XTAR MP1S Intelligent USB Battery Charger User Manual

1. Киришүү

The XTAR MP1S Intelligent USB Battery Charger is designed for charging various 3.7V Li-ion batteries, including 14650, 17670, 18650, 18700, and with the use of spacers, also 10440, 14500, 15270, 16340, and 18350 types. It features an advanced TC.CC.CV (Trickle Current, Constant Current, Constant Voltage) charging algorithm that continuously monitors battery status for safe and automatic charging. The charger is equipped with a protection circuit and intelligent temperature monitoring to ensure optimal performance and safety.

2. Коопсуздук чаралары

Please read and understand all safety warnings before using the charger.

• Үй ичинде гана колдонуу: Агрегатты суудан жана нымдан алыс кармаңыз.
• Батарея шайкештиги: Only charge 3.7V Li-ion batteries. Charging other battery types may cause damage or injury.
• Демонтаждоо жок: Disassembly or modification of the charger is strictly prohibited.
• Кыска туташуулардан качыңыз: Short circuits are strictly prohibited and can cause severe damage to the charger and battery.
• Иштөө температурасы: Ensure the charger is used within the recommended operating temperature range of 0~40℃.

3. Продукциянын өзгөчөлүктөрү

• Intelligent Charging Algorithm: Utilizes TC.CC.CV charging system for efficient and safe charging.
• Automatic Monitoring: Monitors battery status continuously throughout the charging process.
• Low Current Standby: Automatically enters a low current status (below 4uA) when the input voltage is removed, minimizing battery discharge.
• Зарядды тейлөө: Continuously monitors the battery after charging is complete and restarts charging if the battery's voltage drops to 4.0V or below, maintaining a full charge.
• Температураны көзөмөлдөө: The charging management chip monitors its own temperature. If the detected temperature is too high, the charge current will automatically lower to protect the charger.
• Коргоо схемасы: Incorporates a robust protection circuit for enhanced safety.

4. Баштоо (Орнотуу)

Follow these steps to set up your XTAR MP1S charger:

1. Туташуу кубаты: Connect the USB cable to the charger's USB input port and then to a 5V USB power source (e.g., computer USB port, USB wall adapter, or car charger).
2. Батарея салыңыз: Carefully insert the 3.7V Li-ion battery into the charging slot, ensuring the correct polarity (+ and - ends) aligns with the markings on the charger. The positive (+) end of the battery should align with the positive contact on the charger, and the negative (-) end with the negative spring contact.
3. Заряддоо көрсөткүчү: The charger will automatically begin charging. Refer to the operating section for details on charging status.

Сүрөт 1: Алдыңкы view of the XTAR MP1S Charger, showing the battery slot and USB input.

5. Операция

The XTAR MP1S charger operates automatically once a compatible battery is inserted and power is connected.

• Заряддоо процесси: Заряддоочу түзүлүш көп функциялууtage TC.CC.CV charging method. It starts with a trickle current, then moves to constant current, and finally constant voltage to safely and efficiently charge your battery.
• Батарея шайкештиги: This charger is designed for 3.7V Li-ion batteries. It supports 14650, 17670, 18650, 18700, and with the use of spacers, also 10440, 14500, 15270, 16340, 18350 battery sizes.
• Автоматтык түрдө толуктоо: To ensure your battery remains fully charged, the charger will automatically restart charging if the battery voltage drops below 4.0V after a full charge.

Figure 2: Bottom and side views of the XTAR MP1S Charger, showing ventilation and USB port.

6. Техникалык тейлөө

Туура тейлөө сиздин заряддагычыңыздын узак иштөөсүн жана оптималдуу иштешин камсыз кылат:

• Кургак кармоо: Always keep the charger in a dry environment. Avoid exposure to water or high humidity.
• Таза байланыштар: Periodically clean the charging contacts on the charger and your batteries with a dry, soft cloth to ensure good electrical connection.
• Сактагыч: Колдонулбаганда, заряддагычты түз күн нурунан жана өтө температурадан алыс салкын, кургак жерде сактаңыз.
• Таасирден качуу: Do not drop or subject the charger to heavy impact.

7. Кыйынчылыктарды

If you encounter issues with your XTAR MP1S charger, consider the following:

• Заряддагыч күйбөй жатат:
  • USB кабели заряддагычка да, кубат булагына да бекем туташып турганын текшериңиз.
  • Verify that the USB power source (e.g., wall adapter, computer port) is functional and providing 5V output.
• Батарея заряддалбай жатат:
  • Check that the battery is a 3.7V Li-ion type and is compatible with the charger (refer to compatible battery list).
  • Батарея туура полярдуулук менен салынганын текшериңиз.
  • Inspect the battery and charger contacts for dirt or damage. Clean if necessary.
  • Check for any signs of short circuit on the battery or within the charger slot.
• Charging is Slow or Stops Prematurely:
  • The charger's internal temperature control may reduce charging current if it detects overheating. Allow the charger to cool down in a well-ventilated area.
  • Ensure the USB power source can provide sufficient current (500mA recommended).

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information and technical support, please contact XTAR customer service or visit the official XTAR webсайт. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.

You can visit the official XTAR store on Amazon for more information: XTAR расмий дүкөнү