ORE International 6336F Floating Shade Floor Lamp User Manual

Introduction

This manual provides essential instructions for the safe assembly, operation, and maintenance of your ORE International 6336F Floating Shade Floor Lamp. Сураныч, орнотуудан мурун бул колдонмону кылдат окуп чыгыңыз жана аны келечекте маалымат үчүн сактап коюңуз.

The ORE International 6336F is a modern floor lamp featuring a rectangular white linen shade, a brushed nickel body stand, and an espresso wooden base. It is designed for indoor use and includes an on/off step switch.

Маанилүү коопсуздук нускамалары

• Бардык нускамаларды окуңуз: Before assembling or using this lamp, carefully read and understand all instructions.
• Электр коопсуздугу: Ensure the power supply is disconnected before assembly, installation, or maintenance. Use only the specified bulb type and wattage.
• Үй ичинде гана колдонуу: Бул лamp is designed for indoor use in dry locations. Do not expose to water or moisture.
• Туруктуу жайгаштыруу: l коюңузamp кыйроонун алдын алуу үчүн жалпак, туруктуу бетке.
• шнур коопсуздугу: Do not run the power cord under carpets or in areas where it can be tripped over or damaged. Keep the cord away from heat sources.
• Лампаны иштетүү: Allow bulbs to cool before touching or replacing. Do not exceed the maximum wattage lде көрсөтүлгөнamp.
• Тазалоо: Clean with a soft, dry cloth. Do not use liquid or abrasive cleaners.
• UL тизмеси: Бул продукт коопсуздук стандарттарына шайкештигин көрсөтүп, UL тизмеси болуп саналат.

Бөлүктөр тизмеси

Монтаждоону баштоодон мурун, бардык бөлүктөрдүн бар экенин жана бузулбаганын текшериңиз. Идентификациялоо үчүн төмөндөгү диаграмманы караңыз.

1-сүрөт: ORE International 6336F Floating Shade Floor Lamp. This image displays the fully assembled lamp, featuring a rectangular white linen shade positioned above a slender brushed nickel stand, which is anchored by a solid black wooden base.

1. Base (Wooden)
2. Lower Pole Section (Brushed Nickel)
3. Upper Pole Section (Brushed Nickel)
4. Lamp Head with Socket (Brushed Nickel)
5. Rectangular Linen Shade
6. Shade Support Frame (if separate)
7. Power Cord with Step Switch
8. Hardware (Screws, Washers, Allen Wrench - specific to model)

Монтаждоо көрсөтмөлөрү

Follow these steps carefully to assemble your floor lamp. л жыйноо сунуш кылынатamp чийиктердин алдын алуу үчүн жумшак, таза бетке.

1. Компоненттерди таңгактан чыгаруу: Carefully remove all parts from the packaging. Lay them out and verify against the Parts List.
2. Төмөнкү уюлду негизге бекитүү: Connect the lower pole section (2) to the wooden base (1). Secure it using the provided hardware (screws/washers) and the appropriate tool (e.g., Allen wrench). Ensure the pole is firmly seated and stable.
3. Connect Upper Pole: Screw the upper pole section (3) onto the lower pole section (2). Gently twist until securely tightened. Be careful not to cross-thread.
4. Орнотуу Л.amp башчысы: l тиркеңизamp head with socket (4) to the top of the upper pole section (3). Ensure the electrical wire passes freely through the pole sections and is not pinched.
5. Assemble Shade: If the shade (5) requires assembly, follow the specific instructions provided with the shade components. Typically, this involves attaching the shade fabric to a metal frame.
6. Attach Shade to Lamp башчысы: Carefully place the assembled shade (5) onto the lamp head (4). Secure it using the shade ring or finial, if applicable, by screwing it onto the lamp розетка.
7. Лампаны киргизүү: Screw a suitable light bulb (not included, refer to specifications for type and wattage) into the lamp розетка. Өтө катуу тартпаңыз.
8. Позициясы Лamp: Чогултулган лamp in its desired location, ensuring the power cord is not obstructed or under tension.

Иштөө нускамалары

1. Кубатка туташуу: lampэлектр шнурунун стандарттуу электр розеткасына.
2. Күйгүзүү/өчүрүү: Locate the step switch on the power cord. Press the switch with your foot to turn the lamp ON. Press it again to turn the lamp ӨЧҮРҮҮ.
3. Өчүрүүчү өзгөчөлүгү: Бул лamp is designed to be dimmable. If you wish to utilize this feature, ensure you use a dimmable bulb and connect the lamp to a compatible dimmer switch (not included). The integrated step switch provides simple on/off functionality.

Техникалык тейлөө

• Тазалоо: lamp from the power source before cleaning. Use a soft, dry cloth to wipe the metal and wooden surfaces. For the linen shade, a lint roller or a soft brush can be used to remove dust. Avoid using abrasive cleaners, solvents, or polishes as they may damage the finish.
• Лампаны алмаштыруу: l камсыз кылууamp is unplugged and the bulb has cooled completely before attempting to replace it. Unscrew the old bulb and screw in a new bulb of the correct type and wattage (Спецификацияларды караңыз).
• Үзгүлтүксүз текшерүүлөр: Periodically check the power cord for any signs of damage or fraying. Ensure all connections remain secure.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик жана колдоо

For specific warranty information, please refer to the documentation included with your purchase or contact the retailer where the product was acquired. ORE International products typically come with a limited manufacturer's warranty.

Should you require technical assistance, replacement parts, or have questions not covered in this manual, please contact ORE International customer support. Contact details can usually be found on the manufacturer's official webсайтында же сатып алуу дүмүрчөгүндө.

Сиз да зыярат кылсаңыз болот ORE Store on Amazon кошумча продукт маалымат үчүн.