Introduction
This manual provides detailed instructions for the safe and proper installation and operation of your Mount-It! MI-604 Universal Projector Mount. Please read all instructions carefully before installation to ensure correct setup and to prevent damage to the product or property.
Продукт өзгөчөлүктөрү
- 3-In-1 Universal Design: Supports Flush Ceiling Installation, Telescoping Arm Ceiling Installation, and Wall Installation.
- Жалпы шайкештик: Mounting holes on projectors must be between 8.85" and 12.40" to fit.
- Full-Motion Adjustments: Offers +/- 15 degrees pitch, +/- 8 degrees roll, and 360 degrees swivel for optimal viewбурчтар.
- Adjustable Height/Extension: Height adjustment for ceiling installation ranges from 5 inches to 25.6 inches. Extension from the wall for wall-mounted installation ranges from 16.9 inches to 25.6 inches.
- Кабель башкаруу системасы: Integrated system helps conceal and organize cables for a clean setup.
- Мыкты курулуш: Made from solid steel material with a durable powder-coated finish (black).
- Жогорку жүк кубаттуулугу: Safely holds projectors up to 44 lbs.
Орнотуу жана орнотуу
The MI-604 mount offers versatile installation options. Choose the method that best suits your needs.
1. Mounting Options Overview
2. Height and Extension Adjustments
3. Universal Projector Compatibility
4. Кабелдик башкаруу
5. Load Capacity and Wall Plate Dimensions
Орнотуу видеосу
Иштөө жана тууралоо
Once installed, the MI-604 mount allows for precise adjustments to achieve the perfect projection angle.
Full Motion Movement
The mount also supports 360 degrees swivel, enabling you to direct the projector output in any desired direction.
Техникалык тейлөө
To ensure the longevity and safe operation of your projector mount, perform the following maintenance checks periodically:
- Regularly inspect all screws and bolts to ensure they are securely tightened.
- Check for any signs of wear or damage to the mount components. Replace any damaged parts immediately.
- Keep the mount clean by wiping it with a soft, dry cloth. Avoid using abrasive cleaners.
Проблемаларды чечүү
If you encounter issues with your projector mount, consider the following:
- Mount is not stable: Ensure all mounting hardware is correctly installed and tightened into a sturdy surface (wall stud or ceiling joist).
- Projector is not level: Use the pitch and roll adjustments to fine-tune the projector's angle. Ensure the adjustment screws are tightened after positioning.
- Cables are visible: Utilize the integrated cable management system to route and conceal cables within the mount's arm.
- Projector mounting holes do not align: Verify that your projector's mounting hole pattern falls within the supported range of 8.85" to 12.40". Adjust the mount's arms as needed.
Техникалык шарттар
| Модель номери | MI-604 |
| Продукциянын өлчөмдөрү | 12.6 x 9.9 x 2.5 дюйм |
| Элемент Салмагы | 3.55 фунт |
| Бренд | Маунт-Ит! |
| Түс | Кара |
| Шайкеш түзмөктөр | Проекторлор |
| Монтаж түрү | Шыпка орнотуу, дубалга орнотуу |
| Жүктөө жөндөмдүүлүгү | 44 фунт |
| Чайырды тууралоо | +/- 15 градус |
| Roll тууралоо | +/- 8 градус |
| Бурулуш тууралоо | 360 градус |
| Ceiling Height Adjustment | 5 дюймдан 25.6 дюймга чейин |
| Wall Extension | 16.9 дюймдан 25.6 дюймга чейин |
Кепилдик жана колдоо
Specific warranty information is not provided in the product details. For warranty claims or technical support, please contact Mount-It! customer service directly or visit their official webсайт.