Amped Wireless BTSA1 Long Range Bluetooth Speaker Adapter Instruction Manual

1. Киришүү

The Amped Wireless BTSA1 Long Range Bluetooth Speaker Adapter allows you to wirelessly stream audio from any Bluetooth-enabled device to your speaker system. This manual provides instructions for setting up, operating, and maintaining your device.

Сүрөт 1.1: Алдыңкы view -ныкы Amped Wireless BTSA1 adapter with its antenna.

Негизги өзгөчөлүктөрү

• Wirelessly stream audio to your speaker system from any Bluetooth-enabled device.
• Experience superior sound quality without audio interruptions.
• Simple plug-and-play setup.
• Compatible with any Bluetooth device and speakers with 3.5mm or RCA inputs.

2. Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• Amped Wireless BTSA1 Long Range Bluetooth Speaker Adapter
• Кубаттуу адаптер
• 3.5mm (male) to RCA (male) cable
• Ыкчам орнотуу көрсөтмөсү

3. Орнотуу

Follow these steps to connect your Amped Wireless BTSA1 adapter to your speaker system and pair your device.

3.1 Адаптерди туташтыруу

1. Туташуу кубаты: Plug the provided power adapter into the "PWR" port on the back of the BTSA1 adapter and then into a wall outlet.
2. Динамик системасына туташуу:
   • For RCA input: Use the included 3.5mm to RCA cable. Connect the RCA ends to the "AUDIO OUT" ports (red and white) on the back of the adapter and the 3.5mm end to your speaker system's auxiliary input.
   • For 3.5mm input: Use a standard 3.5mm audio cable (not included). Connect one end to the "LINE OUT" port on the back of the adapter and the other end to your speaker system's 3.5mm auxiliary input.

Image 3.1: Rear panel connections of the BTSA1 adapter, including power, audio outputs, and antenna port.

Сүрөт 3.2: Каптал view illustrating the antenna connection and rear ports.

3.2 Bluetooth түзмөгүн жупташтыруу

1. Ensure the BTSA1 adapter is powered on. The "Connect" button on the front will illuminate.
2. On your Bluetooth-enabled device (smartphone, tablet, laptop), navigate to its Bluetooth settings.
3. Bluetooth'ду иштетиңиз жана жеткиликтүү түзмөктөрдү издеңиз.
4. тандоо "Amped Wireless BTSA1" from the list of found devices.
5. Once connected, the indicator light on the adapter will change to confirm successful pairing.

Сүрөт 3.3: Алдыңкы view of the BTSA1 adapter, highlighting the 'Connect' button.

4. Адаптерди иштетүү

After successful pairing, you can begin streaming audio.

1. Ensure your speaker system is turned on and set to the correct input source (AUX, RCA, etc.) where the BTSA1 is connected.
2. Play audio from your Bluetooth-enabled device. The sound will now be transmitted wirelessly to your speaker system.
3. Adjust volume using your Bluetooth device or your speaker system's controls.

Эскертүү: Only one device can be actively connected to the BTSA1 adapter at a time. To connect a different device, disconnect the currently paired device from its Bluetooth settings, then initiate pairing from the new device.

5. Техникалык тейлөө

The Amped Wireless BTSA1 adapter requires minimal maintenance.

• Аппаратты кургак чөйрөдө, тике күн нурунан жана экстремалдык температурадан алыс кармаңыз.
• Сыртын жумшак, кургак чүпүрөк менен тазалаңыз. Суюк тазалоочу каражаттарды же аэрозольдорду колдонбоңуз.
• Ашыкча ысып кетүүнүн алдын алуу үчүн аппараттын айланасында туура желдетүүнү камсыз кылыңыз.

6. Кыйынчылыктарды

Эгер сиз менен көйгөйлөр пайда болсо Amped Wireless BTSA1 adapter, refer to the following common solutions:

7. Техникалык шарттар

8. Продукт видеосу бүттүview

9. Кепилдик жана колдоо

Кепилдик жөнүндө маалымат жана техникалык колдоо алуу үчүн, сураныч, расмий Amped Wireless website or the contact details provided in the Quick Install Guide included with your product.