PROFLO PFXSC32C Multi Turn Straight Supply Stop with Strainer - Chrome

Introduction

This manual provides instructions for the installation, operation, and maintenance of the PROFLO PFXSC32C 5/8" x 3/8" Multi Turn Straight Supply Stop with Strainer. This product is designed to control water flow to plumbing fixtures, featuring a durable brass construction and a chrome finish for longevity and corrosion resistance. The integrated strainer helps prevent debris from entering the fixture.

Коопсуздук маалыматы

Please read all instructions carefully before installation. Failure to follow these instructions may result in property damage or personal injury.

• Кандайдыр бир сантехника иштерин баштоодон мурун ар дайым негизги суу менен камсыздоону өчүрүңүз.
• Коргоочу көз айнектер жана кол каптар сыяктуу тиешелүү жеке коргоочу шаймандарды кийиңиз.
• Агып кетүүнүн алдын алуу үчүн бардык туташуулардын бекем экенин текшериңиз. Ашыкча бекемдебеңиз.
• Эгер кандайдыр бир кадамга ишенбесеңиз, квалификациялуу сантехникке кайрылыңыз.
• This product is intended for use with potable water systems only.

Продукт бүттүview

Image: The PROFLO PFXSC32C Multi Turn Straight Supply Stop with Strainer, featuring a chrome finish and a multi-turn handle. This image displays the valve's overall design and connection points.

The PROFLO PFXSC32C is a straight supply stop valve designed for reliable water flow control. It features a 5/8" compression inlet and a 3/8" compression outlet. The multi-turn handle allows for precise control over water flow. An integrated strainer is included to filter out sediment and debris, protecting your plumbing fixtures.

Орнотуу жана орнотуу

Керектүү куралдар:

• Жөнгө салынуучу ачкыч же бasin ачкыч
• Pipe cutter (if cutting new supply lines)
• Teflon tape (optional, for threaded connections if applicable)
• Bucket and towels (for catching drips)

Орнотуу кадамдары:

1. Суу менен камсыздоону өчүрүү: Locate the main water shut-off valve for your home or the specific area where you are working and turn it off. Open a nearby faucet to relieve pressure and drain any remaining water from the lines.
2. Prepare the Inlet Pipe: Ensure the existing pipe (typically 5/8" OD) is clean, smooth, and free of burrs. If replacing an old valve, remove it and clean the pipe end.
3. Install Compression Nut and Ferrule: Slide the compression nut (included with the valve) onto the pipe, followed by the compression ferrule (ring). Ensure the ferrule is oriented correctly.
4. Attach the Supply Stop: Insert the pipe end with the nut and ferrule into the inlet of the PROFLO PFXSC32C supply stop. Hand-tighten the compression nut onto the valve body.
5. Байланышты бекемдөө: Using an adjustable wrench, carefully tighten the compression nut. Turn it about 1/2 to 3/4 of a turn past hand-tight. Do not overtighten, as this can damage the ferrule or valve.
6. Арматура менен камсыздоо линиясын туташтыруу: Attach the 3/8" supply line from your faucet or toilet to the outlet of the supply stop. Hand-tighten the nut, then use a wrench to tighten it an additional 1/4 to 1/2 turn.
7. Суу менен камсыздоону калыбына келтирүү жана агып кетүүлөрдү текшерүү: Slowly turn the main water supply back on. Check all connections for leaks. If a leak occurs, tighten the connection slightly until the leak stops.

Иштөө нускамалары

The PROFLO PFXSC32C is a multi-turn valve, meaning it requires several rotations of the handle to fully open or close the water flow.

• ачуу үчүн: Turn the handle counter-clockwise until it stops. This will allow full water flow to the connected fixture.
• Жабуу: Turn the handle clockwise until it stops. This will completely shut off the water flow to the connected fixture.
• Агымды жөндөө үчүн: Turn the handle partially to achieve a desired reduced water flow rate.

Техникалык тейлөө

Regular maintenance ensures optimal performance and extends the life of your supply stop.

• Тазалоо: Clean the exterior chrome finish with a soft cloth and mild soap. Avoid abrasive cleaners or harsh chemicals, as they can damage the finish.
• Сүзгүчтү тазалоо: If water flow to the fixture becomes restricted, the integrated strainer may be clogged. To clean, turn off the water supply at the supply stop, disconnect the fixture supply line, and carefully remove the strainer screen. Rinse it under running water to remove debris, then reassemble.
• агып текшерүүлөр: Periodically inspect the connections for any signs of leaks. Tighten connections slightly if necessary.
• Операция: Operate the valve fully open and fully closed a few times annually to prevent mineral buildup and ensure smooth operation.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик жана колдоо

The PROFLO PFXSC32C Multi Turn Straight Supply Stop is covered under PROFLO's 1 жылдык чектелген кепилдикБул кепилдик кадимки колдонуу жана тейлөө учурундагы материалдык жана жасалгалоодогу кемчиликтерди камтыйт.

For warranty claims, technical assistance, or further information, please contact PROFLO customer support through their official webсайтында же ыйгарым укуктуу дистрибьюторлордо сактаңыз. Кепилдикти жарактуулук мөөнөтү үчүн сатып алганыңызды тастыктаган документти сактап коюңуз.