PROLINE CM86-5/16 Carbide Tipped Rotary Masonry Drill Instruction Manual

1. Киришүү

This manual provides essential information for the safe and effective use of your PROLINE CM86-5/16 Carbide Tipped Rotary Masonry Drill. Please read these instructions carefully before use and retain them for future reference.

1.1 Продукт бүттүview

The PROLINE CM86 series carbide tipped rotary masonry drills are engineered for drilling into coarse materials that produce a powder or gravel-like debris. These drills are suitable for use with standard rotary power tools and are optimized for light to medium hard building materials.

1.2 Негизги өзгөчөлүктөрү

• Carbide Tipped: For enhanced durability and cutting performance.
• Deep Flute: Design for efficient debris removal.
• German Made: Craftsmanship ensuring quality.
• Узун узундук: For deeper drilling applications.
• Ар тараптуу: Compatible with standard rotary power tools.

Image: A single PROLINE CM86-5/16 carbide tipped rotary masonry drill bit, showcasing its deep flute design and carbide tip.

2. Коопсуздук маалыматы

Always prioritize safety when using power tools and drill bits. Failure to follow safety guidelines can result in serious injury.

• Көздү коргоону кийүү: Учуучу таштандылардан коргоо үчүн ар дайым коргоочу көз айнек же көз айнекти тагыныңыз.
• Угуу коргоочу аппаратты кийүү: Use ear protection, especially during prolonged drilling operations.
• Кол кап кийүү: Protect hands from sharp edges and vibrations.
• Коопсуз жумуш бөлүгү: Ensure the material being drilled is firmly clamped or secured to prevent movement.
• Туура ылдамдыкты колдонуу: Operate your rotary power tool at the appropriate speed for the material and drill bit size.
• Ашыкча ысып кетүүдөн сактаныңыз: Allow the drill bit to cool periodically, especially during continuous use, to prevent damage to the bit and workpiece.
• Битти текшерүү: Before each use, inspect the drill bit for any signs of damage, wear, or dullness. Do not use damaged bits.
• Кубатты өчүрүү: Always disconnect the power tool from its power source before changing drill bits or performing maintenance.
• Жумуш аймагын таза кармоо: Ensure your work area is well-lit and free from obstructions.

3. Орнотуу

3.1 Installing the Drill Bit

1. Электр куралы өчүк экенин текшериңиз: Verify that your rotary power tool is unplugged or its battery is removed.
2. Ачык Чак: Rotate the chuck counter-clockwise to open the jaws wide enough to accept the drill bit shank.
3. Бит киргизүү: Insert the shank of the PROLINE CM86-5/16 drill bit into the chuck. Ensure it is inserted as far as possible without the flutes touching the chuck jaws.
4. Чакты бекемдөө: Rotate the chuck clockwise to securely tighten the jaws around the drill bit shank. For chucks requiring a key, use the key to ensure maximum tightness. A loose bit can be dangerous and cause inaccurate drilling.
5. Коопсуздукту текшерүү: Gently pull on the drill bit to confirm it is firmly seated and will not slip during operation.

4. Иштөө нускамалары

4.1 Drilling Masonry Materials

1. Тийиштүү ылдамдыкты тандаңыз: For masonry drilling, generally use a slower speed setting on your rotary power tool. Consult your power tool's manual for specific recommendations.
2. Бургулоочу жайды белгилөө: Бургулоону каалаган жерди так белгилеңиз.
3. Акырындык менен баштоо: Begin drilling at a slow speed with light pressure to create a pilot indentation and prevent the bit from wandering.
4. Туруктуу басымды колдонуу: Once the bit has engaged the material, increase the speed and apply steady, firm pressure. Avoid excessive force, which can overheat the bit or damage the power tool.
5. Таштандыларды тазалоо: Periodically withdraw the drill bit from the hole to allow debris to clear from the flutes. This is especially important for deep holes.
6. Түз бурчту сактоо: Түз тешик камсыз кылуу үчүн бургулоону бетине перпендикуляр кармаңыз.
7. Муздатуу: For prolonged drilling, especially in hard materials, allow the bit to cool down to prevent premature wear.
8. Бургулоо иштерин бүтүрүү: Once the desired depth is reached, slowly withdraw the drill bit from the hole while the drill is still rotating.

4.2 Сунушталган материалдар

This drill bit is designed for optimal performance in:

• Light to medium hard building materials
• Materials that produce coarse powder or gravel when drilled

Caution: Not recommended for use in materials requiring hammer drill action unless specifically designed for such use by the power tool manufacturer.

5. Техникалык тейлөө жана сактоо

5.1 Тазалоо

After each use, clean the drill bit to remove any dust, debris, or residue. A stiff brush or compressed air can be used. Ensure the bit is dry before storage.

5.2 Текшерүү

Regularly inspect the carbide tip for chipping or excessive wear. Check the flutes for any obstructions or damage. A dull or damaged bit should be replaced to ensure safety and efficiency.

5.3 Сактоо

Store drill bits in a dry environment to prevent rust. Keep them in their original packaging or a dedicated drill bit case to protect the tips and prevent accidental injury. Store out of reach of children.

6. Кыйынчылыктарды

7. Техникалык шарттар

8. Кепилдик жана колдоо

For information regarding warranty coverage or technical support for your PROLINE CM86-5/16 drill bits, please refer to the manufacturer's official website or contact Champion Cutting Tool Corp. directly. Keep your purchase receipt as proof of purchase.

Өндүрүүчү: Champion Cutting Tool Corp.