Tork 653008 W2 Maxi Centerfeed Dispenser Instruction Manual

Продукт бүттүview

The Tork 653008 W2 Maxi Centerfeed Dispenser is designed for efficient, single-hand paper towel dispensing. Its robust construction and smart design make it suitable for various professional environments, improving workflow and productivity.

Сүрөт: алдыңкы view of the Tork 653008 W2 Maxi Centerfeed Dispenser.

Негизги өзгөчөлүктөрү:

• Жеңил толтуруу: Side-opening lid for quick and simple paper roll replacement.
• Туруктуу курулуш: Robust hinges ensure longevity and resistance to wear.
• Кагазды коргоо: Splash-proof cover keeps paper dry and hygienic.
• Мейкиндикти үнөмдөөчү дизайн: Wall-mounted installation frees up valuable counter space.
• Optimized Dispensing: Allows users to take as much paper as needed, or single sheets, with one hand.
• Шайкештик: Designed for W2 centerfeed rolls, including Tork references 129262, 151203, 130041, 130052, 530237.

Орнотуу жана орнотуу

The Tork 653008 dispenser is designed for wall mounting. Ensure you have the necessary tools before beginning installation.

Керектүү куралдар:

• Бургулоо
• Screwdriver
• Өлчөө лентасы
• Карандаш
• Деңгээл
• Appropriate wall anchors and screws (not included)

Орнотуу кадамдары:

1. Жайгашкан жерди тандоо: Select a suitable wall location, ensuring sufficient clearance for refilling and use. The recommended height for installation is typically between 120-130 cm (47-51 inches) from the floor to the bottom of the dispenser, but adjust as needed for accessibility.
2. Бургулоо пункттарын белгилөө: Hold the dispenser against the wall at the desired height. Use a level to ensure it is straight. Mark the positions for the mounting screws through the pre-drilled holes on the back of the dispenser.
3. Бургулоо тешиктери: Drill holes at the marked points. Use a drill bit appropriate for your wall type and the chosen wall anchors.
4. Анкерлерди киргизүү: Дубал анкерлерин бургуланган тешиктерге салыңыз.
5. Mount Dispenser: Align the dispenser with the anchors and secure it to the wall using screws. Ensure the dispenser is firmly attached and does not wobble.
6. Кагаз түрмөгүн жүктөө: Open the side cover of the dispenser. Place a compatible Tork W2 centerfeed roll inside. Pull the leading edge of the paper through the dispensing opening at the bottom. Close the cover securely.

Иштөө нускамалары

The Tork 653008 dispenser provides easy, single-hand access to paper towels.

Dispensing Paper:

1. Locate the paper towel emerging from the bottom center of the dispenser.
2. Grasp the end of the paper towel firmly with one hand.
3. Pull the paper towel downwards and slightly away from the dispenser to tear off the desired length. The dispenser's design allows for controlled dispensing, whether you need a small sheet or a longer piece.

Image: Diagram illustrating the process of pulling paper from a centerfeed dispenser.

Image: Tork dispenser highlighting its ease of use, approved by the Swedish Rheumatism Association.

Техникалык тейлөө

Regular maintenance ensures optimal performance and hygiene of your Tork dispenser.

Refilling the Dispenser:

1. When the paper roll is empty or nearly empty, open the side cover of the dispenser.
2. Remove any remaining paper core or scraps.
3. Place a new, compatible Tork W2 centerfeed roll into the dispenser.
4. Pull the leading edge of the paper from the center of the roll and thread it through the dispensing opening at the bottom of the dispenser.
5. Close the side cover securely until it clicks into place.

Диспенсерди тазалоо:

• Wipe the exterior of the dispenser regularly with a damp cloth and a mild, non-abrasive cleaning solution.
• Avoid using harsh chemicals or abrasive scrubbers, as these can damage the plastic surface.
• Ensure the dispenser is dry after cleaning to maintain hygiene. The splash-proof cover helps protect the internal paper roll from moisture.

Проблемаларды чечүү

If you encounter issues with your Tork 653008 dispenser, refer to the following common solutions:

Техникалык шарттар

Кепилдик жана колдоо

For information regarding product warranty, please refer to the documentation provided at the time of purchase or visit the official Tork webсайт.

For further assistance, technical support, or to inquire about spare parts, please contact Tork customer service or visit the Tork brand store:

Tork Official Brand Store