UDIRC U818A-HD RC Quadcopter Instruction Manual

1. Продукт бүтүп калдыview

The UDIRC U818A-HD is a 2.4GHz 4-channel, 6-axis headless RC quadcopter equipped with an HD camera. It is designed for both beginners and experienced pilots, offering stable flight and easy control. Key features include headless mode for simplified orientation, 6-axis gyro for stability, and 360-degree eversion capabilities.

Image: The UDIRC U818A-HD quadcopter and its remote control unit.

2. Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• UDI U818A-HD RC Quadcopter
• Алыстан башкаруу
• LiPO Battery (2 included)
• 4 ГБ Micro SD эс тутум картасы
• USB заряддагыч
• Запастык пропеллер
• Screwdriver
• Instruction Manual

3. Орнотуу

3.1 Батареяны орнотуу

1. Open the battery compartment on the quadcopter's underside.
2. Connect the LiPO battery to the quadcopter's power connector.
3. Carefully place the battery inside the compartment and close the cover.

3.2 Пропеллерди орнотуу

Ensure propellers are correctly oriented. Propellers marked 'A' should be installed on motor shafts 'A', and 'B' on 'B'. Secure them with the provided screws.

3.3 Камераны орнотуу

Attach the HD camera to the designated slot on the quadcopter's underside. Connect the camera cable to the port. Insert the 4GB Micro SD card into the camera's slot.

Сүрөт: асты view of the quadcopter, highlighting the camera and LED lights.

3.4 Алыстан башкарууну жөндөө

Insert 4 AA batteries (not included) into the remote control. Power on the remote control.

3.5 Binding and Calibration

1. Place the quadcopter on a flat, level surface.
2. Turn on the quadcopter, then turn on the remote control.
3. Move the left joystick (throttle) all the way up, then all the way down. The quadcopter's lights will stop flashing, indicating successful binding.
4. To calibrate the gyroscope, move both joysticks to the bottom-right corner simultaneously until the lights flash and then become solid.

Image: The UDIRC U818A-HD quadcopter and its remote control, ready for operation.

4. Иштөө нускамалары

4.1 Учууну башкаруунун негизги каражаттары

• Дроссель (Сол джойстикти өйдө/ылдый): Бийиктикти көзөмөлдөйт.
• Яв (Сол джойстикти солго/оңго бураңыз): Rotates the quadcopter horizontally.
• Алдыга/артка (Оң жактагы джойстикти өйдө/ылдый): Алдыга жана артка кыймылды башкарат.
• Left/Right Sideward Flight (Right Joystick Left/Right): Controls sideward movement.

4.2 Headless Mode (IOC)

The Headless/IOC function allows the quadcopter to fly based on the pilot's orientation, regardless of the drone's actual front direction. This simplifies control for beginners. Activate and deactivate using the dedicated button on the remote control.

4.3 360° Eversion

Press the 360° Eversion button on the remote control, then move the right joystick in any direction to perform a continuous roll. Ensure sufficient altitude before attempting this maneuver.

Image: Diagram showing the quadcopter performing a 360-degree eversion.

4.4 Сүрөткө жана видеого тартуу

Use the dedicated buttons on the remote control to capture photos or start/stop video recording. Ensure the Micro SD card is inserted correctly in the camera. Recorded media can be accessed by removing the SD card and inserting it into a computer.

5. Техникалык тейлөө

• Батареяга кам көрүү: Charge batteries using the provided USB charger. Do not overcharge. Store batteries in a cool, dry place.
• Тазалоо: Use a soft, dry cloth to clean the quadcopter. Avoid water or harsh chemicals.
• Пропеллерди алмаштыруу: If propellers are damaged, replace them with spare parts. Ensure correct 'A' and 'B' propeller placement.

6. Кыйынчылыктарды

• Quadcopter not responding: Ensure the battery is charged, the remote control has fresh batteries, and the quadcopter is properly bound and calibrated.
• Туруксуз учуу: Recalibrate the gyroscope on a flat surface. Check for damaged propellers and replace if necessary.
• Камера жаздырбай жатат: Verify the Micro SD card is inserted correctly and has sufficient free space. Ensure the camera cable is securely connected.

7. Техникалык шарттар

8. Кепилдик жана колдоо

Кепилдик жөнүндө маалымат жана техникалык колдоо алуу үчүн, өндүрүүчүнүн расмий өкүлүнө кайрылыңыз webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.