BLACK+DECKER Chainsaw Chain User Manual

Продукт бүттүview

This manual provides essential information for the installation, operation, and maintenance of the BLACK+DECKER OEM Replacement RC800 Chainsaw Chain. This chain is designed for 8-inch chainsaws and is compatible with various BLACK+DECKER models, including CCS818, LCS120, LPP120, and NPP2018 series.

Image: Two BLACK+DECKER RC800 Chainsaw Chains. These are replacement chains, typically sold in a 2-pack, designed for 8-inch chainsaw bars. Each chain features sharp cutting teeth and drive links for efficient wood cutting.

Коопсуздук маалыматы

Always prioritize safety when handling chainsaw chains and operating chainsaws. Failure to follow safety instructions can result in serious injury.

• Чынжырлуу араа боюнча колдонмону окуп чыгыңыз: Before installing or using this chain, thoroughly read and understand the safety and operating instructions provided with your specific chainsaw model.
• Жеке коргонуу каражаттары (ЖКК): Always wear appropriate PPE, including safety glasses, hearing protection, gloves, and sturdy footwear, when working with chainsaws.
• Чынжырдын курчтугу: A sharp chain is safer and more efficient. Regularly inspect and sharpen the chain as needed.
• Туура чыңалуу: Ensure the chain is correctly tensioned before each use to prevent derailment and kickback.
• Электр энергиясын өчүрүү: Always disconnect the power source (remove battery or unplug) from the chainsaw before performing any maintenance, installation, or adjustment on the chain.

Орнотуу жана орнотуу

Follow these steps to properly install the replacement chainsaw chain on your compatible BLACK+DECKER 8-inch chainsaw.

1. Чынжырлуу арааны даярдоо: Ensure the chainsaw is turned off and the battery is removed (for cordless models) or unplugged (for corded models). Place the chainsaw on a stable, flat surface.
2. Бардын капкагын алып салуу: Loosen and remove the bar cover nuts, then carefully remove the bar cover.
3. Remove Old Chain and Bar: Remove the old chain from the guide bar and the drive sprocket. Then, remove the guide bar itself.
4. Таза компоненттери: Clean any sawdust or debris from the guide bar groove, sprocket, and surrounding area.
5. Жаңы чынжырды орнотуу: Place the new chain around the drive sprocket, ensuring the cutting edges are facing the correct direction (usually forward on the top of the bar).
6. Position Guide Bar: Fit the chain into the groove of the guide bar. Slide the guide bar onto the chainsaw studs, ensuring the chain drive links engage with the sprocket.
7. Чынжыр чыңалуусун тууралоо: While holding the guide bar slightly up, adjust the chain tensioning screw until the chain fits snugly against the bottom of the guide bar. The chain should be able to be pulled around the bar by hand without binding, but not sag excessively. A good test is to pull the chain away from the bar; the drive links should remain in the bar groove.
8. Reinstall Bar Cover: Replace the bar cover and tighten the bar nuts securely. Recheck chain tension after tightening, as it can change.
9. Майлоо: Ensure the chainsaw's automatic oiler is functioning or manually lubricate the chain and bar if required by your chainsaw model.

Иштөө көрсөтмөлөрү

This section provides general guidelines for operating a chainsaw with the installed chain. Refer to your chainsaw's specific manual for detailed operating instructions.

• Ишке чейинки текшерүү: Before each use, inspect the chain for sharpness, proper tension, and any damage. Check oil levels.
• Chainsaw баштоо: Follow your chainsaw manufacturer's instructions for safe starting procedures.
• Кесүү техникасы: Maintain a firm grip with both hands. Keep your body balanced and avoid overreaching. Always be aware of kickback potential.
• чынжырды майлоо: Ensure the chain is continuously lubricated during operation. Insufficient lubrication will cause premature wear to both the chain and guide bar.
• Чынжырлуу арааны токтотуу: Follow manufacturer's instructions for safely stopping the chainsaw.

Техникалык тейлөө

Regular maintenance extends the life of your chainsaw chain and ensures safe operation.

• чынжыр курчутуу: Sharpen the chain regularly using a round file of the correct diameter for your chain's cutters. Maintain consistent angles. A sharp chain cuts efficiently and reduces strain on the chainsaw.
• чынжыр чыңалуу: Check chain tension frequently, especially during the first hour of use with a new chain, and before each subsequent use. Adjust as needed.
• Тазалоо: After each use, clean sawdust, sap, and debris from the chain, guide bar groove, and sprocket area.
• Гид тилкесин тейлөө: Бир калыпта эскирүүнү камсыз кылуу үчүн багыттоочу тилкени мезгил-мезгили менен которуңуз. Гид тилкесинин оюгун жана май тешиктерин тазалаңыз.
• Сактагыч: When storing the chainsaw for extended periods, clean and lightly oil the chain and guide bar to prevent rust. Store in a dry place.

Проблемаларды чечүү

Common issues and their solutions related to the chainsaw chain.

Техникалык шарттар

Key specifications for the BLACK+DECKER OEM Replacement RC800 Chainsaw Chain.

• Бренд: BLACK+DECKER
• Модель номери: 90616714
• Бөлүмдүн номери: 623382-00
• чынжыр узундугу: 8 дюйм
• Drive шилтемесинин саны: 52
• Quantity per package: 2 чынжыр
• Compatible Chainsaw Models: CCS818 (Type 1, 2), CCS818B (Type 1, 2), CCS818X (Type 1, 2), LCS120 (Type 1), LCS120B (Type 1), LPP120 (Type 1), LPP120B (Type 1), NPP2018 (Type 1, 2), NPP2018B (Type 1)
• Элемент Салмагы: 6.1 унция
• Продукциянын өлчөмдөрү: 2.5 x 5 x 5.5 дюйм (упаковка)
• Келип чыккан өлкө: АКШ
• Материал: Металл
• UPC: 704660041969

Кепилдик жана колдоо

For warranty information or technical support regarding your BLACK+DECKER product, please refer to the documentation included with your original chainsaw purchase or visit the official BLACK+DECKER webсайт.

BLACK+DECKER расмий дүкөнү: Amazon сайтындагы BLACK+DECKER дүкөнүнө баш багыңыз