Electro-Voice ELX112P

Electro-Voice ELX112P 12-inch Live X Two-Way Powered Loudspeaker

Instruction Manual

1. Киришүү

This manual provides essential information for the safe and effective operation of your Electro-Voice ELX112P 12-inch Live X Two-Way Powered Loudspeaker. Please read this manual thoroughly before using the product to ensure proper setup, operation, and maintenance. Retain this manual for future reference.

Фронт view of the Electro-Voice ELX112P powered loudspeaker, showing the protective grille and the EV logo.

Сүрөт 1: Алдыңкы view of the ELX112P Loudspeaker.

2. Коопсуздук маалыматы

ЭСКЕРТҮҮ: To reduce the risk of electric shock, do not expose this appliance to rain or moisture. Do not remove the cover. No user-serviceable parts inside. Refer servicing to qualified service personnel.

  • Бул нускамаларды окуңуз.
  • Бул көрсөтмөлөрдү сактаңыз.
  • Бардык эскертүүлөргө кулак сал.
  • Бардык нускамаларды аткарыңыз.
  • Бул аппаратты суунун жанында колдонбоңуз.
  • Кургак чүпүрөк менен гана тазалаңыз.
  • Эч кандай желдетүүчү тешиктерди жаап албаңыз. Өндүрүүчүнүн көрсөтмөлөрүнө ылайык орнотуу.
  • Радиаторлор, жылуулук регистрлери, мештер же башка аппараттар (анын ичинде) сыяктуу жылуулук булактарынын жанына орнотпоңуз ampкөтөргүчтөр) жылуулукту пайда кылуучу.
  • Поляризацияланган же жерге туташтыруу тибиндеги сайгычтын коопсуздук максатын жокко чыгарбаңыз. Поляризацияланган сайгычтын эки бычагы бар, бири экинчисинен кенен. Жерге туташтыруу тибиндеги сайгычтын эки бычак жана үчүнчү жерге туташтыруучу тиштери бар. Кең бычак же үчүнчү тиш сиздин коопсуздугуңуз үчүн берилген. Эгерде берилген сайгыч розеткага туура келбесе, эскирген розеткаңызды алмаштыруу үчүн электрикке кайрылыңыз.
  • Электр шнурунун басылып кетүүсүнөн же кысып калуудан сактаңыз, өзгөчө сайгычтарда, розеткаларда жана алар аппараттан чыга турган жеринде.
  • Өндүрүүчү тарабынан көрсөтүлгөн тиркемелерди/аксессуарларды гана колдонуңуз.
  • Өндүрүүчү белгилеген же аппарат менен бирге сатылган араба, стенд, штатив, кронштейн же үстөл менен гана колдонуңуз. Араба колдонулганда, оодарылып кетүүдөн жаракат албаш үчүн арабаны/аппаратты айкалыштырууда этият болуңуз.
  • Бул аппаратты чагылгандуу бороондордо же узак убакыт бою колдонбогондо электр розеткасынан ажыратыңыз.
  • Бардык тейлөөлөрдү квалификациялуу тейлөө кызматкерлерине тапшырыңыз. Аппарат кандайдыр бир зыянга учураганда, мисалы, кубат берүүчү шнур же сайгыч бузулганда, суюктук төгүлгөндө же аппараттын ичине нерселер түшкөндө, аппарат жамгырга же нымдуулукка дуушар болгондо, нормалдуу иштебей калганда тейлөө талап кылынат. , же түшүрүлгөн.

3. Өзгөчөлүктөрү

The Electro-Voice ELX112P loudspeaker is designed for high-performance audio applications, offering a robust and versatile solution for various sound reinforcement needs.

  • Equipped with a 12-inch woofer and a 1.5-inch high-frequency titanium compression driver.
  • Offers a broad frequency range of 50 Hz to 20 kHz.
  • Capable of producing a maximum sound pressure level (SPL) of 132 dB.
  • Features a 1000 W Class D lightweight amplifier, designed for efficient operation without requiring cooling fans.
  • Provides versatile input and output options for easy connectivity and control.

