KOAMTAC 674500

KOAMTAC KDC20/100/200 190mAh Battery User Manual

Модель: 674500

Introduction

This manual provides essential information for the proper use, maintenance, and troubleshooting of your KOAMTAC KDC20/100/200 190mAh replacement battery. This battery is designed to provide reliable power for your KDC20, KDC100, and KDC200 series devices. For optimal performance, it is recommended to replace your KDC battery annually.

Коопсуздук маалыматы

Please read and understand all safety precautions before using the battery. Improper handling can lead to damage, injury, or fire.

KDC20/100/200 190mAh battery installed in a device, showing a caution label for laser radiation.

Image: The KDC20/100/200 190mAh battery installed in a compatible device. Note the caution label on the device indicating "LASER RADIATION - DO NOT STARE INTO BEAM" for devices with laser components. This image highlights the proper placement of the battery within the device's battery compartment.

Орнотуу: Батареяны орнотуу

Follow these steps to properly install the 190mAh battery into your KDC20, KDC100, or KDC200 series device.

  1. Ensure your KDC device is powered off before beginning the installation.
  2. Locate the battery compartment on the back of your KDC device.
  3. If an old battery is present, carefully remove it.
  4. Align the new 190mAh battery with the battery compartment, ensuring the connector pins on the battery match the receptacle in the device.
  5. Gently push the battery into place until it is securely seated and the connector is fully engaged.
  6. Close the battery compartment cover, if applicable, ensuring it latches securely.
KOAMTAC KDC20/100/200 190mAh replacement battery with connector.

Image: The KOAMTAC KDC20/100/200 190mAh replacement battery. This image shows the compact blue battery pack with its small white connector and red and black wires, ready for installation into a compatible KDC device.

Operating: Charging and Usage

Once installed, the battery will power your KDC device. Follow these guidelines for charging and optimal usage.

Батареяны заряддоо

Батареяны колдонуу

Техникалык тейлөө

Proper maintenance can extend the lifespan of your battery.

Проблемаларды чечүү

If you encounter issues with your battery, consider the following common solutions:

КөйгөйМүмкүн себепЧечим
Device does not power on after battery installation.Battery not properly seated or not charged.Ensure battery is fully inserted. Charge the device for at least 30 minutes.
Батарея бат эле түгөнөт.Aging battery, heavy device usage, or environmental factors.Reduce device usage intensity. Consider replacing the battery if it's old (recommended annually). Ensure device firmware is up to date.
Батарея заряддалбай жатат.Faulty charger/cable, dirty contacts, or damaged battery.Try a different charger/cable. Clean battery and device contacts. If problem persists, the battery may need replacement.

If troubleshooting steps do not resolve the issue, please contact KOAMTAC customer support.

Техникалык шарттар

ӨзгөчөлүкДеталь
Модель номери674500
Батарея сыйымдуулугу190 мАч
Тtage3.7 вольт
Батарея клеткасынын курамыЖабылган коргошун кислотасы
Продукциянын өлчөмдөрү2 x 2 x 1 дюйм
Элемент Салмагы8 унция
ӨндүрүүчүKOAMTAC

Кепилдик маалымат

KOAMTAC provides a limited warranty for its products. For specific warranty terms and conditions applicable to the KDC20/100/200 190mAh battery, please refer to the official KOAMTAC webсайтка же түздөн-түз кардарларды колдоо менен байланышыңыз. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.

Кардарларды колдоо

For further assistance, technical support, or inquiries regarding your KOAMTAC KDC20/100/200 190mAh battery, please contact KOAMTAC customer support through their official channels.

Тектеш документтер - 674500

Preview Interbuild жыгач панелдерин орнотуу, кам көрүү жана техникалык тейлөө боюнча колдонмо
Comprehensive guide from Interbuild on how to properly store, install, care for, and maintain wood panels, butcher block countertops, desktops, and vanity tops. Includes essential information on acclimatization, oiling, expansion gaps, and repair.
Preview KOAMTAC KDC80 Mini Guide: Bluetooth штрих-код сканерин орнотуу жана иштетүү
KOAMTAC KDC80 Bluetooth штрих-код сканерин орнотуу жана иштетүү боюнча кыска нускама, күйгүзүү/өчүрүү, Bluetooth жупташтыруу, негизги иштөө жана техникалык мүнөздөмөлөрдү камтыйт.
Preview KOAMTAC SKX7Pro SmartSled Mini Guide
A concise guide to the KOAMTAC SKX7Pro SmartSled, covering its features, basic operation, connectivity options, software integration, and available accessories. Learn how to power on/off, connect via USB, and utilize KTSync SKX and KOAMTACON software.
Preview KOAMTAC KDC200 Ыкчам колдонмо: Орнотуу жана колдонуу
KOAMTAC KDC200 Bluetooth штрих-код сканерин орнотуу жана колдонуу боюнча кыска нускама, продуктту киргизүү, Bluetooth жупташтыруу, колдонуу режимдери (HID Keyboard, Android/iOS үчүн KTSync) жана техникалык мүнөздөмөлөрдү камтыйт.
Preview KOAMTAC KDC UHF Tag Read/Write Demo Guide
This guide provides detailed instructions for using the KOAMTAC KDC UHF device. Learn how to install the demo application, connect the KDC to smart devices via Bluetooth, read and write UHF tag data, manage tag security (lock/kill), configure UHF settings, and utilize the SDK API. It covers essential operations for efficient RFID tag башкаруу.
Preview KOAMTAC KDC20 Mini Guide: Bluetooth штрих-код сканерин орнотуу жана иштетүү
A concise guide to the KOAMTAC KDC20 Bluetooth barcode scanner, covering setup, powering on/off, basic operation, Bluetooth profiles, pairing, keyboard wedge functionality, KTSync, KOAMTACON, and technical specifications.