AMC SUB 2 Active Subwoofer Instruction Manual

Introduction

The AMC SUB 2 is an active subwoofer designed for very low-frequency sound reproduction. It features a 200W amplifier and a high-quality aramid glass composite woofer mounted at the front. It delivers strong bass output with a sensitivity of 90 dB. Its compact size and powerful bass make it suitable for any audio setup requiring deep low frequencies. This manual provides essential information for the safe and efficient use of your AMC SUB 2 subwoofer.

Коопсуздук маалыматы

Сураныч, бул аппаратты иштетүүдөн мурун бардык коопсуздук нускамаларын окуп, түшүнүңүз. Бул колдонмону келечектеги маалымат үчүн сактаңыз.

• Электр шок коркунучу: Do not open the subwoofer enclosure. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
• Кубат булагы: Connect the unit only to an AC power outlet that matches the voltage and frequency specified on the rear panel (230V, 50Hz/60Hz).
• Нымдуулук жана жылуулук: Do not expose this appliance to rain, moisture, dripping, or splashing. Do not place objects filled with liquids, such as vases, on the apparatus. Avoid placing the unit near heat sources or in direct sunlight.
• Вентиляция: Агрегаттын айланасында жетиштүү желдетүүнү камсыз кылыңыз. Эч кандай желдетүүчү тешиктерди жаап албаңыз.
• Тазалоо: Disconnect the power cord before cleaning. Use a dry cloth only.
• Жайгашкан жери: Сабвуферди кулап кетпеши үчүн, аны туруктуу, тегиз жерге коюңуз.

Сүрөт 1: Rear panel of the AMC SUB 2 Active Subwoofer. This view displays all input/output connections, control knobs for Volume, Low Pass, and Phase, the Ground Lift switch, and the power input with the main power switch.

Башкаруу каражаттары жана байланыштар

The rear panel of the AMC SUB 2 provides all necessary controls and connection points for integration into your audio system. Refer to Image 1 for visual reference.

• Көлөмү: This knob adjusts the overall output level of the subwoofer. Range from -30dB to +6dB.
• ТӨМӨН ӨТҮҮ: This knob sets the upper frequency limit for the subwoofer, allowing you to blend it seamlessly with your main speakers. Adjustable from 50Hz to 130Hz.
• ФАЗА: This switch (0°/180°) allows you to adjust the phase of the subwoofer's output relative to your main speakers. This helps to optimize bass response and avoid cancellation.
• LINE IN (RCA): Stereo RCA inputs (Right/Left) for connecting to the line-level output of your audio source (e.g., receiver, pre-ampөмүр).
• LINE OUT (RCA): Stereo RCA outputs (Right/Left) for passing the audio signal to other components.
• IN (XLR/TRS): Balanced XLR and 6.3mm TRS (Tip-Ring-Sleeve) inputs for professional audio connections. Available for both Left and Right channels.
• OUT (XLR/TRS): Balanced XLR and 6.3mm TRS outputs for passing the audio signal to other professional audio equipment. Available for both Left and Right channels.
• ЖЕР КӨТӨРҮҮ: This switch helps to eliminate hum or buzz caused by ground loops in your audio system.
• POWER которуштуруу: Toggles the subwoofer's power ON or OFF.
• AC IN: Connector for the detachable power cord. Ensure the correct voltage (230V) берилет.

Жайгашуу

1. Жайгашкан жери: Position the subwoofer in your listening area. Experiment with different locations to find the best bass response. Corner placement often enhances bass, but can also lead to boominess.
2. Кубат туташуу: Ensure the POWER switch is in the OFF position. Connect the supplied power cord to the AC IN socket on the subwoofer's rear panel and then to a suitable wall outlet.
3. Аудио туташуусу:
   • RCA туташуу: Connect RCA cables from the LFE (Low-Frequency Effects) or Subwoofer output of your receiver/pre-amplifier to the LINE IN (Left or Right, or both for stereo) on the SUB 2. If your source has stereo line outputs, connect both Left and Right to the corresponding LINE IN on the SUB 2.
   • XLR/TRS Connection: For professional setups, connect balanced XLR or 6.3mm TRS cables from your audio mixer or processor's outputs to the IN (Left/Right) on the SUB 2.
4. Баштапкы жөндөөлөр:
   • Set the VOLUME knob to its minimum position (-30dB).
   • Set the LOW PASS knob to a starting point, typically around 80Hz.
   • Set the PHASE switch to 0°.

Иштеп жатат

1. Күйгүзүү: Turn on your main audio system components first, then switch the POWER button on the SUB 2 to the ON position.
2. Үндү тууралоо: Play some audio with significant bass content. Slowly increase the VOLUME knob on the SUB 2 until the bass output blends well with your main speakers. Avoid setting the volume too high, which can lead to distortion.
3. Low Pass Filter Adjustment: Adjust the LOW PASS knob to fine-tune the crossover frequency. The goal is to have a smooth transition between the subwoofer and your main speakers. If your main speakers are small, a higher crossover frequency (e.g., 100-120Hz) might be appropriate. For larger speakers, a lower frequency (e.g., 60-80Hz) may be better.
4. Фазаны тууралоо: Experiment with the PHASE switch (0° or 180°). Listen for the setting that provides the most impactful and coherent bass response at your listening position. This often involves trying both settings and choosing the one that sounds louder or more defined.
5. Жер көтөргүч: If you experience a persistent hum or buzz, try flipping the GROUND LIFT switch. This can help break ground loops that cause unwanted noise.
6. Өчүрүү: When finished, switch the POWER button on the SUB 2 to the OFF position, then turn off your main audio system components.

Техникалык тейлөө

• Тазалоо: Disconnect the power cord before cleaning. Use a soft, dry cloth to wipe the exterior surfaces of the subwoofer. Do not use liquid cleaners, aerosols, or abrasive materials, as these can damage the finish.
• Вентиляция: Periodically check that the ventilation openings are clear of dust and debris to ensure proper airflow and prevent overheating.
• Сактагыч: If storing the subwoofer for an extended period, ensure it is in a dry, cool environment, away from direct sunlight and extreme temperatures.

Проблемаларды чечүү

If you encounter issues with your AMC SUB 2, refer to the following common problems and solutions:

Техникалык шарттар

Кепилдик жана колдоо

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your authorized AMC dealer or distributor. Keep your proof of purchase for any warranty claims.