Introduction
This manual provides instructions for the proper installation, operation, and maintenance of your LASCO 10-2117 Flex Braided Vinyl Water Supply Line. This product is designed to connect faucets to a water source, ensuring a reliable and lead-free connection for various plumbing applications.
Коопсуздук маалыматы
- Always turn off the main water supply before beginning any plumbing work to prevent water damage.
- Ensure all connections are hand-tightened first, then gently tightened with an appropriate wrench to prevent overtightening, which can damage fittings and cause leaks.
- This product is lead-free and meets California AB-1953, Vermont, and new federal standards for low lead applications. It is Uniform Plumbing Code (UPC) certified and approved, ensuring product quality and safety.
- If you are unsure about any installation steps or encounter difficulties, consult a qualified plumber.
Продукт бүттүview
The LASCO 10-2117 is a 16-inch braided vinyl water supply line featuring a 3/8-inch female compression fitting on one end and a 1/2-inch female iron pipe (FIP) fitting on the other. It is engineered for flexibility, durability, and ease of installation in residential and commercial plumbing systems.
Image: The LASCO 10-2117 braided vinyl water supply line, illustrating its flexible construction and distinct end fittings.
Негизги өзгөчөлүктөрү:
- Өлчөмү: 3/8-Inch Female Compression x 1/2-Inch Female Iron Pipe (FIP) x 16-Inch length.
- Материал: Braided vinyl construction for enhanced flexibility and resistance to kinking.
- Шайкештик: Lead-free, meeting California AB-1953, Vermont, and federal standards.
- Тастыктоо: UPC certified and approved for plumbing applications.
Орнотуу жана орнотуу
Follow these steps carefully to properly install your LASCO 10-2117 water supply line:
- аймакты даярдоо: Locate the main water shut-off valve for your home or the specific area you are working in and turn off the water supply completely. Open the faucet to drain any residual water from the lines.
- Inspect Fittings: Verify that the faucet's supply shank and the water shut-off valve have compatible male threads for the 3/8-inch compression and 1/2-inch FIP female fittings of the supply line, respectively.
- Кранга туташуу: Attach the 3/8-inch female compression end of the supply line to the corresponding male fitting on the faucet's supply shank. Hand-tighten the connection first, then use an adjustable wrench to tighten an additional 1/4 to 1/2 turn. Avoid overtightening, as this can damage the fitting or washer.
- Connect to Shut-off Valve: Attach the 1/2-inch female iron pipe (FIP) end of the supply line to the male fitting on the water shut-off valve. Hand-tighten first, then use an adjustable wrench to tighten an additional 1/4 to 1/2 turn. Do not overtighten.
- Байланыштарды текшерүү: Visually inspect both connections to ensure they are secure, properly aligned, and free from any visible gaps.
- Суу менен камсыздоону калыбына келтирүү: Slowly and gradually turn on the main water supply.
- Агышууларды текшерүү: Carefully inspect both ends of the supply line for any signs of leaks, drips, or moisture. If a leak is detected, immediately turn off the water supply, gently tighten the problematic connection, and recheck. Repeat if necessary, but do not force the connection.
Операция
Once properly installed, the LASCO 10-2117 water supply line operates passively by conveying water from the shut-off valve to the faucet. Ensure that the shut-off valves are fully open for optimal water flow. Regular visual checks for any signs of leaks or damage are recommended.
Техникалык тейлөө
- Үзгүлтүксүз текшерүү: Periodically inspect the entire length of the supply line for any signs of wear, kinks, cracks, bulges, or corrosion, especially near the fittings.
- Агышты аныктоо: Routinely check all connections for drips or moisture. Early detection of small leaks can prevent significant water damage.
- Тазалоо: If necessary, wipe the exterior of the hose with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals that could degrade the vinyl material.
- Алмаштыруу: If any damage, significant wear, or persistent leaks are observed, it is strongly recommended to replace the supply line immediately to prevent potential water damage and ensure plumbing integrity.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Байланыш чекитинде агып кетүү | Loose connection, damaged washer/gasket, cross-threaded fitting, overtightened fitting. | Turn off water supply. Gently tighten the connection. If leak persists, disassemble, inspect for damaged washers/gaskets and replace if necessary. Ensure fittings are not cross-threaded. Avoid overtightening. |
| No water flow or reduced flow | Water supply turned off, kinked hose, debris in the line (rare for new installation). | Ensure main water supply and shut-off valve are fully open. Check the supply line for any kinks or sharp bends that might restrict flow. |
Техникалык шарттар
- Модель номери: 10-2117
- Өлчөмү: 3/8-Inch Female Compression x 1/2-Inch Female Iron Pipe (FIP) x 16-Inch
- Материал: Braided Poly Vinyl
- Түсү: Ак
- Элементтин өлчөмдөрү (L x W x Y): 16 x 0.9 x 0.9 дюйм
- Элемент Салмагы: 3.52 унция
- Сертификаттар: Lead-Free (California AB-1953, Vermont, Federal Standards), UPC Certified
- Өндүрүүчү: LASCO
- UPC: 052151815460
Кепилдик жана колдоо
For specific warranty information or technical support regarding your LASCO 10-2117 water supply line, please contact LASCO customer service directly. Refer to the product packaging or the official LASCO webэң акыркы байланыш маалыматтары жана колдоо ресурстары үчүн сайт.