Neumann U 87 Ai

Neumann U 87 Ai Switchable Studio Microphone

User Manual

Neumann U 87 Ai Studio Microphone in Nickel color

Сүрөт: алдыңкы view of the Neumann U 87 Ai studio microphone in nickel finish, showcasing its classic design and grille.

Introduction

The Neumann U 87 Ai is a large-diaphragm condenser microphone, recognized as an industry standard for professional audio recording. This microphone features three selectable polar patterns, a switchable high-pass filter, and a 10dB pre-attenuation pad, making it versatile for various recording applications. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your U 87 Ai microphone.

Маанилүү коопсуздук маалыматы

  • Always handle the microphone with care to prevent damage to the sensitive capsule.
  • Ensure the microphone is securely mounted on a stand using the provided shockmount to avoid accidental drops.
  • The U 87 Ai requires 48V phantom power. Connect it only to equipment that provides standard phantom power.
  • Avoid exposing the microphone to extreme temperatures, high humidity, or direct moisture.
  • Do not attempt to open or service the microphone yourself. Refer all servicing to qualified personnel.
  • Микрофонду күчтүү магнит талаасынан алыс кармаңыз.

Пакеттин мазмуну

Пакетиңизде бардык буюмдар бар экенин текшериңиз:

  • Neumann U 87 Ai Studio Microphone
  • EA87 Shockmount
  • Айнек
  • XLR кабели
  • Wooden Jeweler's Box
Neumann U 87 Ai microphone in its wooden storage box

Image: The Neumann U 87 Ai microphone resting securely within its custom-fitted wooden storage box, indicating careful packaging.

Жайгашуу

1. таңгактан чыгаруу

Carefully remove the microphone and its accessories from the wooden box. Inspect all components for any signs of damage.

2. Микрофонду орнотуу

Attach the EA87 shockmount to a suitable microphone stand. Gently insert the U 87 Ai microphone into the shockmount, ensuring it is held firmly but without excessive force. The shockmount helps to isolate the microphone from vibrations transmitted through the stand.

3. Микрофонду туташтыруу

Connect the provided XLR cable to the 3-pin XLR connector at the base of the microphone. Connect the other end of the XLR cable to a microphone preamplifier, audio interface, or mixing console that supplies 48V phantom power. Ensure phantom power is turned off on your device before connecting or disconnecting the microphone to prevent potential damage.

Микрофонду иштетүү

1. Polar Patterns

The U 87 Ai offers three selectable polar patterns: omnidirectional, cardioid, and figure-8. These patterns determine the microphone's sensitivity to sound from different directions.

  • аташы: Picks up sound equally from all directions. Ideal for capturing room ambiance or multiple sources.
  • Кардиоид: Most sensitive to sound from the front, with significant rejection from the rear. Suitable for vocals and isolating individual instruments.
  • Сүрөт-8: Equally sensitive to sound from the front and rear, with rejection from the sides. Useful for recording two vocalists facing each other or for M/S stereo techniques.

The polar pattern switch is located on the front of the microphone body, below the grille.

Close-up of the polar pattern selector switch on the Neumann U 87 Ai microphone

Сүрөт: деталдуу view of the polar pattern switch on the microphone body, showing the symbols for omnidirectional, cardioid, and figure-8 patterns.

2. Pre-attenuation Pad (-10dB)

The U 87 Ai features a switchable -10dB pre-attenuation pad. This pad reduces the microphone's output level by 10 decibels, preventing distortion when recording very loud sound sources, such as close-miked drums or guitar amplifiers. Engage this switch when the input signal is too hot for your preampөмүрлүү.

Close-up of the -10dB pre-attenuation pad switch on the Neumann U 87 Ai microphone

Image: A close-up of the -10dB pad switch, clearly labeled, on the side of the microphone body.

3. Low-Frequency Roll-off

A switchable low-frequency roll-off (high-pass filter) is integrated into the U 87 Ai. This filter attenuates frequencies below approximately 100 Hz, which can be useful for reducing unwanted rumble, handling noise, or proximity effect when close-miking. The switch for the low-frequency roll-off is typically located near the polar pattern and pad switches.

4. Оптималдуу жайгаштыруу

Microphone placement significantly impacts the recorded sound. Experiment with distance and angle relative to the sound source to achieve the desired tonal balance and minimize unwanted room reflections. For vocals, a pop filter is recommended to reduce plosives.

Техникалык тейлөө жана кам көрүү

  • Тазалоо: Use a soft, dry cloth to wipe the microphone body. Do not use liquid cleaners or solvents, as they can damage the finish or internal components.
  • Сактагыч: When not in use, store the microphone in its original wooden box or a protective case to shield it from dust, moisture, and physical impact.
  • Колдонуу: Avoid dropping or subjecting the microphone to harsh impacts. The capsule is a delicate component.
  • Курчап турган чөйрө: Operate and store the microphone in a clean, dry environment with stable temperature and humidity.

Проблемаларды чечүү

  • Үн жок:
    • Ensure 48V phantom power is enabled on your preampкөтөргүч же аудио интерфейси.
    • Check all XLR cable connections for proper seating.
    • Башка XLR кабели менен сынап көрүңүз.
    • Verify that the input gain on your preamplifier is set appropriately.
  • Бурмаланган үн:
    • If recording loud sources, engage the -10dB pre-attenuation pad on the microphone.
    • Reduce the input gain on your preampөмүрлүү.
    • Ensure the microphone is not overloaded by excessively loud sound sources.
  • Excessive Bass/Rumble:
    • Engage the low-frequency roll-off switch on the microphone.
    • Increase the distance between the microphone and the sound source to reduce proximity effect.
  • Intermittent Sound/Noise:
    • Бузулган кабелдерди же туташтыргычтарды текшериңиз.
    • Бардык аудио жабдуулардын туура жерге туташтырылышын камсыз кылыңыз.
    • Verify that the microphone is not picking up electrical interference from other devices.

Техникалык мүнөздөмөлөр

СпецификацияНарк
Элемент Салмагы1.1 фунт (500 грамм)
Импеданс200 Ом
Микрофон форма факторуМикрофон гана
Power SourceФантомдук күч (48V)
Ызы-чуунун катышы82 дБ
Каналдардын саны1
Frequency Response20 Гц - 20 кГц
ӨндүрүүчүНейман
UPC615104070226
Элементтин моделинин номериU 87 Ai
Түс атыНикель
Percussion Diameter56 миллиметр
Продукт үчүн сунушталган колдонууSinging, Instrument Recording
Байланыш технологиясыXLR
Туташтыргыч түрүXLR
Шайкеш түзмөктөрAudio Interface, Mixing Console, Digital Recorder
Камтылган компоненттерEA87 Shockmount, Windscreen, Cable, Wooden Jeweler's Box
Полярдык үлгүMultipattern (Omnidirectional, Cardioid, Figure-8)
Аудио сезгичтиги127 децибел

Кепилдик жана колдоо

The Neumann U 87 Ai microphone is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Neumann website. For technical support, service, or replacement parts, please contact an authorized Neumann service center or your dealer.

Көбүрөөк маалымат жана колдоо булактарын таба аласыз Neumann Store on Amazon.

Жок кылуу маалыматы

Do not dispose of this product with household waste. Electronic equipment contains materials that can be harmful to the environment if not disposed of properly. Please consult your local authorities for information on proper disposal and recycling options for electronic devices.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.