Moen 179101 бурулуш түтүгүнүн түтүгү үчүн колдонмо

1. Продукт бүтүп калдыview

The Moen 179101 Diverter Tub Spout is a high-quality replacement or new installation component designed for bathtubs. Featuring a durable chrome finish and traditional style, this spout includes an integrated diverter mechanism to easily switch water flow between the tub spout and a showerhead. It is engineered for reliable performance and seamless integration into your bathroom's plumbing system.

Сүрөт 1.1: Алдыңкы view of the Moen 179101 Diverter Tub Spout in Chrome finish.

2. Коопсуздук маалыматы

Please read all instructions carefully before beginning installation. Failure to follow these instructions may result in property damage or personal injury.

• Always turn off the main water supply before attempting any plumbing work.
• Коргоочу көз айнектер жана кол каптар сыяктуу тиешелүү жеке коргоочу шаймандарды кийиңиз.
• Эгер кандайдыр бир кадамга ишенбесеңиз, квалификациялуу сантехникке кайрылыңыз.
• Суу менен камсыздоону калыбына келтирүүдөн мурун бардык туташуулардын коопсуз жана агып кетпегендигин текшериңиз.

3. Пакеттин мазмуну

Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:

• Moen 179101 Diverter Tub Spout (1 piece)
• Installation Hardware (may vary based on connection type)

3.1-сүрөт: Каптал view of the Moen 179101 Diverter Tub Spout, showing the diverter knob.

4. Техникалык шарттар

Figure 4.1: Dimensional drawing of the Moen 179101 Diverter Tub Spout.

5. Орнотуу боюнча колдонмо

This section provides general instructions for installing a diverter tub spout. Specific steps may vary based on your existing plumbing configuration (threaded or slip-on connection).

Керектүү куралдар:

• Жөнгө салынуучу ачкыч же түтүк ачкычы
• Screwdriver (Phillips or Flathead, depending on set screw type)
• Plumber's Tape (PTFE tape)
• Чүпүрөк же сүлгү

Даярдоо:

1. Үйүңүздүн негизги суусун өчүрүңүз.
2. Drain any remaining water from the pipes by opening a faucet.
3. Place a rag or towel in the tub to protect the finish and catch any small parts.

Removing the Old Tub Spout:

1. For Threaded Spouts: Unscrew the old spout counter-clockwise from the pipe extending from the wall. You may need a pipe wrench for stubborn spouts.
2. For Slip-On Spouts: Locate the set screw on the underside of the spout, near the wall. Loosen or remove this screw with a screwdriver. Pull the spout straight off the pipe.
3. Clean any old caulk or debris from the wall around the pipe.

Installing the New Moen 179101 Spout:

1. For Threaded Connections:
   • Apply plumber's tape clockwise around the threads of the pipe extending from the wall.
   • Thread the new Moen 179101 spout onto the pipe by turning it clockwise. Hand-tighten first, then use an adjustable wrench to tighten until snug and facing downwards. Do not overtighten.
2. For Slip-On Connections:
   • Slide the new Moen 179101 spout onto the pipe, ensuring it is fully seated against the wall.
   • Tighten the set screw on the underside of the spout until it is secure. Do not overtighten.
3. Apply a bead of silicone caulk around the base of the spout where it meets the wall to prevent water from seeping behind the wall.

Орнотуудан кийинки:

1. Негизги суу менен камсыздоону акырындык менен кайра күйгүзүңүз.
2. Check for any leaks around the spout connection. If leaks are present, tighten connections or reapply plumber's tape as needed.
3. Test the diverter function.

6. Операция

The Moen 179101 Diverter Tub Spout features a simple pull-up diverter knob to control water flow.

• To fill the tub: Ensure the diverter knob is in the down position. Water will flow directly from the tub spout.
• To use the shower: Pull the diverter knob upwards. This will redirect water flow from the tub spout to your showerhead.
• To return to tub flow: Push the diverter knob back down. The diverter may automatically disengage when water pressure is reduced or turned off.

7. Техникалык тейлөө жана кам көрүү

To maintain the beautiful chrome finish and ensure the longevity of your Moen tub spout, follow these care instructions:

• жумшак менен үзгүлтүксүз тазалоо, гamp кездеме.
• For stubborn spots, use a mild soap and water solution. Rinse thoroughly and dry with a soft cloth to prevent water spots.
• Жок use abrasive cleaners, harsh chemicals, ammonia-based cleaners, or scouring pads, as these can damage the finish.
• Avoid leaving cleaning products on the surface for extended periods.

8. Кыйынчылыктарды

If you encounter issues with your Moen 179101 Diverter Tub Spout, refer to the following common problems and solutions:

If these solutions do not resolve the issue, please contact Moen Customer Support.

9. Кепилдик маалыматы

Moen products are manufactured under the highest standards of quality and workmanship. The Moen 179101 Diverter Tub Spout is backed by Moen's Чектелген Өмүр бою Кепилдик баштапкы керектөөчү сатып алуучуга агып кетүүлөрдүн, тамчылоолордун жана бүтөө кемчиликтеринин алдын алуу.

For complete warranty details and terms, please refer to the official Moen warranty documentation or visit the Moen webсайт.

10. Кардарларды колдоо кызматы

For further assistance, technical support, or to inquire about replacement parts, please contact Moen Customer Service:

• Webсайт: Расмий Moen сайтына баш багыңыз webКөп берилүүчү суроолор, өнүмдөрдү каттоо жана байланыш маалыматы үчүн сайт. www.moen.com
• Телефон: Моенге кайрылыңыз webаймактык кардарларды тейлөө телефон номерлери үчүн сайт.

Колдоо кызматына кайрылганда, продуктуңуздун моделинин номери (179101) жана сатып алуу күнү болушу керек.