APC Back-UPS BX1400UI User Manual

1. Киришүү

The APC Back-UPS BX1400UI is an Uninterruptible Power Supply (UPS) designed to protect your electronic equipment from power outages, surges, and spikes. Featuring Line Interactive Technology and Automatic Voltage Regulation (AVR), this unit provides reliable battery backup and surge protection for connected devices. It includes six IEC 320 C13 outlets, a USB interface for communication, and data line protection.

Сүрөт 1: Алдыңкы view of the APC Back-UPS BX1400UI.

2. Коопсуздук боюнча маанилүү маалымат

• Электр коркунучу: Бул бирдикте жогорку тtage components. Do not attempt to open the UPS casing, especially when connected to power. Refer all servicing to qualified personnel.
• Түз байланыш: Always connect the UPS directly to a wall outlet. Do not use surge protectors, extension cords, or power strips with the UPS input.
• Вентиляция: UPSтин айланасында жетиштүү желдетүүнү камсыз кылыңыз. Вентиляция тешиктерин жаап албаңыз.
• Баштапкы жыт: A new unit may emit a distinct odor, often described as similar to burnt plastic. This is normal and typically dissipates after a few weeks of continuous operation in a well-ventilated area. It is not indicative of a malfunction.
• Батареяны алмаштыруу: User-performed battery replacement during the warranty period will void the product warranty. Refer to the Maintenance section for details.

3. Пакеттин мазмуну

Пакетиңизде төмөнкү заттар бар экенин текшериңиз:

• APC Back-UPS BX1400UI Unit
• Two (2) IEC-C13 to IEC-C14 power cables (for connecting devices to the UPS)
• Колдонуучунун Колдонмосу (бул документ)

Эскертүү: The input power cable (for connecting the UPS to the wall outlet) and the USB communication cable are typically камтылган эмес and must be purchased separately if needed.

4. Орнотуу

4.1. Unpacking and Battery Connection

1. UPSти анын таңгагынан кылдаттык менен чыгарып алыңыз.
2. Locate the yellow battery connector on the rear panel of the UPS. This connector is typically disconnected for safe transport.
3. Push the yellow battery connector firmly into its socket until it clicks into place. This activates the UPS battery circuits.

4.2. Кубатка туташуу

1. Connect the UPS to a grounded 230V AC wall outlet using an appropriate IEC-320 C14 input power cable (not included).
2. Ensure the connection is direct to the wall outlet. Do not use surge protectors or extension cords.
3. Allow the UPS to charge for at least 10 hours before connecting critical equipment to ensure full battery runtime.

4.3. Жабдууларды туташтыруу

The BX1400UI features six IEC 320 C13 outlets for connecting your devices.

• Батареянын камдык көчүрмөсүн сактоо жана чыңалуудан коргоо розеткалары: All six IEC-C13 outlets provide both battery backup and surge protection. Connect your computer, monitor, and other critical electronics to these outlets.
• Маалымат линияларын коргоо: The rear panel includes RJ-11 ports labeled "DSL/Modem/Fax/Phone" for protecting your telephone or DSL line from surges. These ports are not suitable for Ethernet network connections.
• USB интерфейси: Connect a USB Type B cable (not included) from the UPS to your computer for communication and to enable shutdown software functionality.

Figure 2: Rear panel connections of the APC Back-UPS BX1400UI.

5. Иштөө нускамалары

5.1. Күйгүзүү / Өчүрүү

• Күйгүзүү үчүн: Press and hold the power button on the front panel until you hear a short beep. The UPS will perform a self-test, and the 'On Line' LED will illuminate green.
• Өчүрүү үчүн: Press and hold the power button until the UPS powers down.

5.2. LED көрсөткүчтөрү

The front panel features LED indicators to show the UPS status:

• Онлайн режиминде (жашыл LED): Indicates the UPS is operating on utility power and providing power to connected equipment.
• On Battery (Yellow LED): Indicates the UPS is operating on battery power during a power outage or brownout. A humming noise is normal during battery operation.
• Батареяны алмаштырыңыз (кызыл LED): Батареяны алмаштыруу керектигин көрсөтүп турат.
• Ашыкча жүктөлүш (Кызыл LED): Туташтырылган жабдуу UPSтин кубаттуулугунан ашып кеткенин көрсөтөт. Зарыл эмес жабдууну дароо ажыратыңыз.

