Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle Instruction Manual

1. Introduction and Overview

The Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle is designed to provide safe and reliable electrical connections in residential and commercial environments. This receptacle complies with the 2011 National Electrical Code (NEC) Article 406.12, which mandates tamper-resistant receptacles in dwelling units to enhance safety, particularly for children.

Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:

• Tampкүчөтүлгөн коопсуздук үчүн эр-резиденттүү дизайн.
• Durable, impact-resistant thermoplastic face and back body.
• Decorator style for modern aesthetics.
• Easy installation with backed-out terminal screws and built-in wire stripper.

2. Коопсуздук маалыматы

ЭСКЕРТҮҮ: Risk of electric shock or electrocution. Improper installation can result in serious injury or death. Always turn off power at the circuit breaker or fuse box before installing or servicing this device. If you are unsure about any part of these instructions, consult a qualified electrician.

• Электр зымдары менен иштөөдөн мурун ар дайым негизги тейлөө панелинен электр кубатын өчүрүңүз.
• Изоляцияланган кол каптар жана коргоочу көз айнек сыяктуу тиешелүү жеке коргонуу шаймандарын (ЖКК) колдонуңуз.
• Бардык зым байланыштары коопсуз жана туура изоляцияланганын текшериңиз.
• Түзмөктүн көрсөтүлгөн электрдик кубаттуулук көрсөткүчтөрүнөн ашпаңыз.
• Бул аппарат имараттын ичинде гана колдонууга арналган.
• Comply with all local and national electrical codes.

3. Пакеттин мазмуну

The package contains one (1) Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle.

4. Орнотуу

Follow these steps for proper installation of your Eaton TR1107W receptacle:

1. Кубатты өчүрүү: Locate the circuit breaker or fuse that controls the power to the outlet where you will be installing the receptacle. Turn it OFF. Verify power is off using a voltage сыноочу.
2. Эски идиштерди алып салыңыз (эгер бар болсо): Carefully remove the wallplate and unscrew the old receptacle from the electrical box. Disconnect the wires, noting which wire was connected to which terminal.
3. Зымдарды даярдоо: Strip approximately 1/2 inch (12.7 mm) of insulation from the ends of the circuit wires. The receptacle features a built-in wire stripper for No.14 and No.12 wire to assist with this step.
4. Зымдарды туташтыруу: The Eaton TR1107W receptacle supports side-wire connections and accepts up to No.10 solid wire. Terminal screws are backed out and ready for wiring.
   • туташтыруу жашыл же жылаңач жез жер зым to the green grounding screw.
   • туташтыруу ак (нейтралдуу) зым to the silver-colored terminal screws.
   • туташтыруу кара (ысык) зым to the brass-colored terminal screws.
   Бардык байланыштар бекем жана коопсуз экендигин текшериңиз.
5. Суу сактагыч: Carefully fold the wires into the electrical box. Insert the receptacle into the box and secure it with the mounting screws provided. The extra long and extra wide mounting straps aid in stable installation.
6. Wallplate орнотуу: Attach a compatible decorator wallplate (not included) over the receptacle.
7. Күчтү калыбына келтирүү: Turn the power back ON at the circuit breaker or fuse box. Test the receptacle to ensure proper operation.

Сүрөт 1: Алдыңкы view of the Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle. This image highlights the decorator style and the two tampтуруштуу розеткалары.

5. Операция

The Eaton TR1107W is a tamper-resistant receptacle. This means it has an internal shutter mechanism that prevents foreign objects from being inserted into the slots. To insert a plug, apply even pressure to both prongs simultaneously. This will open the shutters and allow the plug to enter. If a plug does not insert easily, ensure both prongs are aligned and apply firm, even pressure.

6. Техникалык тейлөө

The Eaton TR1107W receptacle requires minimal maintenance. Periodically inspect the receptacle and wallplate for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, turn off power at the circuit breaker and replace the device immediately. Clean the surface with a soft, damp кездеме; абразивдүү тазалагычтардан же эриткичтерден качыңыз.

7. Кыйынчылыктарды

• No Power at Receptacle:
  • Check the circuit breaker or fuse for the circuit. Reset the breaker or replace the fuse if tripped/blown.
  • Ensure all wire connections to the receptacle are secure. Turn off power before checking connections.
  • Test the receptacle with a known working appliance.
• Plug Difficult to Insert:
  • This is normal for tamper-resistant receptacles. Ensure both prongs of the plug are aligned and apply firm, even pressure simultaneously.
  • Do not force the plug, as this can damage the receptacle or the plug.
• Receptacle is Hot to the Touch:
  • Immediately disconnect power to the circuit. This could indicate an overload or a faulty connection. Consult a qualified electrician.

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information and technical support, please contact Eaton customer service directly. Refer to the official Eaton webакыркы байланыш маалыматтары жана кепилдик шарттары үчүн сайт же продукт таңгак.

Итон Webсайт: www.eaton.com