1. Киришүү
The Fluke 115 True-RMS Compact Digital Multimeter is designed for field service technicians. It provides accurate True-RMS AC voltage and current readings, along with the ability to measure resistance, continuity, frequency, capacitance, and diode test. Its compact design and bright white LED backlight make it suitable for various electrical and electronic testing applications, even in dimly lit environments.
2. Коопсуздук маалыматы
Always follow basic safety precautions when using this product to avoid potential personal injury or damage to the meter or equipment under test. This multimeter is rated CAT III 600 V, Pollution Degree 2, ensuring safe operation within specified limits.
- Эгерде эсептегич бузулган же туура эмес иштеп жатса, аны колдонбоңуз.
- Баалангандан ашык колдонбоңузtagд, эсептегичте белгиленгендей, терминалдардын ортосунда же кандайдыр бир терминал менен жердин ортосунда.
- Том менен этият болуңузtag30 В өзгөрмө токтун RMS, 42 В чоку же 60 В туруктуу ток жогору. Буларtagшок коркунучун жаратат.
- Өлчөөлөрүңүз үчүн ар дайым туура терминалдарды, функцияны жана диапазонду колдонуңуз.
- Батареянын заряды аз экенин көрсөткөн индикатор пайда болору менен так көрсөткүчтөрдү камсыз кылуу үчүн аны алмаштырыңыз.
3. Продукт бүтүп калдыview
Figure 3.1: Fluke 115 Multimeter with included test leads and soft carrying case. This image shows the complete package, highlighting the meter's compact size and essential accessories for field use.
Сүрөт 3.2: Алдыңкы view of the Fluke 115 Multimeter, showcasing its large digital display, rotary function switch, and input jacks. The display shows '0.000' and 'AC' indicating it's ready for an AC voltage өлчөө.
3.3-сүрөт: Арткы view of the Fluke 115 Multimeter, showing the battery compartment cover and a label detailing power-up options. These options include disabling the beeper, auto power off, and auto backlight off by pressing specific buttons while turning the meter on.
The Fluke 115 features a large, 6000-count digital display with a 33-segment bar graph for quick visual indication of changing signals. It offers a wide range of measurement capabilities, including True-RMS for accurate readings on non-linear loads. The compact and ergonomic design ensures ease of use for one-handed operation.
4. Орнотуу
4.1 Батареяны орнотуу
The Fluke 115 Multimeter uses one 9-volt alkaline battery (NEDA 1604A / IEC 6LR61). To install or replace the battery:
- Ensure the meter is turned OFF and test leads are disconnected.
- Эсептегичтин арткы бетиндеги батарея бөлүмүн табыңыз (3.3-сүрөттү караңыз).
- Батареянын капкагын бекиткен буроону бошотуш үчүн бурагычты колдонуңуз.
- Remove the cover and replace the old battery with a new 9-volt alkaline battery, observing polarity.
- Батарейканын капкагын ордуна коюп, бурамасын бекемдеңиз.
4.2 Сыноо өткөргүчтөрүн туташтыруу
Always connect the black test lead to the COM input jack. Connect the red test lead to the appropriate input jack for the desired measurement:
- VΩHz том үчүнtage, resistance, continuity, diode, capacitance, and frequency measurements.
- 10A FUSED for current measurements up to 10A.
4.3 Power-Up Options
The Fluke 115 offers several power-up options that can be activated by pressing and holding a specific button while turning the rotary switch from OFF to any function:
- HOLD баскычы: Disables the beeper.
- MIN MAX button: Disables Auto Power Off.
- RANGE баскычы: Disables Auto Backlight Off.
5. Иштөө нускамалары
5.1 Негизги операция
To operate the multimeter:
- Turn the rotary switch to the desired function.
- Сыноо өткөргүчтөрүн сыналган схемага туташтырыңыз.
- Дисплейдеги өлчөөнү окуңуз.
