FOMITO 11-inch Articulating Magic Arm and Super Clamp User Manual

1. Киришүү

This manual provides comprehensive instructions for the safe and effective use of your FOMITO 11-inch Articulating Magic Arm and Super Clamp. This versatile accessory combination is designed to securely mount various photographic and videographic equipment, including LCD monitors, LED video lights, and cameras, to a wide range of surfaces and rigs.

Please read this manual thoroughly before initial use to ensure proper setup and operation.

2. Продукт бүтүп калдыview

2.1 Пакеттин мазмуну

• 1 x FOMITO 11-inch Articulating Magic Arm
• 1 x FOMITO Super Clamp

Image: The package includes one 11-inch articulating arm, one super clamp, and a small adapter.

2.2 Негизги өзгөчөлүктөрү

• 11-inch Articulating Magic Arm: Features a single locking knob for simultaneous release or enlargement of tension across all three articulating joints, allowing for flexible positioning.
• Супер Клamp: Designed for secure attachment to various surfaces, poles, or rods. Equipped with non-slip pads for enhanced grip and protection.
• Жалпы шайкештик: Both components feature 1/4"-20 and 3/8"-16 screw threads for broad compatibility with cameras, monitors, lights, and other accessories.
• Туруктуу курулуш: Constructed from aluminum alloy for strength and longevity.

Image: The FOMITO 11-inch Articulating Magic Arm and Super Clamp shown separately.

Image: Illustration highlighting the upgraded metal knob design for improved durability compared to older plastic versions.

3. Орнотуу нускамалары

3.1 Attaching the Super Clamp

1. Identify a stable surface, rod, or pole for attachment.
2. Unscrew the T-handle on the Super Clamp жаактарын ачуу үчүн.
3. Клamp around the desired object, ensuring the non-slip pads make full contact.
4. Tighten the T-handle until the clamp is securely fastened. Do not overtighten.

Image: The Super Clamp jaw can open up to 1.8 inches (45mm) and features 1/4" and 3/8" screw mounts.

3.2 Attaching the Magic Arm

1. Locate the 1/4"-20 or 3/8"-16 screw mount on the Super Clamp.
2. Screw one end of the Articulating Magic Arm onto the chosen mount until it is finger-tight.
3. Ensure the arm is firmly attached to prevent rotation or loosening during use.

3.3 Mounting Equipment to the Magic Arm

1. Identify the appropriate screw mount (1/4"-20 or 3/8"-16) on your equipment (e.g., monitor, LED light, camera).
2. Screw the equipment onto the free end of the Articulating Magic Arm.
3. Кооптуу бекемдөө.
4. Маанилүү: The maximum recommended payload for this arm is 1.5 kg (approximately 3.3 lbs). Exceeding this limit may result in instability or damage.

Image: A monitor mounted on the Magic Arm, which is attached to a camera cage. The image indicates a maximum payload of 1.5 kg.

4. Иштөө нускамалары

4.1 Adjusting the Articulating Magic Arm

1. To adjust the position of the arm, loosen the central locking knob. This will release tension on all three joints simultaneously.
2. Carefully reposition the arm and the attached equipment to the desired angle and height. The arm allows for 360-degree rotation at its ball joints.
3. Once the desired position is achieved, tighten the central locking knob firmly to secure the arm in place. Ensure it is tight enough to prevent sagging, especially with heavier loads within the specified limit.

Image: The Magic Arm's joints allow for full 360-degree rotation, providing extensive positioning flexibility.

Image: Detail of the central locking knob, which controls the tension of all articulating joints.

4.2 Adjusting the Super Clamp

Супер Клamp's jaw opening is adjusted by rotating the T-handle. Turn clockwise to tighten and counter-clockwise to loosen. Ensure the clamp is always securely fastened to prevent equipment from falling.

Сүрөт: Мисamples of the Magic Arm and Super Clamp in use, demonstrating versatility for mounting on various objects and camera setups.

5. Техникалык тейлөө

• Тазалоо: Wipe the arm and clamp жумшак, кургак чүпүрөк менен сүртүңүз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонуудан алыс болуңуз.
• Текшерүү: Regularly inspect all screws, joints, and the locking knob for any signs of wear or damage. Ensure all connections are tight before each use.
• Сактагыч: Store the product in a dry, clean environment away from extreme temperatures.

6. Кыйынчылыктарды

6.1 Arm Sagging or Not Holding Position

• Check Payload: Ensure the total weight of the mounted equipment does not exceed the maximum payload of 1.5 kg.
• Tighten Knob: Fully tighten the central locking knob. If it feels loose or stripped, the internal mechanism may be worn.
• Тартуу борбору: For optimal stability, try to position the equipment so its center of gravity is as close to the central joint as possible, minimizing leverage.

6.2 Super Clamp Not Securing Properly

• Беттик шайкештиги: Ensure the surface or object being clamped is within the jaw's adjustable range (11mm to 45mm) and provides sufficient friction for the non-slip pads.
• Tighten T-handle: Т-формасындагы тутка толугу менен бекем тартылганын текшериңиз.
• Продукцияларды текшерүү: Check the non-slip pads for wear or damage that might reduce grip.

7. Техникалык шарттар

Image: Diagram showing the dimensions of the Magic Arm (7.4 inches / 18.8 cm) and Super Clamp (3.5 inches / 9 cm).

8. Кепилдик жана колдоо

For warranty information or technical support, please refer to the official FOMITO webсайтка же сатуучуга кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.