Hitron HB-2

Hitron HB-2 Digital Bass Reconstruction Processor

Модел: HB-2

Introduction

The Hitron HB-2 is a state-of-the-art digital bass reconstruction processor designed to enhance the low-frequency response of your car audio system. It restores and enhances bass frequencies that are often lost during the recording or compression process, providing a richer and more dynamic audio experience. This unit features a convenient dash-mount remote control for on-the-fly adjustments.

Коопсуздук маалыматы

  • Орнотууну баштоодон мурун ар дайым унаанын аккумуляторун сууруп алыңыз.
  • Professional installation is highly recommended to ensure proper wiring and functionality.
  • Агрегатты нымдуулукка же экстремалдык температурага дуушар кылбаңыз.
  • Кыска туташуулардын алдын алуу үчүн бардык зымдарды туташтыруу бекем жана тийиштүү түрдө изоляциялангандыгын текшериңиз.
  • Mount the unit in a location that does not obstruct the driver's view же автотранспорттун иштешине тоскоолдук кылуу.

Пакеттин мазмуну

Сураныч, пакетте төмөнкү нерселерди текшериңиз:

  • Hitron HB-2 Digital Bass Reconstruction Processor Unit
  • Dash-Mount Remote Control
  • Алыстан башкаруу кабели
  • Power and Signal Wiring Harness

Орнотуу жана орнотуу

Mounting the HB-2 Unit

Choose a secure, dry location for mounting the HB-2 unit, such as under a seat or behind the dashboard. Ensure adequate ventilation around the unit. Use screws to firmly attach the unit to a flat surface.

Hitron HB-2 Digital Bass Reconstruction Processor main unit

Сүрөт: The main Hitron HB-2 unit, showing input/output connections and control knobs.

Зымдарды туташтыруу

  1. Кубат туташуу: Connect the +12V wire to a constant +12V power source, the GND wire to a solid chassis ground, and the REM (remote) wire to your head unit's remote turn-on output.
  2. Аудио киргизүү: Connect your head unit's RCA outputs to the HB-2's balanced RCA inputs.
  3. Аудио чыгаруу: Connect the HB-2's RCA outputs to your ampкөтөргүчтүн RCA киргизүүлөрү.
  4. Алыстан башкаруу: Connect the dash-mount remote control cable to the dedicated port on the HB-2 unit.
Hitron HB-2 Dash-Mount Remote Control and wiring

Сүрөт: The dash-mount remote control with its connecting cable, used for adjusting bass levels.

Иштөө нускамалары

Controls on the HB-2 Unit

  • МАКСИМАЛДУУ БАС БАШКАРУУСУ: Adjusts the overall intensity of the bass reconstruction. Start with a lower setting and increase gradually.
  • FREQ CONTROL: Selects the center frequency for the bass reconstruction. This allows you to target specific bass frequencies for enhancement.
  • WIDE/NARROW Switch: Determines the Q-factor or bandwidth of the bass reconstruction. 'Wide' affects a broader range of frequencies around the center frequency, while 'Narrow' focuses on a tighter range.

Dash-Mount Remote Control

The remote control allows you to adjust the bass output level from your listening position. Rotate the knob to increase or decrease the bass intensity. The illuminated display provides visual feedback.

Техникалык тейлөө

  • Аппаратты жумшак, кургак чүпүрөк менен сүртүп, таза кармаңыз. Катуу химиялык заттарды же абразивдүү тазалоочу каражаттарды колдонбоңуз.
  • Бардык туташуулардын бекем экенине ынаныңыз. Зымдардын эскирүү же бузулуу белгилерин мезгил-мезгили менен текшерип туруңуз.
  • Avoid blocking the ventilation openings on the unit to prevent overheating.

Проблемаларды чечүү

  • Кубат жок: Check the +12V, Ground, and Remote connections. Ensure the remote turn-on signal from the head unit is active. Check for blown fuses in the power line.
  • Басс чыгаруу жок: Verify all RCA input and output connections. Ensure the HB-2 unit is powered on. Adjust the 'MAX BASS CONTROL' and 'FREQ CONTROL' settings. Check the remote control connection.
  • Бурмаланган үн: Reduce the 'MAX BASS CONTROL' setting. Ensure the input signal from the head unit is not overdriven. Check ampкөтөрүүчү пайда орнотуулары.
  • Алыстан башкаруу жооп бербейт: Check the cable connection between the remote and the HB-2 unit.

Техникалык шарттар

Frequency Response10 Гц ~ 100 КГц
Input Noise Rejection60 дБ (тең салмактуу)
Максималдуу чыгаруу деңгээли13.5 V
Жалпы гармоникалык бурмалоо (THD)0.03%
Электр камсыздооPWM High Head Room
Басс башкарууПараметрдик басс башкаруу
Subsonic чыпкасыPFM Subsonic чыпкасы
Продукт Салмагы1.36 кг

Кепилдик жана колдоо

For warranty information, please refer to the documentation provided with your purchase. For technical assistance or support, please contact your authorized Hitron dealer or the point of purchase.

© 2023 Хитрон. Бардык укуктар корголгон.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.