Holzmann DSM 100200B Bench Grinder Instruction Manual

1. Киришүү

Thank you for choosing the Holzmann DSM 100200B Bench Grinder. This machine is designed for versatile grinding tasks, featuring both a belt grinding station and a disc grinding station. To ensure safe and efficient operation, please read this instruction manual thoroughly before initial use and keep it for future reference.

This manual provides essential information on assembly, operation, maintenance, and troubleshooting. Adhering to these instructions will help prevent accidents, prolong the life of your machine, and ensure optimal performance.

2. Коопсуздук нускамалары

Always observe general safety regulations when working with power tools. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Жумуш аймагынын коопсуздугу: Жумушчу жерди таза жана жакшы жарыктандырыңыз. Башаламан же караңгы жерлер кырсыкка чакырат. Жарылуучу чөйрөдө, мисалы, күйүүчү суюктуктар, газдар же чаң бар жерде электр шаймандарын иштетпеңиз.
• Электр коопсуздугу: Электр шайманынын сайгычтары розеткага дал келиши керек. Эч качан сайгычты эч кандай жол менен өзгөртпөңүз. Түтүктөр, радиаторлор, диапазондор жана муздаткычтар сыяктуу жерге туташтырылган же жерге туташтырылган беттерге денеге тийбеңиз.
• Жеке коопсуздук: Always wear eye protection (safety glasses or goggles) and hearing protection. Use a dust mask if grinding operations create dust. Do not overreach. Keep proper footing and balance at all times.
• Куралды колдонуу жана кам көрүү: Электр аспапты күчтөп албаңыз. Колдонмоңуз үчүн туура электр шайманын колдонуңуз. Кандайдыр бир тууралоолорду жасоодон, аксессуарларды алмаштыруудан же электр шаймандарын сактоодон мурда вилканы кубат булагынан ажыратыңыз.
• Тейлөө: Электр шаймандарын сактаңыз. Электр шаймандын иштешине таасир этиши мүмкүн болгон кыймылсыз тетиктерди, тетиктерди сындырууну жана башка шарттарды текшериңиз.

This machine operates on 400V. Ensure proper electrical installation and grounding by a qualified electrician.

3. Продукт бүтүп калдыview

The Holzmann DSM 100200B is a robust bench grinder featuring two primary grinding stations:

• Belt Grinding Station: Equipped with a 915 x 100 mm grinding belt, typically 80 grit, operating at 15 m/sec. The belt arm can be tilted from 0° to 90°, with a fixed tilt support at 45° for various grinding angles. Belt changes are lever-controlled for ease of use.
• Disc Grinding Station: Features a grinding wheel with dimensions of 200 x 32 x 32 mm, rotating at a maximum speed of 2950 rpm.

Figure 1: Holzmann DSM 100200B Bench Grinder with belt and disc grinding stations. The machine features a belt grinding station on the left and a disc grinding station on the right, mounted on a sturdy base.

4. Орнотуу

1. Пакеттен чыгаруу: Carefully remove the machine from its packaging. Inspect for any shipping damage. Report any damage immediately to your supplier.
2. Монтаждоо: Securely mount the bench grinder to a stable workbench using appropriate bolts and washers. Ensure the mounting surface can support the machine's weight (approximately 34 kg) and withstand operational vibrations.
3. Электр байланышы: Connect the machine to a 400V power supply. Ensure the electrical circuit is properly fused and grounded. If unsure, consult a qualified electrician.
4. Install Grinding Belt (if not pre-installed):
   • Loosen the tension lever for the belt grinding arm.
   • Slide the new 915 x 100 mm grinding belt onto the rollers, ensuring the directional arrow on the belt matches the machine's rotation.
   • Re-engage the tension lever to secure the belt.
5. Install Grinding Disc (if not pre-installed):
   • Машинанын розеткадан ажыратылганын текшериңиз.
   • Mount the 200 x 32 x 32 mm grinding wheel onto the spindle, securing it with the provided flange and nut. Do not overtighten.
6. Adjust Work Rests: Adjust the work rests for both the belt and disc grinding stations to a safe and appropriate distance from the grinding surface (typically 1-2 mm).

5. Иштөө нускамалары

1. Ишке чейинки текшерүү: Before each use, inspect the grinding belt and disc for wear, damage, or cracks. Ensure all guards and work rests are securely in place.
2. Күйгүзүү: Connect the machine to the power supply and switch it on. Allow the machine to reach full operating speed before beginning any grinding task.
3. Using the Belt Grinder:
   • Adjust the tilt of the belt arm (0° to 90°) as needed for your workpiece. The 45° tilt support can be used for common angles.
   • Hold the workpiece firmly against the work rest and gently bring it into contact with the moving grinding belt. Apply even, moderate pressure.
   • Move the workpiece across the belt to ensure even material removal and prevent overheating of the workpiece or belt.
4. Using the Disc Grinder:
   • Hold the workpiece firmly against the work rest.
   • Bring the workpiece into contact with the rotating grinding disc, typically on the side where the disc is moving downwards towards the work rest. This helps prevent the workpiece from being thrown upwards.
   • Apply light, consistent pressure and move the workpiece to avoid concentrating heat in one spot.
5. Өчүрүү: After completing your task, switch off the machine and wait for all moving parts to come to a complete stop before leaving the work area or performing any adjustments.

6. Техникалык тейлөө

Regular maintenance ensures the longevity and safe operation of your Holzmann DSM 100200B.

• Тазалоо: Regularly clean the machine, especially around the motor and grinding areas, to remove dust and debris. Use compressed air or a brush. Ensure the machine is unplugged before cleaning.
• Grinding Belt Replacement:
  • Машинаны розеткадан ажыратыңыз.
  • Release the tension lever for the belt arm.
  • Remove the old belt and install a new 915 x 100 mm belt, ensuring correct direction.
  • Re-tension the belt.
• Grinding Disc Replacement:
  • Машинаны розеткадан ажыратыңыз.
  • Carefully remove the retaining nut and flange.
  • Replace the worn disc with a new 200 x 32 x 32 mm grinding wheel.
  • Reassemble the flange and nut, tightening securely but not excessively.
• Текшерүү: Periodically check all fasteners for tightness. Inspect the power cord for damage. Lubricate moving parts as recommended by the manufacturer (refer to specific product documentation if available).

7. Кыйынчылыктарды

If you encounter problems not listed here or if solutions do not resolve the issue, please contact Holzmann customer support.

8. Техникалык шарттар

9. Кепилдик жана колдоо

Holzmann products are manufactured to high-quality standards and are subject to strict quality controls. This product comes with a standard manufacturer's warranty against defects in materials and workmanship.

For warranty claims, technical support, or to order spare parts, please contact your authorized Holzmann dealer or visit the official Holzmann website for contact information. Please have your model number (DSM 100200B) and purchase date available when contacting support.

Көбүрөөк маалымат алуу үчүн төмөнкү дарекке кириңиз: www.holzmann-maschinen.at