4. Пакеттин мазмуну

Upon unpacking your ELX112P loudspeaker, please verify that the following items are included:

  • Electro-Voice ELX112P Powered Loudspeaker
  • AC кубат кабели
  • Бул Колдонмо

Эгерде кандайдыр бир буюмдар жок же бузулуп калса, дароо дилериңизге кайрылыңыз.

5. Орнотуу

5.1 Физикалык жайгаштыруу

The ELX112P loudspeaker offers flexible placement options to suit various applications.

  • Этаж: The speaker can be placed directly on a stable, flat surface.
  • Уюлду орнотуу: Utilize the integrated pole mount socket on the bottom of the speaker for use with a standard speaker pole or tripod stand. Ensure the stand is stable and rated for the speaker's weight (approximately 48 lbs).
Electro-Voice ELX112P loudspeaker mounted on a tripod stand, positioned for optimal sound projection.

Figure 2: ELX112P on a tripod stand.

  • Мониторду колдонуу: The cabinet design allows for use as a floor monitor, angled towards the performer.
Electro-Voice ELX112P loudspeaker positioned on its side, angled as a floor monitor.

Figure 3: ELX112P configured as a floor monitor.

5.2 Байланыштар

The rear panel of the ELX112P provides various input and output options for connecting to your audio system.

Жакын план view of the rear control panel of the Electro-Voice ELX112P loudspeaker, showing inputs, outputs, and control knobs.

Figure 4: Rear Control Panel of the ELX112P.

  • Input 1 (XLR/TRS Combo Jack): This input accepts both XLR and 1/4-inch TRS connectors. It is suitable for line-level signals from mixers, instruments, or other audio devices.
  • Input 2 (XLR/TRS Combo Jack & RCA): This input also accepts XLR and 1/4-inch TRS connectors, and additionally features stereo RCA inputs. It is designed for line-level or microphone-level signals.
  • Link Output (XLR): This XLR output allows you to send the mixed signal from Input 1 and Input 2 to another powered loudspeaker or audio device.
  • Кубат киргизүү: Connect the supplied AC power cable here. Ensure the power switch is in the OFF position before connecting to a power source.

6. Иштөө нускамалары

6.1 Күйгүзүү/өчүрүү

To power on the loudspeaker, ensure all connections are secure and then flip the POWER switch located at the bottom of the rear panel to the ON position. To power off, flip the switch to the OFF position.

6.2 Level Control

Each input (Input 1 and Input 2) has an independent LEVEL control knob. Adjust these knobs to achieve the desired volume for each input source. Start with the knobs at their minimum setting and gradually increase to prevent sudden loud sounds.

6.3 Киргизүү Тандоо

For Input 2, a small button allows selection between MIC and LINE level. Press this button for microphone-level signals and ensure it is unpressed for line-level signals. For Input 1, the INPUT SELECT switch allows you to choose between 'XLR/TRS 1' (Input 1 only) or '1+2' (mix of Input 1 and Input 2 for the Link Output).

6.4 Loudspeaker Mode

The ELX112P features a LOUDSPEAKER section with controls to optimize its sound output:

  • Деңгээл: This master level control adjusts the overall output volume of the loudspeaker.
  • Normal/Boost: This switch allows you to select between a flat frequency response ('Normal') or a boosted low-end response ('Boost') for enhanced bass.
  • Full Range/With Sub: This switch optimizes the speaker's frequency response for standalone use ('Full Range') or when paired with a subwoofer ('With Sub'), which typically applies a high-pass filter to the ELX112P.
  • LIMIT LED: This indicator illuminates when the internal limiter is active, preventing distortion. If it flashes frequently or stays lit, reduce the input or master level.

6.5 Logo LED

The LOGO switch on the rear panel controls the illumination of the Electro-Voice logo on the front grille. Set to ON for illumination or OFF to disable.

7. Техникалык тейлөө

Proper maintenance ensures the longevity and optimal performance of your ELX112P loudspeaker.

