Hager EK570 Battery-Powered Thermostat User Manual

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of your Hager EK570 battery-powered weekly thermostat. Please read this guide thoroughly before use to ensure proper function, safety, and to maximize the benefits of its programmable features. Keep this manual for future reference.

2. Коопсуздук маалыматы

• Always disconnect power to the heating system before attempting any installation or maintenance.
• Installation should only be performed by a qualified electrician or competent person.
• Do not expose the thermostat to extreme temperatures, direct sunlight, high humidity, or water.
• Use only LR6 (AA) batteries as specified. Do not mix old and new batteries or different types of batteries.
• Аппаратты балдардан алыс кармаңыз.
• Do not attempt to open or repair the thermostat yourself. Refer to qualified service personnel.

3. Пакеттин мазмуну

Пакетиңизде бардык буюмдар бар экенин текшериңиз:

• Hager EK570 Thermostat Unit
• 2 x LR6 (AA) Batteries
• Mounting Screws and Wall Plugs (if applicable)
• Бул Колдонуучунун колдонмосу

4. Продукт бүтүп калдыview

Familiarize yourself with the components of your Hager EK570 thermostat:

Сүрөт 1: Алдыңкы view of the Hager EK570 thermostat. The device features a clear LCD display at the top, two square buttons below the display, and a central control cluster at the bottom with '-', 'OK', and '+' buttons.

• LCD дисплей: Shows current temperature, time, day, operating mode, and program status.
• Башкаруу баскычтары: Used for navigating menus, adjusting settings, and selecting modes. Typically includes 'Mode', 'Set', 'Up', 'Down', and 'OK' buttons.
• Батарея бөлүмү: Бирдиктин арткы жагында жайгашкан.

5. Орнотуу

5.1. Батареяны орнотуу

1. Remove the back cover of the thermostat.
2. Insert the 2 x LR6 (AA) batteries, ensuring correct polarity (+/-).
3. Replace the back cover. The display should now activate.

5.2. Термостатты орнотуу

The Hager EK570 is designed for surface mounting.

1. Choose a suitable location on an interior wall, away from direct sunlight, drafts, and heat sources (e.g., radiators, lamps). The recommended height is approximately 1.5 meters from the floor.
2. Carefully detach the front part of the thermostat from its base plate.
3. Mark the drilling points on the wall using the base plate as a template.
4. Тешиктерди бургула жана дубал тыгындарын салгыла.
5. Берилген бурамалар менен негизги плитаны дубалга бекитиңиз.
6. Connect the heating system wires to the terminals on the base plate according to the wiring diagram provided with your heating system. Ensure all connections are secure and correct.
7. Reattach the front part of the thermostat to the base plate, ensuring it clicks securely into place.

5.3. Initial Settings (Time and Date)

Upon first power-up or after battery replacement, you may need to set the current time and day.

1. Press the 'SET' or 'MODE' button to enter the settings menu.
2. Use the '+' or '-' buttons to navigate to 'Time' or 'Date' settings.
3. Press 'OK' to confirm and then use '+' or '-' to adjust the values (hour, minute, day, month, year).
4. Press 'OK' to save each setting and exit the menu.

6. Иштөө нускамалары

The Hager EK570 offers various operating modes and programming options to optimize your heating.

6.1. Иштөө режимдерин тандоо

The thermostat supports the following modes:

• Комфорт режими: Maintains a comfortable temperature (e.g., 21°C) during occupied periods.
• Кыскартылган режим: Maintains a lower, energy-saving temperature (e.g., 18°C) during unoccupied periods or at night.
• Суукка каршы режими: Maintains a minimum temperature (e.g., 5°C) to prevent pipes from freezing.
• Кол режими: Allows you to set a constant temperature that overrides any programmed schedule.
• Майрам режими: Maintains a specific temperature for an extended period (e.g., during vacation).

To switch between modes, press the 'MODE' button repeatedly until the desired mode is displayed.

6.2. Adjusting Temperature Setpoint

In any operating mode (except Frost Protection), you can temporarily adjust the temperature setpoint:

1. Use the '+' or '-' buttons to increase or decrease the desired temperature.
2. The new setpoint will be active until the next programmed event or until you manually change it again. This is known as a temporary override.

6.3. Апталык программалоо

The EK570 is a weekly programmable thermostat, allowing you to set up to 48 program steps per day across 4 setpoints (Comfort, Reduced, etc.). It comes with 3 pre-recorded programs and 1 free program for customization.

1. Press the 'PROG' or 'SET' button to enter programming mode.
2. Use '+' or '-' to select the day of the week you wish to program (e.g., Monday, Tuesday, etc.).
3. Press 'OK' to confirm the day.
4. The display will show the first program period. Use '+' or '-' to set the start time and then 'OK'.
5. Next, select the desired operating mode (Comfort, Reduced, etc.) for this period using '+' or '-' and confirm with 'OK'.
6. Repeat steps 4 and 5 for all desired program periods for that day.
7. You can copy programs from one day to another if needed (refer to specific instructions in the full manual for this feature).
8. Exit programming mode by pressing 'PROG' or 'MODE' button.

7. Техникалык тейлөө

7.1. Тазалоо

Clean the thermostat casing with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical agents, as these can damage the plastic and electronic components.

7.2. Батареяны алмаштыруу

The thermostat is powered by 2 x LR6 (AA) batteries. When the battery symbol appears on the display, or if the display becomes dim, it is time to replace the batteries.

1. Remove the back cover of the thermostat.
2. Эски батарейкаларды алып салыңыз.
3. Insert new 2 x LR6 (AA) batteries, observing correct polarity.
4. Арткы жапкычты ордуна коюңуз.

The thermostat has a power reserve of approximately 10 minutes, allowing for battery replacement without losing programmed settings, provided the replacement is done promptly.

8. Кыйынчылыктарды

9. Техникалык шарттар

10. Кепилдик жана колдоо

For detailed warranty information, technical support, or service inquiries, please refer to the official Hager webсайтына кириңиз же ыйгарым укуктуу сатуучуга кайрылыңыз. Сатып алуунун далили катары сатып алуу дүмүрчөгүңүздү сактап коюңуз.