Sanitas SFT 01 Medical Thermometer User Manual

Introduction

The Sanitas SFT 01 Medical Thermometer is designed for accurate measurement of body temperature. This device features a large 3-digit display, is 100% waterproof, and can be disinfected for hygienic use. It is glass-free and mercury-free, ensuring safety. An audible signal indicates the completion of a measurement, and the device automatically stores the last reading. It also includes an automatic shut-off function and a battery change indicator.

Жайгашуу

1. Батареяны орнотуу

The Sanitas SFT 01 thermometer comes with a product-specific battery already installed. If the battery indicator appears on the display, the battery needs to be replaced. To replace the battery:

1. Батарея отсегинин капкагын кылдаттык менен алып салыңыз.
2. Insert a new battery of the specified type, ensuring correct polarity.
3. Батарея бөлүкчөсүнүн капкагын бекем орнотуңуз.

2. Баштапкы күйгүзүү

Press the power button to turn on the thermometer. A brief self-test will occur, and the last measured temperature will be displayed. The device is ready for use when 'Lo' appears on the display, indicating it is ready to measure a new temperature.

Image: The Sanitas SFT 01 Medical Thermometer, showing its overall design with the display and power button.

Иштөө нускамалары

1. Ченөө алуу

Ensure the thermometer is clean before use. Press the power button to turn it on. Place the thermometer tip in the desired measurement location (oral, axillary, or rectal). Hold it steady until the audible signal sounds, indicating the measurement is complete.

Image: Close-up of the thermometer's flexible tip, designed for comfortable and safe use.

2. Дисплейди окуу

The measured temperature will be shown on the large 3-digit LCD display. The device automatically saves the last measurement for reference.

Image: A close-up of the thermometer's digital display, clearly showing a temperature reading of 37.0 degrees Celsius.

3. Автоматтык өчүрүү

To conserve battery life, the thermometer will automatically turn off after approximately 10 minutes of inactivity.

Тейлөө жана тазалоо

The Sanitas SFT 01 thermometer is 100% waterproof and disinfectable, making it easy to clean and maintain hygiene.

Тазалоо көрсөтмөлөрү:

1. After each use, clean the thermometer tip with a soft cloth and a disinfectant solution (e.g., 70% isopropyl alcohol).
2. Жарнама менен аппаратты толугу менен тазалаңызamp cloth. Do not immerse the entire device in water for extended periods, although it is waterproof.
3. Store the thermometer in its protective storage case in a cool, dry place, away from direct sunlight and extreme temperatures.

Проблемаларды чечүү

• Дисплей жок / Түзмөк күйбөйт: Check if the battery is correctly installed. If the battery change indicator was shown, replace the battery.
• 'Lo' or 'Hi' Displayed Continuously: 'Lo' indicates a temperature below the measurable range, and 'Hi' indicates a temperature above the measurable range. Ensure proper placement of the thermometer for measurement.
• Туура эмес окуулар: Ensure the thermometer tip is in full contact with the measurement area. Avoid taking measurements immediately after eating, drinking, or exercising. Allow sufficient time for the measurement to complete (until the audible signal).
• Батареяны алмаштыруу көрсөткүчү: If the battery symbol appears on the display, replace the battery as described in the Setup section.

Техникалык мүнөздөмөлөр

Кепилдик маалымат

Please refer to the warranty card included with your product for specific warranty terms and conditions. General warranty information may also be available on the official Sanitas webсайт.

Кардарларды колдоо

For further assistance, technical support, or inquiries regarding your Sanitas SFT 01 Medical Thermometer, please visit the official Sanitas website or contact their customer service department. Contact details can typically be found in the packaging or on the manufacturer's webсайт.