Introduction
This instruction manual provides essential information for the proper installation, use, and maintenance of the Geberit 390.555.14.1 Silent Gtea Braga 87 Degrees pipe fitting. Please read this manual thoroughly before proceeding with any installation or maintenance to ensure safe and efficient operation.
Продукт бүттүview
The Geberit 390.555.14.1 is an 87-degree pipe fitting designed for drainage systems. It is constructed from durable plastic, ensuring longevity and reliable performance in plumbing applications.
Image: Geberit 390.555.14.1 Silent Gtea Braga 87 Degrees pipe fitting. This image shows the gray plastic pipe fitting, which is an 87-degree branch for drainage systems.
Негизги өзгөчөлүктөрү:
- Component Design: Engineered for optimal flow and connection within drainage systems.
- Socket Fitting: Designed for secure and leak-proof connections with compatible pipes.
- Пластикалык курулуш: Made from high-quality plastic suitable for various drainage applications.
Орнотуу жана орнотуу
Proper installation is crucial for the long-term performance of the Geberit 390.555.14.1 pipe fitting. Always consult local plumbing codes and regulations before beginning installation.
- Даярдоо: Ensure all connecting pipes are clean, free of burrs, and cut squarely. Measure and mark the installation points accurately.
- Dry Fit: Perform a dry fit of the fitting and connecting pipes to confirm proper alignment and fit before applying any adhesive or sealant.
- Application of Sealant/Adhesive: Apply appropriate plumbing adhesive or sealant to the pipe ends and the fitting's sockets as per the adhesive manufacturer's instructions. Ensure even coverage.
- Байланыш: Firmly insert the pipes into the fitting's sockets, twisting slightly to ensure even distribution of the adhesive/sealant. Hold in place for the recommended curing time.
- Айыктыруу: Allow the adhesive/sealant to cure completely before applying water pressure to the system. Refer to the adhesive manufacturer's guidelines for curing times.
- Сыноо: After curing, slowly introduce water into the system and carefully inspect all connections for leaks. Address any leaks immediately.
For specific dimensional requirements, refer to the 'Specifications' section below, which includes a detailed diagram and table.
Техникалык тейлөө
The Geberit 390.555.14.1 pipe fitting requires minimal maintenance. Regular inspection can help prevent potential issues.
- Мезгилдүү текшерүү: Periodically check visible connections for any signs of leaks, cracks, or damage.
- Тазалоо: If the fitting is accessible and shows signs of external dirt or debris, clean it with a mild soap solution and a soft cloth. Avoid harsh chemicals that could damage the plastic.
- Blockage Prevention: Ensure that the drainage system is used appropriately to prevent blockages that could stress the fitting.
Проблемаларды чечүү
This section addresses common issues that may arise with pipe fittings.
Issue: Leaks at Connection Points
- Мүмкүн болгон себеп 1: Insufficient adhesive/sealant application during installation.
- Чечим 1: Disassemble the connection (if possible), clean thoroughly, and reapply adhesive/sealant according to manufacturer instructions.
- Мүмкүн болгон себеп 2: Improper pipe preparation (e.g., burrs, uneven cuts).
- Чечим 2: Ensure pipe ends are clean, smooth, and cut squarely before re-connecting.
- Мүмкүн болгон себеп 3: Damage to the fitting or pipe.
- Чечим 3: Inspect the fitting and pipes for cracks or damage. Replace any damaged components.
Issue: Restricted Flow/Blockage
- Мүмкүн болгон себеп: Accumulation of debris within the drainage system.
- Чечим: Use appropriate drain cleaning methods. Avoid harsh chemical drain cleaners that may damage plastic pipes and fittings. Consult a professional plumber if blockages persist.
Техникалык шарттар
Detailed specifications for the Geberit 390.555.14.1 Silent Gtea Braga 87 Degrees pipe fitting:
| Атрибут | Нарк |
|---|---|
| Өндүрүүчү | Geberit |
| Бөлүмдүн номери | 390.555.14.1 |
| Элемент Салмагы | 1.21 фунт |
| Продукциянын өлчөмдөрү | 11.81 x 7.87 x 15.75 дюйм |
| Элемент моделинин номери | 390.555.14.1 |
| Түс | Боз |
| Элементтин пакетинин саны | 1 |
| Даана саны | 1 |
| Өлчөө системасы | Метрик |
| Батареялар камтылганбы? | Жок |
| Батареялар керекпи? | Жок |
| Дата биринчи жеткиликтүү | 4-январь, 2014-жыл |
Dimensional Diagram and Table
The following diagram illustrates the key dimensions of the Geberit Silent Gtea Braga fitting, followed by a table detailing specific measurements for different configurations. These dimensions are critical for proper planning and installation.
A technical diagram typically accompanies this product, illustrating the fitting with labeled dimensions: 'd' (main pipe diameter), 'd1' (branch pipe diameter), 'L' (total length), 'Z1', 'Z2', and 'Z3' (specific offset and length measurements). This diagram is crucial for understanding the physical layout and connection points of the fitting.
| d | d1 | L | Z1 | Z2 | Z3 | Art. (Part Number) |
|---|---|---|---|---|---|---|
| 90 | 90 | 17.7 | 6.7 | 7 | 4.9 | 390.454.14.1 |
| 110 | 90 | 18.6 | 6.8 | 8.1 | 5 | 390.554.14.1 |
| 110 | 110 | 21.2 | 8.2 | 7.7 | 6.1 | 390.555.14.1 |
Note: The model covered by this manual is 390.555.14.1, corresponding to the last row in the table.
Кепилдик жана колдоо
Specific warranty details for the Geberit 390.555.14.1 Silent Gtea Braga 87 Degrees pipe fitting are typically provided at the point of purchase or can be obtained directly from the manufacturer, Geberit. Please retain your proof of purchase for warranty claims.
For technical support, installation queries, or further assistance, please contact Geberit customer service or consult their official website. Always refer to the latest product documentation available from the manufacturer.
Өндүрүүчү: Geberit
Webсайт: www.geberit.com (This is a generic link, please refer to the official Geberit webсиздин аймак үчүн сайт)