1. Киришүү
Сатып алганыңыз үчүн рахматasing the Intex Krystal Clear Filter Pump Model 604. This pump is designed to provide efficient filtration for your swimming pool, ensuring clean and clear water. It is suitable for Intex 8ft, 10ft, and 12ft pools, including easy-set and family-sized models. This manual provides essential information for the safe installation, operation, and maintenance of your filter pump. Please read it thoroughly before use and retain it for future reference.
Figure 1: Intex Krystal Clear Filter Pump Model 604. This image shows the complete filter pump unit with its hoses and connections.
2. Коопсуздук маалыматы
ЭСКЕРТҮҮ: Бул көрсөтмөлөрдү аткарбоо олуттуу жаракат же өлүмгө алып келиши мүмкүн.
- Always disconnect the pump from the electrical outlet before servicing or cleaning.
- Электр зымдарын көмүүгө болбойт. Шнурды газон чапкычтар, тосмо кыргычтар же башка жабдуулар зыянга учурабай турган жерге табыңыз.
- Электр тогуна урунуп калуу коркунучун азайтуу үчүн, аппаратты электр кубатына туташтыруу үчүн узартуучу шнурду колдонбоңуз. Туура жайгашкан розетка менен камсыз кылуу.
- Бул шайман физикалык, сезүү же акыл-эс жөндөмү начар же тажрыйбасы жана билими жок адамдар (анын ичинде балдар) үчүн, эгерде алардын коопсуздугуна жооптуу адам тарабынан көзөмөлсүз же шайманды колдонуу боюнча көрсөтмө болбосо, колдонууга арналбайт.
- Балдар шайман менен ойнобошу үчүн аларды көзөмөлгө алуу керек.
- The pump must be positioned on a solid, level surface.
- Ensure all connections are secure and leak-free before operating the pump.
3. Пакеттин мазмуну
Verify that all components listed below are present in your package. If any parts are missing or damaged, please contact Intex customer service.
- 1 x Intex Krystal Clear Filter Pump (Model 604)
- 1 x Type "A" Filter Cartridge
- 2 x 3.20 cm (1.25") ID Hoses
- 2 x Plunger Valves
- 1 x Large Intex Pool Filter and Inlet Assembly
- 1 x Instruction Manual
4. Орнотуу нускамалары
Follow these steps to properly set up your Intex Krystal Clear Filter Pump.
- Насосту жайгаштырыңыз: Place the filter pump on a firm, level surface, at least 2 feet (0.6 meters) away from the pool wall. Ensure the pump is lower than the water level of the pool.
- Install Plunger Valves: Attach the two plunger valves to the pool's inlet and outlet fittings. Ensure they are securely tightened.
- Шлангдарды туташтыруу:
- Connect one 3.20 cm (1.25") ID hose from the lower plunger valve (pool outlet) to the pump's inlet connection (marked "IN" or with an arrow pointing towards the pump).
- Connect the second 3.20 cm (1.25") ID hose from the pump's outlet connection (marked "OUT" or with an arrow pointing away from the pump) to the upper plunger valve (pool inlet).
Note: Ensure all hose clamps are tightened securely to prevent leaks.
- Фильтр картриджди орнотуу: Open the filter housing cover, insert the Type "A" filter cartridge, and then securely close the cover.
- Насосту иштетиңиз:
- Open both plunger valves on the pool.
- Loosen the air release valve on top of the filter housing until water begins to flow out. Close the air release valve once a steady stream of water appears.
- Ensure the pool is filled to the appropriate level.
- Кубатка туташуу: Plug the pump into a grounded 220-240 volt electrical outlet. Do not use extension cords.
Video: Intex Filter Pump Setup Guide (No specific video URL provided in input. This is a placeholder for potential future integration.)
Figure 2: Illustration of hose connections for the filter pump. This diagram would typically show the flow of water from the pool outlet to the pump inlet, and from the pump outlet to the pool inlet, with plunger valves in place.
5. Иштөө нускамалары
Once the pump is set up and primed, you can begin operating it to filter your pool water.
