Stayer SCE 1650 WMC Miter Saw User Manual

1. Киришүү

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Stayer SCE 1650 WMC Miter Saw. This versatile tool is designed for precise cutting of various materials including iron, aluminum, plastic, and wood. Please read this manual thoroughly before initial use and keep it for future reference.

2. Коопсуздук нускамалары

Өрт, электр тогуна урунуу жана жеке жаракат алуу коркунучун азайтуу үчүн ар дайым негизги коопсуздук чараларын сактаңыз. Бул көрсөтмөлөрдү аткарбоо олуттуу жаракат алууга алып келиши мүмкүн.

• Бардык нускамаларды окуңуз: Familiarize yourself with the tool's controls and proper use.
• Көздү коргоону кийүү: Ар дайым коргоочу көз айнек же каптал калканчтары бар коргоочу көз айнек тагыныңыз.
• Угуу коргоочу аппаратты кийүү: Use earplugs or earmuffs during operation.
• Коопсуз жумуш бөлүгү: Ар дайым clamp же кесүү учурунда кыймылга жол бербөө үчүн даярдалган тетикти башка жол менен бекитиңиз.
• Колду таза карма: Эч качан колуңузду кесүүчү бычактын жанына койбоңуз.
• Таза иш аянтын сактоо: Башаламан жерлер кырсыкка чакырат.
• Жарылуу коркунучу бар чөйрөдө иштебеңиз: Күйүүчү суюктуктар же газдар бар жерде электр шаймандарын колдонбоңуз.
• Тууралоодон мурун: Always disconnect the saw from the power source before making any adjustments, changing accessories, or performing maintenance.
• Use the Correct Blade: Ensure the blade is appropriate for the material being cut and is sharp and undamaged.
• Ашыкча чектен чыгуудан качыңыз: Ар дайым туура бутту жана тең салмактуулукту сактаңыз.

3. Продукт бүтүп калдыview

The Stayer SCE 1650 WMC is a robust miter saw featuring a durable aluminum base and upper table. It includes an electronic speed variator for optimized cutting across different materials.

1-сүрөт: Бүттүview of the Stayer SCE 1650 WMC Miter Saw. This image shows the complete miter saw unit, highlighting its red base, silver cutting table, and the main motor housing with the blade guard. The adjustable fence and clamping mechanisms are also visible.

Негизги компоненттер:

• Aluminum Base and Upper Table: Provides stability and durability.
• Electronic Variator: Allows adjustment of blade speed.
• Айлантуу механизми: Enables bevel cuts up to 45°.
• Swiveling Table: Features self-locking positions for miter cuts at 22.5°, 45°, and 90°.
• Чаң чыгаруу порту: For connecting a dust collection system.

4. Орнотуу

Before operating the miter saw, ensure it is properly set up and secured.

1. Пакеттен чыгаруу: Carefully remove all components from the packaging. Verify that all included items are present: SCE 1650 WMC miter saw, Widia TCT Z-52 blade, parallel guide, 2 horizontal clamps, and service wrench.
2. Монтаждоо: Securely mount the miter saw to a stable workbench using appropriate fasteners.
3. Blade орнотуу: Ensure the Widia TCT Z-52 blade (Ø 254 x 3 x 30 mm) is correctly installed and tightened according to the instructions provided with the blade. Always unplug the saw before installing or changing blades.
4. Parallel Guide and Clamps: Install the parallel guide and horizontal clamps as needed for your specific cutting task to secure the workpiece.
5. Чаң чыгаруу: Connect a suitable dust extraction system to the designated port to maintain a clean work environment.

5. Иштөө нускамалары

The Stayer SCE 1650 WMC is designed for precise cuts in various materials. Always ensure the workpiece is stable and secured before cutting.

5.1. Кубат жана ылдамдыкты көзөмөлдөө

• The saw operates at 1600W power.
• Use the electronic variator to adjust the no-load speed between 2500 and 4000 RPM (Giri/min) depending on the material being cut. Lower speeds are generally suitable for harder materials or larger cuts, while higher speeds are for softer materials or finer finishes.

