1. Продукт бүтүп калдыview
The BLACK+DECKER EIH183 Impact Driver Head is an accessory designed to convert your compatible EVO 183 power tool body into an impact driver. This head is specifically engineered for tasks requiring high torque, such as tightening long screws in applications like wood deck construction. It provides efficient and powerful screw driving capabilities, enhancing the versatility of your existing BLACK+DECKER EVO system.
This impact driver head delivers a maximum torque of 140 Newton Meters (N·m) and features a no-load rotational speed ranging from 0 to 3100 revolutions per minute (min-1). The impact mechanism provides 0 to 4000 impacts per minute (min-1), ensuring effective fastening. It is constructed from glass-filled nylon for durability.
Figure 1: The BLACK+DECKER EIH183 Impact Driver Head in use, attached to a compatible power tool body for screw driving.
2. Жалпы коопсуздук маалыматы
Always observe basic safety precautions when using power tools and accessories to reduce the risk of fire, electric shock, and personal injury. Keep this instruction manual for future reference.
- Бардык нускамаларды окуңуз: Familiarize yourself with the operation and limitations of the tool and the specific hazards associated with this accessory.
- Көздү коргоону тагыныңыз: Always wear appropriate eye protection that complies with applicable standards.
- Угууну коргоочу кийимдерди кийиңиз: Электр шаймандарынан чыккан ызы-чуунун узакка созулушу угууну начарлатышы мүмкүн.
- Коопсуз жумуш бөлүгү: Ар дайым clamp же башка жол менен иштөө учурунда кыймылга жол бербөө үчүн даярдалган бөлүгүн бекитиңиз.
- Жумуш аймагын таза кармаңыз: Башаламан жерлер кырсыкка чакырат.
- Кокусунан баштоодон сактаныңыз: Ensure the power tool is switched off before attaching or detaching the impact driver head.
- Use correct accessory: Only use bits and accessories designed for impact driving and compatible with this head.
- Туура бутту жана тең салмактуулукту сактаңыз: аша чаап алба.
- Электр кубатын өчүрүү: Always disconnect the power tool from its power source (remove battery pack) before making any adjustments, changing accessories, or storing the tool.
3. Орнотуу жана орнотуу
3.1 Attaching the Impact Driver Head
- Ensure your BLACK+DECKER EVO 183 power tool body is switched off and the battery pack is removed.
- Align the impact driver head with the main body of the EVO 183 tool.
- Push the head firmly onto the body until it clicks securely into place. Ensure it is fully seated and does not wobble.
3.2 Биттерди салуу жана алып салуу
The EIH183 Impact Driver Head uses standard 1/4-inch hex shank bits.
- To insert a bit: Pull the collar of the chuck forward, insert the hex shank of the bit fully into the chuck, and then release the collar. Tug on the bit to ensure it is securely locked.
- To remove a bit: Pull the collar of the chuck forward, and the bit will release.
Figure 2: The EIH183 Impact Driver Head showing the bit insertion mechanism.
4. Иштөө нускамалары
Once the impact driver head is securely attached and a bit is inserted, you can begin operation.
- Жумушчу бөлүктү даярдоо: Ensure the material to be fastened is stable and properly supported. Mark the drilling or driving location.
- Тиешелүү битти тандаңыз: Choose a bit that matches the screw head type and size.
- Куралды жайгаштырыңыз: Hold the power tool firmly with both hands. Place the tip of the bit onto the screw head.
- Start Driving: Press the trigger on the EVO 183 power tool body. The impact mechanism will engage as resistance increases, providing high torque for efficient screw driving.
- Башкаруу ылдамдыгы: The speed is typically controlled by the pressure applied to the trigger. Start slowly to ensure the bit engages properly with the screw head, then increase speed as needed.
- Ашыкча кысууну болтурбоо: Release the trigger once the screw is fully seated to prevent damage to the screw head or workpiece.
Figure 3: The EIH183 Impact Driver Head being used to fasten components on a metal frame, demonstrating its application in various tasks.
5. Техникалык тейлөө
Regular maintenance ensures optimal performance and extends the lifespan of your impact driver head.
- Тазалоо: After each use, wipe the impact driver head with a clean, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no dust or debris accumulates in the chuck mechanism.
- Сактагыч: Store the impact driver head in a dry, secure location, away from direct sunlight and extreme temperatures. Keep it out of reach of children.
- Текшерүү: Periodically inspect the head for any signs of wear, damage, or loose parts. If any damage is found, discontinue use and contact customer support.
6. Кыйынчылыктарды
This section addresses common issues you might encounter with the EIH183 Impact Driver Head.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Бит коопсуз кармабайт. | Chuck collar not fully released; bit not fully inserted; incorrect bit type. | Ensure bit is fully inserted and collar is released. Use only 1/4-inch hex shank bits. |
| Impact mechanism not engaging. | Insufficient resistance; tool body issue. | The impact mechanism engages under load. If no load, it will act as a regular driver. Check the EVO 183 power tool body for proper function. |
| Төмөндөтүлгөн аткаруу. | Worn bit; low battery on tool body; debris in chuck. | Replace worn bits. Recharge or replace the battery pack on the EVO 183 body. Clean the chuck mechanism. |
7. Техникалык шарттар
The following are the key technical specifications for the BLACK+DECKER EIH183 Impact Driver Head:
| Өзгөчөлүк | Спецификация |
|---|---|
| Модель номери | EIH183 |
| Максималдуу момент | 140 N·m (Newton Meters) |
| Жүк жок айлануу ылдамдыгы | 0 - 3100 мүн-1 (RPM) |
| Number of Impacts | 0 - 4000 мүн-1 |
| Tightening Capacity (Screws) | 4.2 × 125 мм |
| Tightening Capacity (Ordinary Bolt) | M12 |
| Материал | Glass filled nylon |
| Келип чыккан өлкө | Кытай |
4-сүрөт: Өлчөмдүү view of the EIH183 Impact Driver Head.
8. Кепилдик жана колдоо
For specific warranty information, please refer to the documentation provided with your original BLACK+DECKER EVO 183 power tool body or visit the official BLACK+DECKER website. This impact driver head is an accessory and its warranty may be covered under the main tool's warranty or as a separate accessory.
For technical support, spare parts, or service inquiries, please contact BLACK+DECKER customer service. You can often find contact details on the official brand website or within the main power tool's instruction manual.
BLACK+DECKER Official Store: Amazon сайтындагы BLACK+DECKER дүкөнүнө баш багыңыз
