Selve SP 2/15 Tubular Motor for Roller Shutters - Instruction Manual

1. Киришүү

This manual provides essential instructions for the installation, operation, and maintenance of your Selve SP 2/15 tubular motor. The SP series motor is a versatile solution designed for various applications, including roller shutters, awnings, and internal screens. It features mechanical end-point adjustment directly on the motor head, offering a reliable and cost-effective automation solution.

Please read this manual thoroughly before installation and operation to ensure safe and correct use of the product.

2. Коопсуздук маалыматы

Маанилүү коопсуздук көрсөтмөлөрү:

• Орнотуу жана электр туташтыруулары жергиликтүү эрежелерге жана стандарттарга ылайык квалификациялуу адистер тарабынан аткарылышы керек.
• Орнотуу, техникалык тейлөө же оңдоо иштерин жүргүзүүдөн мурун электр кубатын өчүрүңүз.
• Ensure that the power supply matches the motor's specifications.
• Иштеп жатканда колдоруңузду, чачыңызды жана кенен кийимдериңизди кыймылдуу бөлүктөрдөн алыс кармаңыз.
• Балдардын мотор же анын башкаруу элементтери менен ойношуна жол бербеңиз.
• The motor is designed for specific applications (roller shutters, awnings, screens). Do not use it for purposes other than those specified.
• Критикалык эскертүү: Parallel connection of multiple SP drives is not permitted without a disconnection relay. If two or more SP drives are to be controlled simultaneously via a single switch or timer, a suitable disconnection relay must be used to prevent damage to the motors and control unit.

3. Орнотуу жана орнотуу

The Selve SP 2/15 motor is designed for straightforward installation within a tubular shaft (e.g., SW60). Proper installation is crucial for the motor's longevity and safe operation.

3.1 Таңгактан чыгаруу жана текшерүү

Carefully unpack the motor and inspect it for any signs of damage. Ensure all components are present before proceeding with installation.

3.2 Моторду монтаждоо

The motor is designed to be inserted into a suitable tubular shaft. Ensure the shaft is clean and free of obstructions. Secure the motor firmly within the shaft according to the specific requirements of your roller shutter or awning system.

Image 1: The Selve SP 2/15 tubular motor, showing its cylindrical form designed for integration into a roller shutter shaft.

Сүрөт 2: Каптал view of the Selve SP 2/15 motor, highlighting its uniform cylindrical body.

3.3 Электрдик туташуу

Connect the motor to the power supply and control switch according to the wiring diagram provided with your specific motor packaging. Ensure all connections are secure and properly insulated. Refer to the safety information regarding parallel connections.

Сүрөт 3: Детальдуу view of the motor's end cap, showing the connection points and adjustment screws for setting end limits.

3.4 Setting End Points

The Selve SP 2/15 features mechanical end-point adjustment. These "point-to-point" limits are set manually on the motor head using the designated adjustment screws. Follow the instructions provided with the motor for precise adjustment of the upper and lower limits of your roller shutter or awning. This motor does not require an upper stop.

• Adjust the upper limit to prevent the shutter/awning from overwinding.
• Adjust the lower limit to ensure the shutter/awning closes completely without excessive tension.

4. Иштөө нускамалары

Once installed and the end points are set, the Selve SP 2/15 motor operates via a connected switch or timer. The motor will move the roller shutter, awning, or screen between the set upper and lower limits.

• Use the UP button/setting to raise the shutter/awning.
• Use the DOWN button/setting to lower the shutter/awning.
• The motor will automatically stop at the pre-set mechanical end points.

5. Техникалык тейлөө

The Selve SP 2/15 motor is designed for long-term, reliable operation with minimal maintenance. However, periodic checks can help ensure optimal performance.

• Тазалоо: Мотордун айланасын таза жана чаң менен таштандылардан таза кармаңыз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
• Текшерүү: Periodically check the mounting points and electrical connections for tightness and wear.
• Майлоо: Мотор заводдо майланат жана адатта кошумча майлоону талап кылбайт.
• If you notice any unusual noises or performance issues, consult the troubleshooting section or contact customer support.

6. Кыйынчылыктарды

If you encounter issues with your Selve SP 2/15 motor, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Selve customer support or a qualified technician.

7. Техникалык шарттар

Key technical specifications for the Selve SP 2/15 Tubular Motor:

• Модел: SP 2/15
• Өндүрүүчү: ӨЗҮ
• Manufacturer Product ID: 352470
• Түрү: Түтүктүү мотор
• End Point Adjustment: Mechanical, "point-to-point"
• Шайкештик: Suitable for roller shutters, awnings, and various screens.
• Валдын шайкештиги: Designed for standard tubular shafts (e.g., SW60).
• ASIN: B00N1WTH3A

For detailed electrical specifications (voltage, power consumption, torque, lifting capacity), please refer to the product packaging or the official Selve technical data sheet.

8. Кепилдик жана колдоо

Selve products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Selve webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.

For technical assistance, spare parts, or further inquiries, please contact your authorized Selve dealer or Selve customer support. When contacting support, please have your model number (SP 2/15) and manufacturer product ID (352470) ready.

You can find more information and contact details on the official Selve webсайт: www.selve.de