- Насосту иштетүү: Plug the pump into the electrical outlet. The pump will begin to circulate and filter the pool water.
- Иштөө убактысы: Operate the filter pump for approximately 2-4 hours per day, depending on pool size, usage, and water condition. For optimal water clarity, it is recommended to run the pump for longer durations during heavy use or warmer weather.
- Суунун агымын көзөмөлдөө: Periodically check the water flow from the pump's return jet into the pool to ensure proper operation. Reduced flow may indicate a clogged filter cartridge or air in the system.
- Өчүрүү: To turn off the pump, simply unplug it from the electrical outlet. If you need to perform maintenance or stop water flow, close the plunger valves on the pool's inlet and outlet.
6. Техникалык тейлөө
Regular maintenance is crucial for the longevity and efficient performance of your filter pump.
6.1 Фильтр картридждерин тазалоо жана алмаштыруу
- Жыштыгы: The Type "A" filter cartridge should be cleaned every few days and replaced every two weeks, or more frequently depending on pool usage and water conditions.
- Тазалоо:
- Насосту кубат булагынан ажыратыңыз.
- Close both plunger valves to prevent water from flowing out of the pool.
- Unscrew the filter housing cover.
- Чыпкалуу картриджди алып салыңыз.
- Rinse the cartridge thoroughly with a garden hose to remove debris. Do not use a high-pressure washer as it can damage the filter material.
- Эгерде картридж чайкагандан кийин кир же түсү өзгөрүп калса, аны алмаштыруу керек.
- Reinsert the clean or new cartridge and secure the filter housing cover.
- Open the plunger valves and prime the pump as described in the setup section.
- Reconnect the pump to the power source.
6.2 Кышка даярдык
Before freezing temperatures arrive, the filter pump must be drained and stored.
- Насосту кубат булагынан ажыратыңыз.
- Disconnect all hoses from the pump and pool.
- Чыпкалуу картриджди алып салыңыз.
- Drain all water from the pump housing.
- Насосту жана түтүктөрдү кургак, үшүк тийбеген жерде сактаңыз.
7. Кыйынчылыктарды
Жалпы маселелер жана аларды чечүү үчүн төмөнкү таблицага кайрылыңыз.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Насос иштебей жатат | No power; tripped circuit breaker; motor malfunction. | Check power connection; reset circuit breaker; contact customer service if motor is faulty. |
| Суунун аз агымы | Clogged filter cartridge; air in the system; closed plunger valves; kinked hoses. | Clean or replace filter; re-prime pump; open plunger valves; straighten hoses. |
| Байланыштардан суу агып жатат | бош шланг clamps; damaged O-rings or gaskets; improper hose connection. | Шланг clamps; inspect and replace O-rings/gaskets; ensure hoses are correctly attached. |
| Насос адаттан тыш үн чыгарат | Air in the system; debris in impeller; motor bearing issue. | Re-prime pump; disconnect power and check impeller for debris; contact customer service for motor issues. |
8. Техникалык шарттар
- Бренд: Intex
- Модел: 604 (Manufacturer Part Number: 2623727)
- Агым ылдамдыгы: 2,006 Liters per hour (530 Gallons per hour)
- Compatible Pools: Intex 8ft, 10ft, 12ft Easy Set and Frame Pools
- Фильтр картридж түрү: "А"
- Кубат булагы: Электр зымдары
- Тtage: 220-240V
- Материал: Пластик
- Түсү: Ак, Боз
- Элемент Салмагы: 3.23 килограмм
- UPC: 787162623727
- ASIN: B00JRB3NO8
9. Кепилдик жана колдоо
Intex өнүмдөрү эң жогорку сапаттагы материалдардан жана устачылык менен жасалат. Бардык Intex өнүмдөрү заводдон чыгардан мурун текшерилип, кемчиликтери жок экени аныкталган.
For warranty information, please refer to the warranty card included with your product or visit the official Intex website. For technical support, replacement parts, or further assistance, please contact Intex customer service.
Расмий Intex Webсайт: www.intexcorp.com