5.3. Автоматтык томtage Регламент (AVR)

UPS автоматтык түрдө кичинекей volume'ду оңдойтtage fluctuations (sags and surges) without switching to battery power, thus preserving battery life. If voltage fluctuations exceed the AVR's correction range, the UPS will switch to battery power.

6. Негизги өзгөчөлүктөрү

• Line Interactive технологиясы: Provides stable power by regulating voltage without constantly switching to battery.
• Automatic Voltage Регламент (AVR): Кичинекей үндү оңдойтtagбатареянын кубатын колдонбостон термелүү.
• Батареянын камдык көчүрмөсү: Supplies power to connected equipment during outages.
• Тоскоолдуктан коргоо: Protects connected devices from damaging power surges and spikes.
• 6 IEC 320 C13 Outlets: Standard outlets for computer equipment.
• USB интерфейси: Enables communication with a computer for monitoring and controlled shutdown.
• Маалымат линияларын коргоо: Safeguards telephone/DSL lines from surges.

7. Программаны колдонуу

The APC Back-UPS BX1400UI supports USB Human Interface Device (HID) class specifications, allowing it to be recognized by most operating systems without special drivers.

7.1. APC PowerChute Personal Edition (Windows)

For advanced monitoring and management on Windows systems, download the APC PowerChute Personal Edition software from the official APC webсайт. Бул программа сизге мүмкүнчүлүк берет:

• Monitor UPS status, power consumption, and battery charge.
• Узартылган кубаттуулук учурунда компьютериңизди автоматтык түрдө өчүрүүнү конфигурациялаңызtages.
• Adjust UPS settings, such as alarm behavior (e.g., disable the beeper during battery operation).
• Perform self-tests to ensure proper UPS functionality.

7.2. Linux Support (apcupsd / NUT)

For Linux environments, the UPS can be managed using `apcupsd` or Network UPS Tools (NUT). These tools provide similar monitoring and shutdown capabilities. Refer to the documentation for `apcupsd` or NUT for configuration details, typically involving specifying `UPSCABLE usb` and `UPSTYPE usb` for `apcupsd`, or using the `usbhid-ups` driver for NUT.

8. Техникалык тейлөө

8.1. Батареяны алмаштыруу

The APC Back-UPS BX1400UI uses two 12V 7.2Ah sealed lead-acid batteries. The recommended replacement battery pack is APC RBC113.

• During Warranty: If the unit is still under its 2-year warranty, battery replacement must be performed by Schneider Electric IT (SEIT) customer service. User-performed battery replacement during the warranty period will automatically void the warranty.
• After Warranty: After the warranty period, batteries can be replaced by the user. However, due to the presence of high voltage components even when disconnected, it is highly recommended that this operation be performed by specialized personnel. If you choose to replace the batteries yourself, exercise extreme caution.
• Процедура бүттүview (for experienced users only): Disconnect the UPS from all power sources and connected equipment. Disconnect the yellow battery connector. Remove the rear panel screws, then the front panel (which is snap-fitted), and additional screws. Carefully access the battery compartment. Note the orientation and wiring of the existing batteries (taking photos is recommended) to ensure correct installation of the new batteries.

8.2. Автоматтык өчүргүчтү баштапкы абалга келтирүү

In case of an overload, the UPS may trip its circuit breaker. To reset, disconnect some equipment from the UPS, then press the circuit breaker button located on the rear panel (refer to Figure 2).

9. Кыйынчылыктарды

For more detailed troubleshooting, refer to the complete user manual available on the APC webсайт.

10. Техникалык шарттар

Figure 3: Typical runtime graph for APC Back-UPS 1400VA.

11. Кепилдик жана колдоо

11.1. Продукцияга кепилдик

The APC Back-UPS BX1400UI comes with a 2 жылдык чектелген кепилдик сатып алынган күндөн тартып. Бул кепилдик нормалдуу колдонуудагы материалдардагы жана жасалгадагы кемчиликтерди камтыйт. Кепилдик дооматтары үчүн сатып алганыңыздын далилин сактап коюңуз.

Маанилүү: Unauthorized opening of the unit or user-performed battery replacement during the warranty period will void the warranty.

11.2. Техникалык колдоо

For technical assistance, troubleshooting, or warranty service, please contact APC by Schneider Electric customer support. Visit the official APC website for contact information specific to your region, including phone numbers and online support resources.

Online resources often include FAQs, knowledge bases, and downloadable manuals that can provide further assistance.