Claber 24V 90938 Solenoid Valve Instruction Manual

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of your Claber 24V 90938 Solenoid Valve. This valve is designed for use in automatic garden irrigation systems, controlling water flow when connected to a compatible 24V AC irrigation programmer.

2. Коопсуздук маалыматы

• Always disconnect power to the irrigation programmer before performing any installation or maintenance on the solenoid valve.
• Бардык электр туташуулары квалификациялуу адис тарабынан жасалганын жана жергиликтүү электр эрежелерин сактаганын текшериңиз.
• Do not operate the valve with voltages other than 24V AC.
• Use appropriate thread sealant (e.g., PTFE tape) on all threaded connections to prevent leaks.
• Install the valve in a location protected from freezing temperatures.

3. Продукт бүтүп калдыview

The Claber 90938 is a robust 24V solenoid valve constructed from durable materials, designed for reliable water flow control in irrigation systems. It features a threaded connection for easy integration into existing piping.

Image 3.1: Claber 24V 90938 Solenoid Valve. This image shows the main body of the valve, made of black plastic, with threaded connections on both sides for water inlet and outlet. The solenoid coil, also black, is mounted vertically on top of the valve body, featuring two electrical terminals for connection to an irrigation programmer. The Claber logo is visible on the top cover.

4. Орнотуу жана орнотуу

4.1 Орнотууга чейинки текшерүүлөр

• Орнотууну баштоодон мурун, суу менен камсыздоо өчүрүлгөнүн текшериңиз.
• Verify that the irrigation programmer is compatible with 24V AC solenoid valves.
• Confirm that the pipe thread size matches the valve's 1/2" or 3/4" connections.

4.2 Механикалык орнотуу

1. Агымдын багытын аныктоо: The valve body typically has an arrow indicating the direction of water flow. Install the valve so that the arrow points in the direction of water flow from the main supply to the irrigation zone.
2. Жип герметикти колдонуу: Wrap PTFE tape (Teflon tape) clockwise around the male threads of the pipes connecting to the valve's inlet and outlet ports. Apply 3-5 wraps for a secure, watertight seal.
3. Түтүктөрдү туташтыруу: Hand-tighten the valve onto the pipes. Then, use a wrench to tighten an additional 1 to 2 turns. Do not overtighten, as this can damage the valve body or threads.
4. Коопсуз орнотуу: Ensure the valve is securely mounted and supported to prevent strain on the pipe connections.

4.3 Электрдик туташуу

1. Кубатты өчүрүү: Ensure the irrigation programmer is unplugged or its power supply is turned off.
2. Зым туташуу: Connect one wire from the 24V AC output of your irrigation programmer to one of the terminals on the solenoid coil. Connect the other wire from the programmer (common wire) to the other terminal on the solenoid coil. The polarity for 24V AC solenoids is generally not critical.
3. Коопсуз байланыштар: Use waterproof wire connectors (e.g., grease-filled wire nuts) to protect the electrical connections from moisture and corrosion.
4. Сыноо: Once all connections are secure and power is restored to the programmer, test the valve by manually activating the zone from the programmer.

5. Иштөө нускамалары

The Claber 90938 Solenoid Valve operates in conjunction with an automatic irrigation programmer. When the programmer sends a 24V AC signal to the valve, the solenoid coil energizes, opening the valve and allowing water to flow to the designated irrigation zone. When the signal is removed, the valve closes, stopping the water flow.

5.1 Автоматтык иштетүү

Set your irrigation programmer according to its specific instructions to schedule watering times and durations for the zone connected to this valve.

5.2 Manual Operation (if applicable)

Some solenoid valves include a manual override feature, often a small lever or screw on the solenoid coil. If present, turning or lifting this mechanism will manually open the valve, allowing water to flow independently of the programmer. Refer to the specific design of your valve for manual override options. Ensure to return it to the automatic position after manual use.

6. Техникалык тейлөө

• Үзгүлтүксүз текшерүү: Periodically inspect the valve for any signs of leaks, damage, or corrosion.
• Тазалоо: If the valve experiences reduced flow or fails to open/close properly, sediment or debris may be obstructing its internal components. Turn off the water supply and power, then carefully disassemble the top section of the valve to clean the diaphragm and internal passages. Reassemble carefully, ensuring all parts are correctly seated.
• Кыштоо: In regions subject to freezing temperatures, it is crucial to drain all water from the irrigation system, including the solenoid valves, before the first frost. This prevents damage from freezing water expansion. Consult your irrigation system's overall winterization guide.

7. Кыйынчылыктарды

8. Техникалык шарттар

• Модел: Клабер 90938
• Бренд: Клабер
• Тtage: 24V AC
• Туташуу түрү: жиптүү
• Порттардын саны: 1
• Жиптин өлчөмү: 1/2" or 3/4" (depending on installation)
• Материалдар: Stainless steel, Plastic, Copper
• Салмагы: Болжол менен 3 килограмм
• Клапандын түрү: Сугаттын башкаруу клапаны

9. Кепилдик жана колдоо

Claber products are manufactured to high-quality standards and are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Claber website. For technical support, spare parts, or further assistance, please contact Claber customer service or your local distributor.

Көбүрөөк маалымат жана байланыш маалыматтарын даректен таба аласыз Claber Store on Amazon.