OSD Audio IWS8

OSD Audio IWS8 8-inch In-Wall Subwoofer Instruction Manual

Model: IWS8 | Brand: OSD Audio

1. Киришүү

The OSD Audio IWS8 is an 8-inch in-wall passive subwoofer designed to integrate seamlessly into your home audio system. This unit is engineered to deliver enhanced low-frequency sound, complementing your existing speakers for a richer audio experience. Its discreet design features a paintable grille, allowing it to blend with your room's aesthetics. As a passive subwoofer, it requires an external ampиштетүү үчүн көтөргүч.

Please read this manual thoroughly before installation and use to ensure proper setup and optimal performance.

2. Пакеттин мазмуну

Пакетте бардык компоненттер бар экенин текшериңиз:

  • OSD Audio IWS8 8-inch In-Wall Subwoofer
  • Dog-ear mount system (pre-installed)
  • Integrated rear dust cover (pre-installed)
  • Paintable grille

3. Негизги өзгөчөлүктөрү

  • Кубат менен иштөө: 150 Watts maximum output.
  • Айдоочу: 8-inch polypropylene subwoofer with butyl rubber surround for durability and performance.
  • Дизайн: Төмөн профессионалfile in-wall design for discreet integration.
  • Орнотуу: Easy-install dog-ear bracket system for secure mounting to drywall.
  • Коргоо: Integrated rear dust shield to protect components and improve sound quality.
  • Эстетика: Paintable frame and grille to match room decor.
  • Шайкештик: Passive design requires an external subwoofer amplifier (e.g., OSD Audio SMP200).

4. Орнотуу жана орнотуу

Proper installation is crucial for optimal performance and safety. If you are unsure about any steps, consult a qualified installer.

4.1 Орнотууну пландаштыруу

  • Жайгашкан жери: Choose a wall location free of studs, electrical wires, plumbing, or other obstructions. Use a stud finder to locate studs.
  • Зымдар: Plan your speaker wire routing from the subwoofer amplifier to the subwoofer location. Ensure you use appropriate gauge speaker wire for the distance.

4.2 Керектүү куралдар

  • Арык тапкыч
  • Өлчөө лентасы
  • Карандаш
  • Drywall saw or utility knife
  • Зымдарды сыйрып алуучулар
  • Бурагыч (Phillips баш)
  • Деңгээл

4.3 Cutting the Wall Opening

  1. Carefully measure and mark the desired location on the wall. The cutout dimensions for the IWS8 are approximately 10.5 inches (H) x 10.5 inches (W).
  2. Use a level to ensure your markings are straight.
  3. Using a drywall saw or utility knife, carefully cut along the marked lines.
OSD Audio IWS8 In-Wall Subwoofer with dimensions

Image: The OSD Audio IWS8 in-wall subwoofer shown with its dimensions, indicating a height of 12 inches, width of 11.5 inches, and depth of 6 inches.

4.4 Wiring the Subwoofer

  1. Pull the speaker wire through the wall opening.
  2. Strip approximately 1/2 inch of insulation from the ends of the speaker wire.
  3. Connect the positive (+) terminal of the speaker wire to the red (+) terminal on the subwoofer.
  4. Connect the negative (-) terminal of the speaker wire to the black (-) terminal on the subwoofer. Ensure a secure connection.
Арткы view of OSD Audio IWS8 subwoofer showing wiring terminals

Image: A rear-side view of the OSD Audio IWS8 in-wall subwoofer, highlighting the speaker wire terminals and the dog-ear mounting clamps.

4.5 Сабвуферди орнотуу

  1. Carefully insert the subwoofer into the wall opening.
  2. Tighten the screws on the front baffle of the subwoofer. This will activate the dog-ear clamps, rotating them outwards to grip the drywall securely.
  3. Do not overtighten the screws, as this can damage the drywall or the subwoofer frame. Tighten until the subwoofer is snug and flush with the wall surface.
Жогорку view of OSD Audio IWS8 subwoofer showing dog-ear clamps

Сүрөт: жогорудан ылдыйга view of the OSD Audio IWS8 in-wall subwoofer, illustrating the dog-ear mounting clamps in their extended position, ready to secure the unit to a wall.

4.6 Торду орнотуу

  1. Once the subwoofer is securely mounted, align the paintable grille with the subwoofer frame.
  2. The grille is designed to fit snugly. Gently press it into place until it is flush with the wall.
  3. If desired, the grille can be painted to match your wall color before installation. Ensure paint does not clog the perforations.
жарылды view of OSD Audio IWS8 in-wall subwoofer and grille

Сүрөт: жарылган view of the OSD Audio IWS8 in-wall subwoofer, showing the main speaker unit and its separate paintable grille, ready for installation.

