1. Продукт бүтүп калдыview
The TP-Link TL-SF1008P is an 8-Port 10/100Mbps Desktop Switch with 4 PoE+ Ports, designed to provide a seamless network connection. It integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities. Four of the eight Auto-Negotiation RJ45 ports (Port 1 to Port 4) support Power over Ethernet (PoE+) functionality. These PoE+ ports can automatically detect and supply power to IEEE 802.3at/af compliant Powered Devices (PDs).
This switch allows for the transmission of electrical power along with data over a single cable, enabling network expansion in locations without readily available power lines or outlets. It is suitable for powering devices such as Access Points (APs), IP Cameras, or IP Phones.
Сүрөт 1: Алдыңкы view of the TP-Link TL-SF1008P PoE+ Switch.
2. Пакеттин мазмуну
Пакетиңизде төмөнкү заттар бар экенин текшериңиз:
- TL-SF1008P Switch
- Кубаттуу адаптер
- Электр кабели
- Орнотуу боюнча колдонмо
- Резина буттары
3. Орнотуу жана орнотуу
The TL-SF1008P is designed for easy installation and use, requiring no software configuration. It features a plug-and-play design.
3.1 Физикалык орнотуу
Коммутаторду столдун үстүнө коюуга же дубалга орнотууга болот. Түзмөктүн айланасында жетиштүү желдетүүнү камсыз кылыңыз.
Figure 2: Simple Plug and Play setup involves plugging in the power and connecting devices.
3.2 Түзмөктөрдү туташтыруу
Connect your network devices (e.g., router, NVR, computers, printers, IP cameras, IP phones, access points) to the RJ45 ports on the switch. Ports 1-4 are PoE+ enabled.
3-сүрөт: Мисample application scenario showing the TL-SF1008P connecting various devices, including PoE-powered ones.
4. Иштөө режимдери жана функциялары
The TL-SF1008P offers several features to optimize network performance and reliability.
4.1 Узартуу режими
Extend Mode allows for data and power PoE transmission over distances up to 250 meters, which is ideal for surveillance systems where devices may be located far from the switch. When Extend Mode is active, the port speed will be downgraded to 10 Mbps.
Figure 4: Comparison of standard 100m transmission and 250m Extend Mode transmission for IP cameras.
4.2 Priority Mode
The switch incorporates a priority function to protect the system when the total PoE power consumption exceeds the budget. If the power consumption of all PoE PDs is greater than or equal to 53W, a priority will be assigned among the PoE ports (Port 1 > Port 2 > Port 3 > Port 4). The system will then cut off power to the lowest-priority port to protect the system. This mode ensures high-quality transmission for critical applications like video or voice data.
4.3 PoE автоматтык калыбына келтирүү
PoE Auto Recovery automatically detects and reboots unresponsive PoE-powered devices. This feature eliminates the need for manual monitoring or resetting, enhancing system reliability.
Figure 5: Diagram illustrating the PoE Auto Recovery function, which reboots unresponsive PoE devices.
5. Техникалык шарттар
| Өзгөчөлүк | Description |
|---|---|
| Продукциянын өлчөмдөрү | Узундугу 11.6" x Туурасы 7.1" x Бийиктиги 1.7" (294 x 180 x 44 мм) |
| Элемент Салмагы | 1.15 грамм (0.041 унция) |
| Тtage | 48 вольт |
| Иштин материалы | Металл |
| Maximum Power (Switch) | 60.2 Ватт |
| PoE Power бюджети | 66W (4 PoE+ Ports) |
| Max. Power per PoE+ Port | 30 Вт |
| Жогорку температура рейтинги | 40 градус |
| Interface Type | 8 10/100Mbps RJ45 порттору (АВТОМАТТЫК Сүйлөшүүлөр/АВТОМАТТЫК MDI/MDIX) |
| Маалыматтарды өткөрүү ылдамдыгы | 100 Мегабит секундасына |
| Учурдагы рейтинг | 1.25 Amps |
| Модель номери | TL-SF1008P |
| Шайкеш түзмөктөр | Camera, Printer, IP Phone, Access Point |
| Агымды башкаруу | IEEE 802.3X |
| Күйөрмансыз дизайн | Ооба |
6. Техникалык тейлөө
To ensure optimal performance and longevity of your TP-Link TL-SF1008P switch, consider the following maintenance guidelines:
- Экологиялык шарттар: Operate the switch within the specified temperature range (0°C to 40°C) and humidity levels. Avoid exposing the device to direct sunlight, excessive heat, or moisture.
- Тазалоо: Periodically clean the exterior of the switch with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and obstructions.
- Кабелдик башкаруу: Keep network cables organized and properly secured to prevent accidental disconnections or damage.
- Электр камсыздоо: Use only the provided power adapter. Ensure the power connection is secure and stable.
7. Кыйынчылыктарды
If you encounter issues with your TL-SF1008P switch, consider the following basic troubleshooting steps:
- Кубат жок: Ensure the power adapter is securely connected to both the switch and a working power outlet. Check the power LED indicator on the switch.
- Шилтеме жок/Аракет: Verify that the Ethernet cables are correctly connected to both the switch and the connected device. Check the Link/Act LEDs for the respective ports. Try using a different Ethernet cable.
- PoE түзмөгү күйбөй жатат: Confirm that the connected device is IEEE 802.3at/af compliant. Check the PoE Max LED on the switch; if it's red, the system power might be overloaded, and Priority Mode may be active. Ensure the total power consumption of all PoE devices does not exceed the 66W budget.
- Slow Connection in Extend Mode: This is expected behavior. When Extend Mode is active, the port speed is intentionally reduced to 10 Mbps to achieve longer transmission distances.
For more detailed troubleshooting or persistent issues, please refer to the support section.
8. Кепилдик жана колдоо
The TP-Link TL-SF1008P is backed by an industry-leading 3-year warranty.
8.1 Техникалык колдоо
Акысыз техникалык колдоо дүйшөмбүдөн жумага чейин саат 6дан кечки 6га чейин жеткиликтүү.
For assistance, you can contact TP-Link support:
- Телефон: (866) 225-8139
- Webсайт: myproducts.tp-link.com/us
- Электрондук почта: support.USA@tp-link.com
Figure 6: TP-Link contact information for support.