Tenergy 2200mAh Sub C NiCd Battery User Manual

1. Киришүү

This manual provides essential information for the safe and effective use of your Tenergy 2200mAh Sub C NiCd rechargeable batteries. Please read this manual thoroughly before using the batteries to ensure optimal performance and longevity.

Image 1.1: Tenergy Sub C NiCd batteries are suitable for various power tools and devices.

2. Коопсуздук маалыматы

Failure to follow these safety instructions may result in fire, electric shock, injury, or damage to the batteries or device.

• Батареяларды отко таштабаңыз. Алар жарылып же агып кетиши мүмкүн.
• Do not mix new batteries with used batteries, or batteries of different types (e.g., NiCd with NiMH).
• Батарея терминалдарын кыска туташтырбаңыз.
• Do not disassemble, puncture, or modify the batteries.
• Keep batteries away from water, heat, and direct sunlight.
• Store batteries out of reach of children and pets.
• If a battery leaks, avoid contact with the fluid. If contact occurs, wash immediately with soap and water. Seek medical attention if irritation persists.
• Use only chargers specifically designed for NiCd batteries.

3. Продукт бүтүп калдыview

The Tenergy 2200mAh Sub C NiCd batteries are designed for high-drain applications, offering reliable and continuous power. These batteries feature a flat top design with pre-soldered tabs, making them ideal for custom battery pack assembly.

Image 3.1: Tenergy 2200mAh Sub C NiCd Battery 15-Pack.

Негизги өзгөчөлүктөрү:

• Жогорку кубаттуулугу: 2200mAh for extended runtime.
• Тtage: 1.2V per cell.
• Кайра заряддалуучу: Can be recharged up to 500 times, reducing waste and cost.
• Flat Top with Tabs: Equipped with pre-soldered tabs for easy integration into custom battery packs.
• NiCd Chemistry: Provides consistent power output for high-drain devices.

Image 3.2: The 2200mAh capacity ensures continuous energy for your devices.

4. Тиркемелер

These Tenergy Sub C NiCd batteries are suitable for a wide range of high-drain electronic devices and custom battery pack applications, including:

• Power Tools (e.g., cordless drills, electric screwdrivers)
• Авариялык жарыктандыруу
• Portable Devices (e.g., handheld vacuums, remote-controlled toys)
• DIY Battery Packs requiring Sub C cells with tabs

Image 4.1: These batteries are ideal for high-drain devices.

5. Орнотуу жана орнотуу

The Tenergy Sub C NiCd batteries come with pre-soldered tabs, simplifying the process of creating custom battery packs or replacing cells in existing packs.

Creating Custom Battery Packs:

1. Конфигурацияңызды пландаштырыңыз: Determine the required voltage and capacity for your device. This will dictate the number of cells and their series/parallel arrangement.
2. Байланыштарды даярдоо: The pre-soldered tabs allow for easy soldering to connect cells in series or parallel. Ensure proper polarity (+ to - for series, + to + and - to - for parallel).
3. ширетүү: Use appropriate soldering techniques to connect the tabs. Minimize heat exposure to the battery cell during soldering.
4. Изоляция: After soldering, insulate all connections with heat shrink tubing or electrical tape to prevent short circuits.
5. Сыноо: Before final assembly, test the voltage and continuity of your custom pack to ensure correct wiring.

Image 5.1: Pre-soldered tabs facilitate easy assembly of custom battery packs.

6. Иштөө нускамалары

Once installed in your device or custom pack, operate the batteries according to the device manufacturer's instructions. For optimal performance, follow these general guidelines:

• Баштапкы төлөм: Fully charge new batteries before their first use.
• Заряддоо цикли: For NiCd batteries, it is often recommended to fully discharge the battery before recharging to prevent the "memory effect."
• Температура: Operate batteries within their recommended temperature range (typically 0°C to 45°C for charging, -20°C to 60°C for discharge).
• Ашыкча чыгымды болтурбоо: Do not allow batteries to discharge completely below their minimum voltage, as this can damage the cells.

7. Техникалык тейлөө

Proper maintenance extends the lifespan and performance of your Tenergy NiCd batteries.

• Кадимки заряддоо: Recharge batteries promptly after use, especially if they have been heavily discharged.
• Full Cycles: Periodically perform a full discharge and recharge cycle to mitigate the NiCd memory effect and maintain capacity.
• Тазалоо: Keep battery terminals clean and free of corrosion. Use a dry cloth to wipe them if necessary.
• Сактагыч: For long-term storage, charge batteries to about 40-50% capacity and store them in a cool, dry place. Avoid extreme temperatures.
• Жоюу: NiCd batteries contain cadmium, a toxic heavy metal. Do not dispose of them in household waste. Recycle them at designated battery recycling centers.

8. Кыйынчылыктарды

If you encounter issues with your Tenergy NiCd batteries, consider the following common solutions:

9. Техникалык шарттар

Detailed technical specifications for the Tenergy 2200mAh Sub C NiCd Battery:

• Батарея түрү: Никель-кадмий (NiCd)
• Клетка өлчөмү: Sub C
• Номиналдуу томtage: 1.2 вольт
• Сыйымдуулугу: 2200 миллионampere Саат (мАч)
• Кайра колдонууга жарамдуулугу: Rechargeable (up to 500 cycles)
• Конфигурация: Flat Top with Tabs
• Элементтин өлчөмдөрү: Болжол менен 0.91 x 0.91 x 1.69 дюйм (23 мм x 23 мм x 43 мм)
• Элемент Салмагы: Approximately 1.8 Ounces (0.11 Pounds) per cell
• Модель номери: 6543873008
• UPC: 844949016292

Image 9.1: Approximate dimensions of the Tenergy Sub C NiCd battery with tabs.

10. Кепилдик жана колдоо

For warranty information, technical support, or further inquiries regarding your Tenergy products, please visit the official Tenergy webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз.

You can also visit the Tenergy Store on Amazon for product details and support resources:

Visit the Tenergy Store