5.2. Making Cuts

1. Straight Cuts (0°): Position the workpiece against the fence. Ensure the swiveling table is locked at 0°. Maximum cutting capacity: 50 x 100 mm.
2. Miter Cuts (Angled Horizontal Cuts): Adjust the swiveling table to the desired angle (e.g., 22.5°, 45°). The table has self-locking positions for common angles. Maximum cutting capacity at 45°: 32 x 100 mm.
3. Bevel Cuts (Angled Vertical Cuts): Tilt the saw head up to 45° to the left or right. Maximum cutting capacity at 45° inclined: 150 x 20 mm or 90 x 50 mm.
4. Compound Cuts (Miter and Bevel): Combine miter and bevel adjustments for complex angles. Maximum cutting capacity at 45° miter and 45° bevel: 75 x 20 mm.
5. General Cutting Capacity:
   • 90° (Straight): 155 x 25 mm / 65 x 77 mm
   • 45° Right/Left (Miter): 103 x 30 mm / 55 x 77 mm
   • 45° Inclined (Bevel): 150 x 20 mm / 90 x 50 mm
   • 45° Compound (Miter & Bevel): 75 x 20 mm
6. Операция: Lower the blade slowly into the workpiece, allowing the blade to reach full speed before contact. Apply steady, even pressure. Once the cut is complete, allow the blade to stop rotating before raising it from the workpiece.

6. Техникалык тейлөө

Regular maintenance ensures the longevity and safe operation of your Stayer SCE 1650 WMC Miter Saw. Always unplug the tool before performing any maintenance.

• Тазалоо: Regularly clean dust and debris from the saw, especially around the motor vents, blade guard, and cutting table. Use compressed air for hard-to-reach areas.
• Бычак текшерүү: Inspect the blade before each use for sharpness, cracks, or missing teeth. Replace dull or damaged blades immediately.
• Щетканы текшерүү: The motor uses brushes. Periodically inspect the carbon brushes for wear and replace them when they are worn down to their limit. Refer to a qualified service technician if unsure.
• Майлоо: Apply light machine oil to moving parts and pivot points as recommended in a more detailed service manual (if available) or as needed to ensure smooth operation.
• Бекер текшерүү: Мезгил-мезгили менен бардык гайкалардын, болттордун жана бурамалардын бекемдигин текшерип туруңуз. Ар кандай бошогон бекиткичтерди бекемдеңиз.

7. Кыйынчылыктарды

Бул бөлүмдө сиз кескич араа менен кездешүүчү кеңири таралган көйгөйлөр каралат.

8. Техникалык шарттар

Technical specifications for the Stayer SCE 1650 WMC Miter Saw:

• Модел: SCE1650WMC
• Күч: 1600 Вт
• Тtage: 230 вольт (AC)
• Жүк жок ылдамдыгы: 2500 – 4000 RPM (Giri/min)
• Бычактын диаметри: Ø 254 мм
• Бышактын тешиги: 30 мм
• Бышактын материалы: Tungsten Carbide (Widia TCT Z-52)
• Кубат булагы: Электр зымдары
• Салмагы: 16.5 кг
• Cutting Capacity (Max):
  • 90° (Straight): 155 x 25 mm / 65 x 77 mm
  • 45° Right/Left (Miter): 103 x 30 mm / 55 x 77 mm
  • 45° Inclined (Bevel): 150 x 20 mm / 90 x 50 mm
  • 45° Compound (Miter & Bevel): 75 x 20 mm

9. Кепилдик

STAYER products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official STAYER webдеталдуу кепилдик шарттары жана шарттары үчүн сайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.

10. Колдоо

For technical assistance, spare parts, or service inquiries, please contact your local STAYER dealer or authorized service center. You can also visit the official STAYER website for further support information and contact details.

Webсайт: www.stayer.es (Чыгampле, актуалдуу URL айырмаланышы мүмкүн)