SONGMICS OBG22B Office Chair User Manual

Introduction

Welcome to your new SONGMICS OBG22B Office Chair. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure safe and optimal use of your chair. Please read through this guide carefully before using the product.

Image: The SONGMICS OBG22B office chair, featuring a black padded seat and backrest, with silver armrests and a five-star base with casters.

Коопсуздук маалыматы

ЭСКЕРТҮҮ: This chair has a rocking function. Exercise caution to prevent tipping over, especially when leaning back fully.

• Ensure all screws and bolts are tightened securely before initial use and periodically thereafter.
• Отургучта турбаңыз. Аны отуруу үчүн гана колдонуңуз.
• Do not use the chair if any parts are damaged, missing, or appear to be malfunctioning. Contact customer support for replacement parts.
• Keep children and pets away from the chair during assembly to prevent injury.
• The maximum static load capacity for this chair is 120 kg (264 lbs). Do not exceed this weight limit.

Пакеттин мазмуну

Please verify that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, please contact customer service.

• 1 x Офис отургучу (бөлүнүп алынган компоненттер)
• 1 x Accessory Kit (includes screws, bolts, Allen wrench, etc.)
• 1 x Instruction Manual

Орнотуу жана чогултуу

Follow these steps carefully for proper assembly. It is recommended to assemble the chair on a soft, clean surface (e.g., a carpet or a blanket) to prevent scratches to the floor or chair components.

1. Жылдыздардын базасына роликтерди тиркөө: Insert each caster into the holes at the end of each leg of the star base until it clicks into place. Ensure all five casters are securely attached.
   

   Сүрөт: Дөңгөлөктөрдү беш жылдыздуу негизге кантип киргизүү керектигин көрсөткөн диаграмма.

2. Газ лифтин киргизүү: Place the gas lift cylinder into the central hole of the assembled star base. Do not push it down forcefully.
   

   Image: Diagram illustrating the placement of the gas lift cylinder into the center of the chair's base.
3. Колтук таянычтарын отургучка бекитүү: Align the armrests with the pre-drilled holes on the underside of the seat cushion. Secure them using the appropriate screws from the accessory kit. Do not fully tighten yet.
   

   Image: Diagram showing how to attach the armrests to the seat cushion using screws.

4. Арка таянычты отургучка жана колтук таянычтарга бекитүү: Position the backrest between the armrests and align its holes with the corresponding holes on the armrests and seat. Secure with screws. Now, fully tighten all screws for the armrests and backrest.
   

   Image: Diagram illustrating the attachment of the backrest to the seat and armrests.

5. Mount Mechanism Plate: Attach the mechanism plate to the underside of the seat cushion, ensuring the front of the mechanism faces the front of the seat. Secure with screws.
   

   Image: Diagram showing how to attach the control mechanism to the bottom of the seat.
6. Чогултулган отургучту газ лифтине коюңуз: Carefully place the assembled seat (with armrests, backrest, and mechanism attached) onto the gas lift cylinder. The chair is now ready for use.
   

   Image: Diagram showing the final step of placing the assembled chair top onto the gas lift and base.

Иштөө нускамалары

Бийиктигин тууралоо

To adjust the seat height, pull the lever located under the right side of the seat upwards. To raise the seat, lift the lever while taking your weight off the seat. To lower the seat, lift the lever while remaining seated. The height can be adjusted from 44 cm to 54 cm.

Tilt/Rocking Function

The chair features a convenient rocking function. To enable rocking, pull the lever outwards. To lock the chair in an upright position, push the lever inwards. The tilt tension can be adjusted by rotating the round knob located under the front of the seat. Turn clockwise to increase tension (harder to rock) and counter-clockwise to decrease tension (easier to rock).

Сүрөт: деталдуу view of the chair's tilt mechanism and the knob for adjusting rocking tension.

Айлануу функциясы

The chair can swivel 360 degrees, allowing for easy movement and access to different areas of your workspace without needing to reposition the entire chair.

Image: Illustration showing the chair's 10 cm height adjustment range and its ability to swivel 360 degrees.

Техникалык тейлөө

• Тазалоо: жумшак менен отургучту сүртүп, гamp cloth. For stubborn stains, use a mild soap solution and dry thoroughly with a clean cloth. Avoid harsh chemicals, abrasive cleaners, or solvents, as these can damage the material.
• Үзгүлтүксүз текшерүүлөр: Periodically (e.g., every 3-6 months) check all screws and bolts to ensure they are tight. Re-tighten if necessary to maintain stability and safety.
• Кастерге кам көрүү: Keep the caster wheels clean from dust, hair, and debris to ensure smooth rolling and prevent damage to your flooring.

Проблемаларды чечүү

Техникалык шарттар

Image: Detailed diagram showing the various dimensions of the SONGMICS OBG22B office chair.

Image: Icon indicating the chair's maximum static load capacity of 120 kg.

Кепилдик жана колдоо

For warranty information or technical support, please contact SONGMICS customer service through their official website or the retailer where the product was purchased. Please have your model number (OBG22B) and purchase receipt ready when contacting support.

Онлайн ресурстар: Расмий SONGMICS сайтына кириңиз webКөп берилүүчү суроолор, кошумча продукт маалыматы жана колдоо ресурстары үчүн сайт.

Visit the SONGMICS Official Store