The Elkay Space-ette Cooler (Model FD7003L1Z) is a self-contained, electric refrigerated floor model water cooler designed for installations with limited space. It features a slim profile and a durable vinyl clad finish. The unit provides chilled water through a hermetically sealed refrigeration system and is rated for indoor use.
Сүрөт 1: Алдыңкы view of the Elkay FD7003L1Z Space-ette Cooler.
Негизги өзгөчөлүктөрү:
Traditional small footprint floor mount design for space-saving installations.
Hermetically sealed refrigeration system for chilled water.
Durable and attractive vinyl clad finish.
Mechanical top bubbler button for water dispensing.
Имараттын ичинде колдонууга бааланган.
Орнотуу жана орнотуу
This section provides general guidelines for setting up your Elkay Space-ette Cooler. Professional installation by a qualified plumber and electrician is recommended to ensure proper function and safety.
1. Пакеттен чыгаруу:
Муздаткычты анын таңгагынан кылдаттык менен чыгарыңыз.
Агрегатты ар кандай жеткирүү зыянын текшериңиз. Сиздин жеткирүүчүңүзгө кандайдыр бир зыян жөнүндө дароо кабарлаңыз.
Бардык компоненттер бар экенин текшериңиз.
2. Location Selection:
Choose a level, stable surface for placement. The unit is designed for floor mounting.
Ensure adequate clearance around the unit for ventilation, especially at the rear and sides where the refrigeration system is located.
The cooler is rated for indoor use only. Avoid direct sunlight or placement near heat sources.
The cabinet design allows for flush-to-wall installation, but ensure access for maintenance and connections.
Figure 2: Dimensions of the Elkay FD7003L1Z Space-ette Cooler.
3. Water Supply Connection:
Connect the unit to a potable cold water supply line.
Install a shut-off valve in the water supply line for easy maintenance.
Бардык байланыштар коопсуз жана агып кетпегендигин текшериңиз.
4. Дренажды туташтыруу:
Connect the cooler's drain line to an appropriate waste receptor or floor drain.
Ensure proper slope for drainage and prevent standing water.
5. Электрдик туташуу:
The unit operates on standard household electrical power (Corded Electric).
Электр шнурын туура жерге туташтырылган электр розеткасына сайыңыз.
Узарткычтарды колдонбоңуз.
Ensure the electrical supply matches the unit's requirements (refer to the product label for specific voltagд жана ampөчүрүү).
Иштөө нускамалары
Once properly installed and connected, your Elkay Space-ette Cooler is ready for use.
1. Initial Start-up:
After connecting water and power, allow the unit to run for approximately 30 minutes to chill the water.
Dispense a small amount of water to flush any air from the lines.
2. Dispensing Water (Bubbler):
To dispense water, press the mechanical top bubbler button located on the top surface of the cooler.
Суунун агымын токтотуу үчүн баскычты коё бериңиз.
3. Adjusting Water Temperature:
The refrigeration system is factory-set for optimal cooling. If temperature adjustment is needed, consult a qualified service technician.
Техникалык тейлөө
Regular maintenance ensures the longevity and hygienic operation of your water cooler.
1. Сыртын тазалоо:
Wipe down the vinyl clad exterior with a soft, damp кездеме жана жумшак самын.
Финишке зыян келтирүүчү абразивдүү тазалагычтардан же эриткичтерден качыңыз.
For the stainless steel top, use a stainless steel cleaner and polish in the direction of the grain.
2. Cleaning the Bubbler and Basin:
Regularly clean the bubbler head and the basin area with a mild disinfectant solution.
Ensure the drain is clear of any debris to prevent water accumulation.
3. Condenser Coil Cleaning:
Periodically clean the condenser coils (typically located at the rear or bottom of the unit) to ensure efficient cooling.
Disconnect power before cleaning. Use a brush or vacuum cleaner to remove dust and lint.
4. Leak Inspection:
Regularly check all water connections for leaks. Tighten any loose fittings.
Проблемаларды чечүү
This section addresses common issues you might encounter with your water cooler.
1. No Water Flow:
Суу менен камсыздоону текшерүү: Суу берүүчү клапан ачык экенин текшериңиз.
Кинксти текшерүү: Inspect the water lines for any kinks or blockages.
Күч: Verify the unit is plugged in and receiving power.
2. Water Not Cold:
Күч: Ensure the unit is plugged in and receiving power.
Вентиляция: Check that the condenser coils are clean and not obstructed, allowing for proper airflow.
Айлана-чөйрөнүн температурасы: The unit's cooling efficiency can be affected by high ambient temperatures.
Баштапкы муздатуу: Allow sufficient time (at least 30 minutes) for the water to chill after initial setup or power restoration.
3. Leaks:
Байланыштары: Inspect all water inlet and drain connections for tightness.
Drain Blockage: Ensure the drain is not clogged, causing water to overflow.
4. Unusual Noise:
Деңгээл беттик: Ensure the unit is on a level surface to prevent vibrations.
Күйөрман: A fan noise is normal during cooling cycles. If the noise is excessive or unusual, contact support.
If these troubleshooting steps do not resolve the issue, please contact Elkay customer support or a qualified service technician.
Техникалык шарттар
Өзгөчөлүк
Деталь
Модель номери
FD7003L1Z
Бренд
Элкай
Түс
Light Gray Granite
Материал
Винил
Кубаттуулугу
3 GPH (саатына галлон)
Продукциянын өлчөмдөрү (D x W x Y)
12"D x 12"W x 38"H
Орнотуу түрү
Полго орнотулган
Power Source
Электр зымдары
Ватtage
1312.5 ватт
Элемент Салмагы
51 фунт
Жайгашуу мүмкүнчүлүгү
Top-reservoir
Кепилдик жана колдоо
Кепилдик маалыматы:
The Elkay FD7003L1Z Space-ette Cooler comes with a Чектелген Кепилдик. For specific details regarding coverage, duration, and terms, please refer to the warranty documentation included with your product or visit the official Elkay webсайт.
Кардарларды колдоо:
For technical assistance, service, or warranty claims, please contact Elkay customer support. Contact information can typically be found on the manufacturer's webсайтында же продуктунун таңгагында.
When contacting support, please have your model number (FD7003L1Z) and serial number (if applicable) ready.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.