5. Операция

5.1 Ampөмүрлүү

The IWS8 is a passive subwoofer and requires an external subwoofer amplifier. OSD Audio recommends using an amplifier such as the SMP200, a 200-watt Class D subwoofer amplifier with an advanced crossover circuit. Connect the speaker output terminals of your subwoofer amplifier to the input terminals of the IWS8, ensuring correct polarity (+ to + and - to -).

5.2 Initial Power-Up and Adjustment

  1. Кубатыңызды күйгүзүүдөн мурун бардык туташуулардын коопсуз экенин текшериңиз ampкөтөргүч жана аудио булагы.
  2. Start with the volume level on your subwoofer amplifier set to a low position.
  3. Play audio through your system. Gradually increase the amplifier's volume until the desired bass level is achieved.
  4. Adjust the crossover frequency and phase settings on your subwoofer amplifier to blend the subwoofer's output smoothly with your main speakers. Refer to your amplifier's manual for specific instructions on these adjustments.

6. Техникалык тейлөө

The OSD Audio IWS8 subwoofer requires minimal maintenance.

  • Тазалоо: Periodically wipe the grille and frame with a soft, dry cloth to remove dust. Do not use harsh chemicals or abrasive cleaners.
  • Текшерүү: Occasionally check the mounting screws to ensure they remain tight and the subwoofer is securely seated in the wall.

7. Кыйынчылыктарды

If you encounter issues with your IWS8 subwoofer, refer to the following common troubleshooting steps:

КөйгөйМүмкүн себепЧечим
Сабвуферден үн чыкпайт
  • Сабвуфер amplifier is off or unplugged.
  • Туура эмес зымдарды туташтыруу.
  • Amplifier input source not selected or muted.
  • Динамиктин зымы бузулган.
  • камсыз кылуу amplifier is powered on and connected.
  • Verify all speaker wire connections are correct and secure.
  • Текшерүү amplifier settings for correct input and unmute.
  • Test with a known good speaker wire.
Бурмаланган же түшүнүксүз үн
  • Ampкөтөргүчтүн көлөмү өтө жогору.
  • Туура эмес amplifier settings (e.g., crossover).
  • Бошоң динамик зым байланыштары.
  • Кыскартуу ampкөтөрүүчү көлөмү.
  • Adjust crossover frequency and phase on the ampөмүрлүү.
  • Бардык динамик зымдарынын туташууларын текшерип, коопсуздандырыңыз.
Алсыз же жетишсиз басс
  • Ampкөтөргүчтүн көлөмү өтө төмөн.
  • Туура эмес кроссовер жыштыгы жөндөлдү.
  • Phase setting mismatch.
  • Сабвуфердин жайгашуусу.
  • Көбөйтүү ampкөтөрүүчү көлөмү.
  • Adjust crossover frequency on the amplifier to a lower setting.
  • Experiment with the phase control on the ampөмүрлүү.
  • Consider repositioning if possible, or adjusting room acoustics.
Vibration from the wall or grille
  • Subwoofer not securely mounted.
  • Grille not properly seated.
  • Wall cavity resonance.
  • Ensure dog-ear clamps are fully tightened and the subwoofer is flush.
  • Press the grille firmly into place.
  • Consider adding acoustic dampening material within the wall cavity if accessible.

8. Техникалык шарттар

СпецификацияНарк
БрендOSD аудио
Модель номериIWS8
Динамик түрүДубалдагы сабвуфер
Вуфердин диаметри8 дюйм
Динамиктин максималдуу чыгаруу күчү150 Ватт
Frequency Response40 Hz (Lower limit, actual range depends on amplifier and room)
Импеданс8 Ом
Монтаж түрүIn-Wall
Коргоочу материалПолипропилен
Элементтин өлчөмдөрү (D x W x Y)11.5"D x 12"W x 6"H (Жалпы)
Cutout Dimensions (Approx.)10.5" x 10.5"
Байланыш технологиясыКөмөкчү (Зымдуу)
Камтылган медиаSubwoofer, dog ear mount system, integrated rear dust cover

9. Кепилдик маалыматы

The OSD Audio IWS8 In-Wall Subwoofer is covered by a 10 жылдык кепилдик from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the OSD Audio webсайт.

10. Кардарларды колдоо кызматы

For further assistance, technical support, or warranty inquiries, please contact OSD Audio customer service. You can find contact information and additional resources by visiting the official OSD Audio webсайт:

www.osdaudio.com

© 2024 OSD Audio. Бардык укуктар корголгон.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.