Selve SEL-PLUS 2/7 Tubular Motor Instruction Manual

1. Продукт бүтүп калдыview

The Selve SEL-PLUS 2/7 is a high-quality tubular motor designed for roller shutters. It features electronic end position adjustment, making installation and configuration straightforward. This motor is compatible with SW60 roller shutter systems and provides a pulling force of 19 kg. Key functionalities include obstacle detection, overload protection, and the ability to connect multiple units in parallel.

1-сүрөт: Selve SEL-PLUS 2/7 tubular motor. This image displays the Selve SEL-PLUS 2/7 tubular motor, a grey cylindrical unit designed for roller shutters. It features black end caps for mounting and connection.

2. Негизги өзгөчөлүктөрү

• Тоскоолдуктарды аныктоо: Features obstacle detection in the downward direction with an automatic reverse function (rewinding from the obstacle).
• Оңой жөндөө: Simple unit adjustment via the four-wire connection cable, eliminating the need to open the roller shutter box.
• Ашыкча жүктөн коргоо: Integrated overload protection in both directions (e.g., shutdown in case of a frozen shutter).
• Параллель туташуу: Allows parallel connection of multiple Selve electronic drives without requiring additional switching elements.
• Automatic Direction Assignment: Provides automatic assignment of operating direction.

3. Орнотуу жана орнотуу

Маанилүү коопсуздук маалыматы: Installation should only be performed by qualified personnel. Disconnect power before beginning any installation work. Ensure all local electrical codes and regulations are followed.

1. Даярдоо: Ensure the roller shutter tube is correctly prepared and the mounting brackets are securely installed.
2. Motor Insertion: Carefully insert the tubular motor into the roller shutter tube. Ensure the drive adapter (crown) and bearing are properly seated.


2-сүрөт: Drive adapter (crown). This image shows a white plastic drive adapter, often referred to as a crown or wheel, which fits onto the motor shaft. It features hexagonal slots to engage with the roller shutter tube, transferring the motor's rotation.

3. Электр байланышы: Connect the four-wire cable to the motor's electrical port. Refer to the wiring diagram provided with the product for correct connections (Live, Neutral, Up, Down).

3-сүрөт: Electrical connection end cap. A detailed view of one end cap of the Selve tubular motor, showing the electrical connection port and mounting points. This is where the four-wire connection cable is attached.
4. Аяктоо абалын тууралоо: Once powered, use the control unit to set the upper and lower end positions. The electronic adjustment system simplifies this process via the connected cable. Follow the specific instructions in the detailed product manual for precise adjustment steps.
5. Сыноо: After adjustment, thoroughly test the motor's operation, including obstacle detection and overload protection, to ensure proper functionality.

4. Иштөө нускамалары

The Selve SEL-PLUS 2/7 motor operates roller shutters by receiving commands from a connected switch or control system. Once installed and end positions are set:

• Up Command: Activates the motor to raise the roller shutter to its programmed upper end position.
• Down Command: Activates the motor to lower the roller shutter to its programmed lower end position.
• Stop Command: Interrupts the motor's movement, stopping the roller shutter at its current position.
• Автоматтык функциялар: The motor's electronic system automatically manages end positions and reacts to obstacles or overloads as programmed during setup.

5. Техникалык тейлөө

The Selve SEL-PLUS 2/7 tubular motor is designed for long-term, maintenance-free operation. However, periodic checks can help ensure its longevity:

• Тазалоо: Keep the roller shutter and surrounding area clean from dust and debris that could impede movement. Do not clean the motor directly with liquids.
• Туташуу текшерүү: Periodically inspect the electrical connections for any signs of wear or loosening. Ensure the cable is not pinched or damaged.
• Колдонуучунун тейлөөчү тетиктери жок: The motor unit itself contains no user-serviceable parts. Do not attempt to open or repair the motor.
• Кесиптик текшерүү: If you notice any unusual noises, erratic operation, or significant changes in performance, contact a qualified technician for inspection.

6. Кыйынчылыктарды

If you encounter issues with your Selve SEL-PLUS 2/7 tubular motor, consider the following common troubleshooting steps:

• Мотор жооп бербейт:
  • Check the power supply to the motor. Ensure the circuit breaker is not tripped.
  • Verify all electrical connections are secure and correctly wired.
  • Test the control switch or system to ensure it is functioning correctly.
• Incorrect End Positions:
  • The end positions may need to be re-adjusted. Refer to the detailed adjustment procedure in the full product manual.
• Shutter Stops Unexpectedly:
  • This could indicate obstacle detection or overload protection activation. Check for any obstructions in the shutter's path or excessive resistance.
  • If the issue persists without visible cause, contact technical support.
• адаттан тыш үндөр:
  • Loud grinding or clicking noises may indicate a mechanical issue within the roller shutter system or the motor. Discontinue use and seek professional assistance.

For complex issues or if troubleshooting steps do not resolve the problem, contact Selve customer support or a certified technician.

7. Техникалык шарттар

8. Кепилдик жана колдоо

For warranty information, technical support, or service inquiries regarding your Selve SEL-PLUS 2/7 tubular motor, please contact the retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.