5.2 Өлчөө функциялары
The Fluke 115 offers the following measurement capabilities:
- DC millivolts, DC volts
- AC millivolts True RMS, AC Volts True RMS (45 Hz to 500 Hz)
- Үзгүлтүксүздүк
- Ом
- Диод сыноо
- Capacitance, Lo-Z Capacitance
- AC Amps True RMS (45 Hz to 500 Hz), DC Amps
- Гц (V же A киргизүү)
5.3 MIN/MAX/AVG Recording
басыңыз MIN MAX button to activate the recording mode. The meter will capture the minimum, maximum, and average readings over time. Pressing the button repeatedly cycles through MIN, MAX, AVG, and current readings. This feature is useful for capturing intermittent fluctuations in signals.
5.4 Дисплейдин арткы жарыгы
Press the backlight button (light bulb icon) to turn the display backlight on or off. The backlight provides clear visibility in low-light conditions. By default, the backlight will automatically turn off after a period of inactivity to conserve battery life, unless disabled via the power-up option.
6. Техникалык тейлөө
6.1 Тазалоо
Ишти жарнама менен сүртүңүзamp cloth and mild detergent. Do not use abrasives or solvents. Clean the terminals periodically with a cotton swab and detergent solution.
6.2 Батареяны алмаштыруу
Refer to Section 4.1 for detailed instructions on battery replacement. Replace the 9-volt alkaline battery when the low battery indicator appears on the display to ensure continued accurate operation.
6.3 Сактагычты алмаштыруу
The 10A input jack is protected by an 11 A, 1000 V FAST Fuse. If the meter fails to measure current, the fuse may need replacement. Fuse replacement should only be performed by qualified personnel. Use only specified replacement fuses to maintain safety ratings.
7. Кыйынчылыктарды
If the multimeter is not functioning as expected, review төмөнкү жалпы маселелер жана чечимдер:
- Дисплей жок же күңүрт дисплей: Check battery charge. Replace the 9-volt battery if low.
- Туура эмес окуулар: Ensure test leads are properly connected to the correct input jacks and the rotary switch is set to the appropriate function and range. Check for damaged test leads.
- Токту өлчөө жок: The fuse for the 10A input may be blown. Refer to Section 6.3 for fuse replacement.
- Meter turns off unexpectedly: Auto Power Off feature might be active. Disable it by holding the MIN MAX button while turning the meter on.
- Backlight turns off too quickly: Auto Backlight Off feature might be active. Disable it by holding the RANGE button while turning the meter on.
For persistent issues, contact Fluke customer support.
8. Техникалык шарттар
8.1 Жалпы спецификациялар
| Өзгөчөлүк | Спецификация |
|---|---|
| Дисплей | Digital: 6000 counts, 4 updates/second; Bar Graph: 33 segments, 32 updates/second |
| Максималдуу томtage кандайдыр бир терминал менен жердин ортосунда | 600V |
| Overvoltage Коргоо | 6 kV peak per IEC 61010-1 600 V CAT III, Pollution Degree 2 |
| А киргизүү үчүн сактагыч | 11 A, 1000 V FAST Fuse |
| Иштөө температурасы | -10 °Cден +50 °Cге чейин |
| Сактоо температурасы | -40 °Cден +60 °Cге чейин |
| Салыштырмалуу нымдуулук | Non-condensing when <10 °C; ≤90% from 10 °C to 30 °C; ≤75% between 30 °C and 40 °C; Operating humidity, 40 MΩ range: ≤80% between 10 °C and 30 °C; ≤70% between 30 °C and 40 °C |
| Батарея түрү | 9-volt alkaline, NEDA 1604A / IEC 6LR61 |
| Батареянын иштөө мөөнөтү | 400 hours typical, without backlight |
| Өлчөмдөрү (H x W x D) | 167 x 84 x 46 мм |
| Салмагы | 550 г |
8.2 Accuracy Specifications
Figure 8.1: Detailed accuracy specifications for the Fluke 115 Multimeter, including measurement ranges, resolutions, and accuracy percentages for DC voltage, AC томtage, continuity, ohms, diode test, capacitance, and current measurements.
9. Кепилдик жана колдоо
The Fluke 115 Multimeter comes with a 3-year manufacturer's warranty from the date of purchase, covering defects in materials and workmanship. For warranty claims or technical support, please contact Fluke customer service through their official webсайтына же ыйгарым укуктуу тейлөө борборлоруна кайрылыңыз. Кепилдикти жарактуулук мөөнөтү үчүн сатып алгандыгыңызды тастыктаган документти сактап коюңуз.