Introduction
The Wilson Electronics SignalBoost DT (Desktop) Cell Phone Signal Booster is designed to enhance 3G cellular signals within a single room, such as a small home office or a specific area in a residence. This device aims to reduce dropped calls, improve data rates, and provide clearer reception for compatible 3G devices.
Booster amplifies existing cellular signals, improving communication between your cell phone and the nearest cell tower. It supports multiple cell phones and data cards simultaneously within its coverage area.
Пакеттин мазмуну
Орнотууну баштоодон мурун, бардык компоненттер бар экенин текшериңиз:
- SignalBoost DT Amplifier (Booster)
- Indoor Desktop Antenna
- Outdoor Panel Antenna
- Кубаттуу адаптер
- 20ft коаксиалдык кабель
- 30ft коаксиалдык кабель
- Кабель туташтыргычы
- Wall кронштейн
- Mounting Hardware (for pole, wall, or window mount)
- Орнотуу боюнча колдонмо (бул документ)
Орнотуу жана орнотуу
Proper installation is crucial for optimal performance. The system consists of an outdoor antenna, a signal booster, and an indoor desktop antenna. The outdoor antenna captures the existing cellular signal, the booster amplifies it, and the indoor antenna broadcasts the amplified signal to your devices.
1. Outdoor Antenna Placement
Mount the outdoor antenna in a location with the strongest possible existing cellular signal. This is typically on the exterior of the building, pointed towards the nearest cell tower. While window or wall mounting is possible, outdoor mounting generally yields the best results. Ensure the outdoor antenna is at least 20 cm (8 inches) from any person.
2. Connecting the Outdoor Antenna to the Booster
Run one of the coaxial cables (20ft or 30ft, depending on distance) from the outdoor antenna to the SignalBoost DT amplifier. Connect the cable securely to the designated port on the booster.
3. Indoor Desktop Antenna Placement
Place the indoor desktop antenna on a desk or table in the room where you need improved signal. Position it with the Wilson logo facing the direction of your cell phone or data card devices. The indoor antenna should be at least 18 inches away from the amplifier and ideally in a direction opposite to the outdoor antenna to prevent feedback.
4. Connecting the Indoor Antenna to the Booster
Connect the indoor desktop antenna to the SignalBoost DT amplifier using the remaining coaxial cable.
5. Күйгүзүү
Once both antennas are connected, plug the power adapter into the SignalBoost DT amplifier and then into a standard electrical outlet. The booster will power on, and a green light should indicate proper operation.
Орнотуу боюнча видео көрсөтмө
Video: This video demonstrates the basic setup and connection process for the Wilson DT Cell Phone Signal Booster, showing how to connect the outdoor antenna, booster, and indoor antenna, and power up the device.
Иштөө нускамалары
Once installed and powered on, the SignalBoost DT operates automatically. It continuously monitors and amplifies the cellular signal. You should observe an improvement in signal strength on your 3G compatible devices within the coverage area of the indoor desktop antenna.
- Камтуу аймагы: The booster is designed to cover a single room, typically providing improved signal up to 15 feet or more from the indoor antenna.
- Түзмөктүн шайкештиги: Compatible with all US and Canadian cellular providers (excluding iDEN, Nextel, and MIKE). Supports CDMA, TDMA, GSM, and AMPS cell phone technologies, as well as data protocols such as GPRS, 1xRTT, HSDPA, EVDO, and EDGE.
- Бир нече колдонуучулар: The system enhances signal for multiple cell phones and data cards simultaneously.
Техникалык тейлөө
The Wilson SignalBoost DT requires minimal maintenance. Keep the unit and antennas clean and free from dust. Ensure all cable connections remain secure. Avoid placing the booster or antennas in areas with extreme temperatures or direct moisture.
- Regularly check cable connections for tightness.
- Keep the booster unit in a well-ventilated area.
- Do not obstruct the indoor or outdoor antennas.
Проблемаларды чечүү
If you experience issues with your SignalBoost DT, consider the following:
- Сигналдын жакшыруусу жок:
- Сырткы антенна эң күчтүү сигнал булагына (эң жакын уюлдук мунарага) багытталганын текшериңиз.
- Ensure sufficient separation between the outdoor and indoor antennas (at least 20 feet direct distance) to prevent feedback.
- Бардык кабелдик туташтыргычтарды текшериңиз.
- Confirm the booster's power indicator light is green.
- Remember, the booster amplifies an existing signal; it cannot create a signal where none exists. If you have zero bars, the booster may not be effective.
- Dropped Calls or Slow Data:
- Adjust the position of the indoor desktop antenna. Ensure the Wilson logo faces your devices.
- Relocate the indoor antenna to a more central position within the desired coverage area.
- Ensure the indoor antenna is at least 18 inches from the booster unit.
- Үзүлгүс сигнал:
- Башка электрондук түзүлүштөрдөн келип чыгышы мүмкүн болгон тоскоолдуктарды текшериңиз.
- Ensure the outdoor antenna is securely mounted and not obstructed.
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | weBчыгыш |
| Модел | SignalBoost DT 463105 |
| Зымсыз байланыш стандарты | Радио жыштыгы |
| Колдоого алынган жыштык тилкелери | 850 МГц, 1900 МГц |
| Ampкөтөргүч Gain | 56dB / 56dB (824-894 MHz / 1850-1990 MHz) |
| Системалык пайда | 62дБ |
| Максималдуу чыгаруу күчү | 1.3 ватт |
| Noise Figure | 3.5dB nominal |
| Тегиздик | ±5дБ |
| Изоляция | > 90дБ |
| Power талаптар | 120-240В AC, 50-60 Гц, 8Вт |
| Туташтыргычтар | TNC Female / F-Female |
| Өлчөмдөр | 6.2 x 4.2 x 1.5 дюйм |
| Элемент Салмагы | 0.64 фунт |
| Камтуу аймагы | Up to 1,500 Sq Ft (single room) |
| Шайкеш түзмөктөр | Smartphone (3G only) |
Кепилдик маалымат
The Wilson Electronics SignalBoost DT 463105 is backed by a two-year manufacturer's warranty. Please retain your proof of purchase for warranty claims.
Ченемдик маалымат
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards.
Кардарларды колдоо
For further assistance, technical support, or warranty inquiries, please contact weBoost customer service. Refer to the official weBчыгыш webучурдагы байланыш маалыматы үчүн сайт.
Сиз да зыярат кылсаңыз болот weBAmazon'догу oost дүкөнү көбүрөөк продукт маалымат жана ресурстар үчүн.