Audio-Technica AT-LP60 Fully Automatic Belt-Drive Stereo Turntable

Introduction

The Audio-Technica AT-LP60 is a fully automatic belt-drive stereo turntable designed for playing 33-1/3 and 45 RPM records. It features a built-in switchable phono pre-amplifier, allowing direct connection to various audio systems and powered speakers. The turntable is equipped with an integral Audio-Technica Dual Magnet phono cartridge with a replaceable stylus.

Негизги өзгөчөлүктөрү:

• Fully automatic operation for 33-1/3 and 45 RPM records.
• Built-in switchable phono pre-amplifier with RCA output cables.
• Integral Audio-Technica Dual Magnet phono cartridge with replaceable diamond stylus.
• Anti-resonance die-cast aluminum platter to minimize vibration.
• Damped lift/cueing mechanism with front-panel control.
• Removable dust cover for protection.

Пакеттин мазмуну

• AT-LP60 Айлануучу бирдиги
• Чаң капкагы
• Айдоо куру менен табак
• Slip Mat
• 45 RPM адаптери
• RCA аудио кабели
• Кубаттуу адаптер

Орнотуу нускамалары

1. Пакеттен чыгаруу: Бардык компоненттерди таңгактан кылдаттык менен алып салыңыз. Келечектеги ташуу же сактоо үчүн таңгактарды сактаңыз.
2. Табакты орнотуу: Place the platter onto the turntable spindle. Ensure it sits correctly.
3. Кур орнотуу: Locate the drive belt around the inner rim of the platter and stretch it over the motor pulley. Ensure the belt is flat and not twisted.
4. Slip Mat Placement: Place the felt slip mat on top of the platter.
5. Чаң капкагын бекитүү: Attach the hinged dust cover to the back of the turntable.
6. Аудио туташуусу: Connect the RCA audio cables from the turntable to your audio system (receiver, amplifier, or powered speakers). If your audio system has a dedicated "PHONO" input, connect directly to it. If not, ensure the turntable's built-in pre-amplifier is switched ON (located on the rear panel) and connect to a standard "LINE" input.
7. Кубат туташуу: Connect the power adapter to the turntable and then to a wall outlet.

Image: Audio-Technica AT-LP60BK Turntable with dust cover open, showing a record on the platter. This image illustrates the turntable ready for use, with the dust cover raised and a record placed on the platter.

Иштөө нускамалары

1. Күйгүзүү: Ensure the turntable is connected to power and your audio system is on.
2. Рекорд: Carefully place a vinyl record on the platter, centering it on the spindle. For 7-inch records, use the included 45 RPM adapter if needed.
3. Жаздыруу өлчөмүн тандаңыз: Use the "SIZE" selector switch (usually 12" or 7") to match the size of your record.
4. Ылдамдыкты тандоо: Use the "SPEED" selector switch (33 or 45 RPM) to match the playback speed of your record.
5. Ойнотууну баштоо (Автоматтык түрдө): басыңыз START button. The tonearm will automatically move to the beginning of the record and lower the stylus.
6. Ойнотууну токтотуу (автоматтык түрдө): басыңыз ТОКТОТ баскычы. Тонер кармагыч автоматтык түрдө көтөрүлүп, ордуна кайтып келет жана пластина айланууну токтотот.
7. Manual Cueing: To manually place the stylus, use the ТОНААРМ КӨТӨРҮҮ lever to raise the tonearm. Position the tonearm over the desired track, then lower the lever to gently drop the stylus onto the record.

Техникалык тейлөө

• Чаң капкагы: Clean the dust cover gently with a soft, dry cloth. Avoid abrasive cleaners.
• Стилуска кам көрүү: Regularly clean the stylus using a soft brush designed for stylus cleaning, brushing from back to front. Replace the stylus when sound quality degrades or after approximately 300-500 hours of use.
• Айланма табактын корпусу: Wipe the turntable body with a soft, dry cloth. Do not use harsh chemicals or solvents.
• Белди алмаштыруу: The drive belt may need replacement after extended use. Refer to the full manual for specific instructions on belt replacement.

Проблемаларды чечүү

• Кубат жок: Ensure the power adapter is securely connected to both the turntable and a working electrical outlet.
• Үн жок же төмөн үн:
  • Check all audio cable connections between the turntable and your audio system.
  • Verify the PHONO/LINE switch on the turntable's rear panel is set correctly for your audio system's input.
  • Ensure your audio system's input selector is set to the correct input.
  • Check the volume level on your audio system.
• Skipping or Distorted Sound:
  • Жазууну кылдаттык менен тазалаңыз.
  • Check the stylus for dirt or damage; clean or replace if necessary.
  • Ensure the turntable is placed on a stable, level surface.
• Platter Not Spinning:
  • Check if the drive belt is properly seated around the platter and motor pulley.
  • Ensure the power is connected and the turntable is switched on.

Техникалык шарттар

Кепилдик жана колдоо

The Audio-Technica AT-LP60 turntable comes with a 1 жылдык кепилдик сатып алынган күндөн тартып. Кепилдик дооматтары үчүн сатып алганыңыздын далилин сактап коюңуз.

For technical support, troubleshooting assistance, or warranty service, please contact Audio-Technica customer support through their official webсайт же продукт таңгагында көрсөтүлгөн байланыш маалыматы.

You can also visit the official Audio-Technica website for FAQs, additional resources, and product registration.