BONTEC TV Wall Mount Instruction Manual

1. Продукт бүтүп калдыview

The BONTEC TV Wall Mount (Model 118MB) is designed to securely hold 37 to 85-inch LED, LCD, OLED flat and curved screen televisions. It features a low-profile design, holding your TV only 1.5 inches from the wall, and offers a tilting function for optimal viewing angles. This mount supports VESA patterns from 200x100mm up to 600x400mm and can support TVs weighing up to 132 lbs (60 kg).

Image: Complete BONTEC TV Wall Mount kit including wall plate, TV brackets, bubble level, cable ties, and various mounting hardware.

2. Орнотуу жана орнотуу

Careful installation is crucial for the safety and stability of your television. Please follow these steps precisely.

2.1. Пакеттин мазмунун текшериңиз

Before beginning, verify that all parts listed in the packing list are present and undamaged.

Image: Detailed diagram showing all components included in the BONTEC TV Wall Mount package, including wall plates, TV brackets, bubble level, cable ties, and various screws and anchors.

2.2. Дубалдын түрүн жана жайгашкан жерин аныктаңыз

This mount is suitable for wood stud, solid concrete, and brick walls. ЖАЛГЫЗ ГИПСОКОЛЬОНГО ОРНОТПОҢУЗ. Ensure the chosen location can support the weight of the mount and your TV.

Image: Visual representation of compatible wall types: wood studs, concrete wall, and brick wall. A warning indicates not to mount on drywall alone.

2.3. Дубал плитасын дубалга бекитиңиз

1. Locate and mark the desired mounting height and horizontal center on your wall.
2. Use the included bubble level to ensure the wall plate is perfectly horizontal.
3. Drill pilot holes according to your wall type (wood studs, concrete, or brick) and secure the wall plate using the appropriate lag bolts and anchors.

2.4. Сыналгы кронштейндерин сыналгыга бекитиңиз

Identify the VESA mounting holes on the back of your TV. The mount supports VESA patterns from 200x100mm to 600x400mm.

Image: Diagram illustrating the compatible VESA patterns (200x100mm to 600x400mm) for the TV mount, showing how the brackets attach to the back of a television.

1. Select the correct screws, washers, and spacers that fit your TV's mounting holes.
2. Attach the left and right TV brackets to the back of your TV, ensuring they are securely fastened and evenly aligned.

2.5. Телевизорду дубалга илип коюңуз

Carefully lift the TV with the attached brackets and hook the brackets onto the wall plate. The sturdy dual upper hooks and auto-locking steel buckles will secure the TV in place.

Сүрөт: Жакын план view of the TV mount's user-friendly design, highlighting the sturdy dual upper hook, auto-locking steel buckles, and pulling cords for dismounting and locking.

Төмөн профессионалfile design ensures the TV sits only 1.5 inches from the wall for a sleek appearance.

Image: A television mounted on the wall using the BONTEC mount, showcasing its flat-to-wall design and neat appearance in a living room setting. Icons indicate compatibility with 37-85 inch TVs and a maximum capacity of 60kg/132lbs.

3. Иштөө нускамалары

3.1. Айлантуу функциясы

The BONTEC TV Wall Mount allows for a 1-degree upward tilt and an 8-degree downward tilt. This feature helps reduce screen glare and improve viewing comfort, especially when the TV is mounted higher than eye level.

Image: Illustration demonstrating the tilting capabilities of the TV mount, showing a 1-degree upward tilt and an 8-degree downward tilt. It also highlights the 1.5-inch distance from the wall.

To adjust the tilt, loosen the tilt adjustment screws on the side of the TV brackets, set your desired angle, and then tighten the screws to secure the position.

3.2. Dismounting the TV

To dismount the TV, pull the nylon cords located at the bottom of the TV brackets. This will release the automatic locking system, allowing you to safely lift the TV off the wall plate.

Image: Details on the quality materials used, showing rustproof assembly parts, steel-made buckles for securing mounting arms, and quality nylon rope pulling cords for easy dismounting.

4. Техникалык тейлөө

To ensure the longevity and safe operation of your BONTEC TV Wall Mount, periodic maintenance is recommended:

• Тазалоо: Орноткучту аарчуу үчүн жумшак, кургак чүпүрөктү колдонуңуз. Каптамага зыян келтире турган абразивдүү тазалоочу каражаттардан же эриткичтерден алыс болуңуз.
• Байланыштарды текшерүү: Бардык бурамаларды жана болттордун бекем жана бекем экенине ынануу үчүн мезгил-мезгили менен текшерип туруңуз. Убакыттын өтүшү менен титирөө же кыймыл бекиткичтердин бошоп калышына алып келиши мүмкүн.
• эскирүү үчүн текшерүү: Examine the mount for any signs of wear, corrosion, or damage. If any issues are found, contact customer support for assistance.

5. Кыйынчылыктарды

If you encounter any issues with your TV wall mount, please refer to the following common troubleshooting tips:

• Телевизордун деңгээли: Ensure the wall plate was installed perfectly level using the included bubble level. Minor adjustments can sometimes be made by slightly loosening and re-tightening the TV bracket screws.
• Эңкейтүүнүн кыйынчылыгы: Check that the tilt adjustment screws are sufficiently loosened before attempting to change the tilt angle. Ensure no cables are obstructing the movement.
• Тоо бош сезилет: Immediately remove the TV from the mount. Re-check all wall fasteners and TV bracket screws to ensure they are securely tightened. If mounting into wood studs, ensure the lag bolts are fully engaged in the center of the studs. If mounting into concrete/brick, ensure anchors are properly seated.
• Жетишпеген бөлүктөр: Refer to the packing list in Section 2.1. If any parts are missing, contact BONTEC customer support.

If problems persist after attempting these solutions, please contact professional assistance or BONTEC customer support.

6. Техникалык шарттар

7. Кепилдик жана колдоо

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official BONTEC website. You may also contact BONTEC customer service directly for assistance with product inquiries, troubleshooting, or replacement parts.