Introduction
This manual provides detailed instructions for the proper use and maintenance of your Fujitsu General Air Conditioner Remote Control, model AR-RCC2J. Please read this manual thoroughly before using the remote control to ensure optimal performance and longevity.
Жайгашуу
Батарея орнотуу
The remote control requires two AAA (UM-4) alkaline batteries. Ensure correct polarity when inserting the batteries.
- Slide the battery cover on the back of the remote control downwards to open.
- Insert two new AAA alkaline batteries, matching the (+) and (-) terminals as indicated inside the battery compartment.
- Батареянын капкагын чыкылдаган үн чыкканга чейин кайра ордуна жылдырып, жабыңыз.
Маанилүү: Do not mix old and new batteries, or different types of batteries. Remove batteries if the remote control will not be used for an extended period to prevent leakage.

1-сүрөт: Батарея отсеги менен пульттун арткы бөлүгү.
Иштөө нускамалары
Familiarize yourself with the buttons on your remote control. The following section describes the function of each button.

Сүрөт 2: Алдыңкы view алыстан башкаруу пультунун.
| Баскычтын аты | Функция |
|---|---|
| 運転/停止 (Операция/Токтоо) | Кондиционерди КҮЙГҮЗӨТ же ӨЧҮРөт. |
| 運転切換 (Иштөө режими) | Cycles through operation modes: Auto, Cooling, Dehumidify, Fan, Heating. |
| 温度 (Temperature) ▲/▼ | Керектүү температура жөндөөсүн тууралайт. |
| 風量切換 (Fan Speed) | Adjusts the fan speed: Auto, Strong, Weak, Gentle, Silent. |
| 風向 (Air Direction) | Аба агымынын горизонталдуу багытын тууралайт. |
| スイング (Swing) | Activates or deactivates the automatic vertical airflow swing. |
| ハイパワー (High Power) | Тез муздатуу же жылытуу үчүн күчтүү иштөө режимин иштетет. |
| 電流カット (Current Cut) | Engages an energy-saving mode by limiting current consumption. |
| 信号切換 (Signal Switch) | Used for switching signals, potentially for controlling multiple units or specific functions. |
| プラズマイオン (Plasma Ion) | Activates the Plasma Ion function for air purification. |
| 内部クリーン (Ички таза) | Initiates an internal cleaning cycle for the air conditioner unit. |
| タイマー (Таймер) | Sets or cancels the ON/OFF timer. |
| 切換 (Switch) | Used for navigating or confirming timer settings. |
| 時間変更 (Time Change) | Adjusts the time for timer settings. |
| リセット (Reset) | Resets the remote control settings. Typically a recessed button requiring a pointed object. |
Техникалык тейлөө
Алыстан башкарууну тазалоо
Пультту жумшак, кургак чүпүрөк менен сүртүңүз. Суюк тазалагычтарды же абразивдик материалдарды колдонбоңуз, анткени алар бетке же ички тетиктерге зыян келтириши мүмкүн.
Батареяны алмаштыруу
Replace batteries when the display becomes dim or the remote control becomes unresponsive. Refer to the 'Battery Installation' section for detailed instructions.
Проблемаларды чечүү
- Алыстан башкаруу жооп бербейт:
Check if the batteries are inserted correctly with the correct polarity. Replace with new batteries if they are old or depleted. Ensure there are no obstructions between the remote control and the air conditioner unit's receiver. - Дисплей күңүрт же бош:
This indicates low battery power. Replace both batteries with new AAA alkaline batteries. After replacing batteries, press the 'Reset' button (if available and accessible) to restore full functionality. - Air Conditioner Not Responding to Commands:
Ensure the remote control is pointed directly at the air conditioner unit. Verify that the air conditioner unit is powered on. If the issue persists, try resetting the remote control by removing and reinserting the batteries, then pressing the 'Reset' button.
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | AR-RCC2J |
| Түс | Ак |
| Power Source | 2 x AAA щелочтуу батарейкалар (киргизилген эмес) |
| Өлчөмдөрү (болжол менен) | 16.8 x 9 x 3.3 см |
| Салмагы (болжол менен) | 98 г |
| UPC | 601209819167 |
Кепилдик жана колдоо
For warranty information or technical support, please refer to the documentation provided with your Fujitsu General air conditioner unit or contact Fujitsu General customer service directly. This remote control is designed as a genuine replacement part.





