iJDMTOY Front Bumper Switchback LED Daytime Running Lights Instruction Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your iJDMTOY Front Bumper Switchback LED Daytime Running Lights. These lights are designed as a direct replacement for the OEM bumper reflectors on 2006-2009 Nissan 350Z LCI models, offering both xenon white Daytime Running Light (DRL) and amber yellow LED turn signal functions.

Коопсуздук чаралары

• Always disconnect the vehicle's battery before beginning any electrical work to prevent electrical shock or damage.
• Коргоочу көз айнектер жана кол каптар сыяктуу тиешелүү жеке коргоочу шаймандарды кийиңиз.
• Унаа тегиз жерде токтоп турганына, токтоочу тормозду иштетиңиз.
• Эгер кандайдыр бир кадамга ишенбесеңиз, квалификациялуу автотехникке кайрылыңыз.

Пакеттин мазмуну

Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:

• 2x iJDMTOY Switchback LED DRL/Turn Signal Assemblies (Left & Right)
• Wiring Harness with Control Module

Image: Complete iJDMTOY Switchback LED DRL kit showing the two light assemblies and the associated wiring harness.

Орнотуу боюнча колдонмо

This installation is compatible with 2006-2009 Nissan 350Z LCI models only. It replaces OEM part numbers 26140-CF40A and 26145-CF40A.

1-кадам: Унаа даярдоо

• Park your Nissan 350Z on a flat, stable surface.
• Тормозду иштетиңиз.
• Унаанын аккумуляторунун терс терминалын ажыратыңыз.
• Access the front bumper area. This may require removing the front bumper or specific bumper panels/bezels to gain access to the OEM reflector locations.

Step 2: Remove OEM Bumper Reflectors

• Carefully unclip or unscrew the existing OEM vertical grille filler inserts/reflectors from the front bumper.
• Set aside the OEM parts.

Step 3: Install iJDMTOY LED Assemblies

• Align the new iJDMTOY Switchback LED DRL assemblies with the openings in the bumper.
• Snap or secure the LED assemblies into place. Ensure they are seated firmly and flush with the bumper surface.

Сүрөт: жакын план view of one iJDMTOY LED light unit, highlighting its design and clear lens.

4-кадам: Зымдарды туташтыруу

Route the wiring from the LED assemblies to the engine bay or a suitable location for connections. The wiring harness typically includes connections for DRL (white light) and turn signal (amber light) functions.

• For Daytime Running Light (White) Function: Connect the designated DRL wire from the control module to a 12V ignition switched power source. This can often be found in the fuse box (e.g., a fuse that is only active when the ignition is on).
• For Turn Signal (Amber) Function: Connect the designated turn signal wires from the control module to the positive wires of your vehicle's existing front turn signals. This allows the amber LEDs to flash in sync with your factory turn signals.
• Жерге туташуу: Connect the ground wire from the control module to a reliable chassis ground point on the vehicle.
• Secure all wiring with zip ties to prevent chafing or interference with moving parts. Ensure all connections are secure and insulated.

Step 5: Testing and Reassembly

• Унаанын аккумуляторун кайра туташтырыңыз.
• Turn on the ignition and verify that the white DRLs illuminate.
• Activate the turn signals (left and right) to confirm that the amber LEDs flash correctly.
• If all functions operate as expected, reassemble any removed bumper panels or components.

Операция

The iJDMTOY Switchback LED DRLs operate automatically based on your vehicle's electrical system connections:

• Daytime Running Light (DRL) Mode: When the vehicle's ignition is on, the LEDs will illuminate in a bright xenon white color, enhancing visibility during daylight hours.
• Turn Signal Mode: When the turn signal is activated, the white DRLs will switch off, and the LEDs will flash in an amber yellow color, indicating your turning intention. Once the turn signal is deactivated, the white DRLs will resume.

Image: The iJDMTOY LED lights displaying both their white DRL and amber turn signal functions.

Image: A Nissan 350Z with the iJDMTOY LED DRLs active, showing the bright white illumination.

Image: A Nissan 350Z with the iJDMTOY LED turn signals active, showing the amber illumination.

Техникалык тейлөө

These LED lights are designed for long-lasting performance with minimal maintenance.

• Тазалоо: Clean the lens surfaces periodically with a soft cloth and mild automotive cleaner to ensure maximum light output. Avoid abrasive cleaners.
• Текшерүү: Periodically check wiring connections for any signs of wear, corrosion, or looseness.
• Зыян: If the lens or housing becomes damaged, replacement of the entire assembly may be necessary.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик маалымат

iJDMTOY products typically come with a limited warranty covering manufacturing defects. For specific warranty terms, duration, and claim procedures, please refer to the warranty card included with your product or visit the official iJDMTOY webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.

Кардарларды колдоо

For technical assistance, installation questions, or product inquiries, please contact iJDMTOY customer support. You can find contact information and additional resources on the official iJDMTOY webсайты же алардын Amazon дүкөн бети аркылуу.

Visit the iJDMTOY Store: iJDMTOY Amazon Store