

1. Тазалоо

Таймерди жумшак менен сүртүңүз, гamp кездеме. Абразивдүү тазалагычтарды колдонбоңуз же аппаратты сууга салбаңыз.

2. Батареяны алмаштыруу

When the display dims or the timer functions erratically, replace the AAA battery. Follow the battery installation steps outlined in the Setup section.

Проблемаларды чечүү

• Таймер күйбөй жатат: Ensure the battery is correctly installed with proper polarity and is not depleted. Replace the battery if necessary.
• Дисплей күңүрт же бош: Батареяны алмаштырыңыз.
• Сигнал чыкпай жатат: Check if your model has a silence switch and ensure it is in the 'on' or 'audible' position. Ensure the volume is not set to minimum if adjustable.
• Баскычтар жооп бербейт: Remove and reinsert the battery to perform a soft reset. If the issue persists, the unit may require service.

Техникалык шарттар

Кепилдик жана колдоо

Кепилдик маалымат

Winco products are designed for durability and performance. For specific warranty details, please refer to the packaging or contact Winco customer service. Keep your purchase receipt as proof of purchase.

Кардарларды колдоо

For further assistance, technical support, or to inquire about replacement parts, please contact Winco customer service. Contact information can typically be found on the product packaging or the official Winco webсайт.