  • Тазалоо: Clean the cabinet with a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes. Ensure no liquids enter the speaker grille or control panel.
  • Сактагыч: When not in use, store the loudspeaker in a dry environment, away from extreme temperatures and direct sunlight. Consider using a protective cover to prevent dust accumulation.
  • Текшерүү: Periodically check all cables and connectors for signs of wear or damage. Replace any damaged components immediately.

8. Кыйынчылыктарды

This section addresses common issues you might encounter with your ELX112P loudspeaker.

КөйгөйМүмкүн себепЧечим
Үн чыгышы жок
  • Кубат кабели туташкан эмес же кубат өчүк.
  • Input level controls are too low.
  • Баштапкы түзмөк сигнал жөнөтпөй жатат.
  • Incorrect input selected or cable issue.
  • Кубат кабели бекем туташтырылганын жана кубат которгучу КҮЙҮК экенин текшериңиз.
  • Increase Input 1/2 and Master Level controls.
  • Verify source device is powered on and playing audio.
  • Check input cables and ensure correct input selection.
Hissing or static noise
  • High input gain or master level.
  • Негизги цикл маселеси.
  • Бузулган кабель.
  • Reduce input gain and master level.
  • Бардык жабдуулар бир электр чынжырында экенин текшериңиз же жерге туташтыруучу изоляторду колдонуңуз.
  • Башка кабелди колдонуп көрүңүз.
Sound is distorted or clipping
  • Input signal is too high.
  • Master level is too high.
  • LIMIT LED is constantly lit.
  • Reduce the input level from your source device.
  • Lower the Input 1/2 and Master Level controls on the speaker.
  • Ensure the LIMIT LED only flashes occasionally.
Lacking high-end frequencies or muffled sound
  • Incorrect Loudspeaker Mode setting.
  • Faulty high-frequency driver.
  • Ensure 'Full Range' mode is selected if not using a subwoofer.
  • If the problem persists, contact qualified service personnel.
Lacking bass or low-end frequencies
  • Incorrect Loudspeaker Mode setting.
  • 'Boost' mode not engaged.
  • Ensure 'Full Range' mode is selected if not using a subwoofer.
  • Try engaging the 'Boost' mode for enhanced bass.
  • Consider adding a dedicated subwoofer for extended low-frequency response.

If you experience issues not covered here, or if the problem persists after attempting these solutions, please contact Electro-Voice customer support or a qualified service technician.

9. Техникалык шарттар

Detailed technical specifications for the Electro-Voice ELX112P Powered Loudspeaker:

  • Модель аты: ELX112P
  • Динамик түрү: Woofer, Two-Way Full-Range
  • Вуфердин диаметри: 12 дюйм
  • Tweeter диаметри: 1.5 дюйм
  • Чыгуу Wattage: 1000 Ватт (D классы) ampөмүрлүү)
  • Жыштык диапазону: 50 Гц - 20 кГц
  • Максималдуу SPL: 132 дБ
  • Импеданс: 8 Ом
  • Байланыш технологиясы: XLR, TRS, RCA
  • Монтаж түрү: Жерге орнотулуу, устунга орнотуу
  • Өзгөчө өзгөчөлүгү: Lightweight, Durable
  • Башкаруу ыкмасы: Touch (referring to push-buttons and rotary knobs)
  • Кубат булагы: Электр зымдары
  • Элемент Салмагы: 48 фунт
  • Продукциянын өлчөмдөрү: 15 x 14 x 24 дюйм (L x W x H)
  • Түсү: Кара
  • Өндүрүүчү: Electro-Voice

10. Кепилдик жана колдоо

The Electro-Voice ELX112P Powered Loudspeaker comes with a Limited Warranty. Please refer to the warranty card included with your product or visit the official Electro-Voice webтолук шарттары жана шарттары үчүн сайт.

For technical support, service, or warranty inquiries, please contact Electro-Voice customer service through their official website or authorized service centers. Ensure you have your product model number (ELX112P) and purchase information available when contacting support.

Өндүрүүчү: Electro-Voice

Webсайт: www.electrovoice.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.