Instruction Manual

Introduction

Thank you for choosing the Hardware Resources CAN-TMSC-12 Top Mount Single Waste Bin Pull-Out Unit. This unit is designed to provide a convenient and discreet waste management solution for your kitchen cabinet. Featuring full extension ball bearing slides and soft-close functionality, it ensures smooth and quiet operation. This manual provides essential information for proper installation, operation, and maintenance to ensure long-lasting performance.

Коопсуздук маалыматы

• Always ensure the unit is securely mounted to prevent tipping or instability.
• 100 LBS максималдуу салмагы кубаттуулугу ашпагыла.
• Иштеп жаткан учурда колду кыймылдуу бөлүктөрдөн алыс кармаңыз.
• Use appropriate personal protective equipment (PPE) such as gloves and eye protection during installation.
• Ensure all fasteners are tightened properly to prevent loosening over time.

Пакеттин мазмуну

Сураныч, орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:

• 1 x CAN-TMSC-12 Pull-Out Unit (pre-assembled with slides)
• Adjustable Rear Brackets
• Door Brackets
• Монтаждоочу жабдыктар (бурамалар)
• Top Mount Plastic Ring (for 35 or 50 Qt trash can)

Орнотуу жана орнотуу

This unit comes with no assembly required for the main pull-out mechanism. Installation primarily involves mounting the unit into your cabinet and attaching the door brackets.

Керектүү куралдар:

• Өлчөө лентасы
• Карандаш
• Бургулоо
• Бурагыч (Филипс башы сунушталат)
• Деңгээл

Орнотуу кадамдары:

1. Министрлер кабинетин даярдоо: Ensure your cabinet opening is at least 12 inches wide and has a depth of 21.625 inches to accommodate the unit. The unit is designed for base cabinets.
2. Бирдикти жайгаштырыңыз: Place the pre-assembled pull-out unit inside the cabinet. Ensure it is centered and positioned correctly for your desired trash can access.
3. Secure to Cabinet Bottom: Using the provided mounting hardware, secure the base of the pull-out unit to the bottom of your cabinet. Ensure the unit is level before tightening all screws.
4. Attach Rear Brackets (if needed): The unit includes adjustable rear brackets. If your cabinet structure requires additional support or specific positioning, attach and adjust these brackets as necessary.
5. Install Door Brackets: Extend the pull-out unit fully. Attach the door brackets to the front of the pull-out unit. Carefully align your cabinet door with these brackets and secure the door to the brackets using appropriate screws. Adjust the brackets to ensure a perfect fit and smooth operation of the cabinet door.
6. Insert Trash Can: Place your 35 Qt or 50 Qt trash can into the designated area within the unit, ensuring it fits securely within the top mount plastic ring.

Image: The Hardware Resources CAN-TMSC-12 pull-out unit, showcasing its wooden base, full extension slides, and a single waste bin with a small storage caddy. This view highlights the overall structure and components.

Image: The Hardware Resources CAN-TMSC-12 pull-out unit shown installed within a cabinet. The cabinet door is attached to the unit, demonstrating how it integrates seamlessly into kitchen cabinetry when extended.

Иштөө нускамалары

Operating your Hardware Resources pull-out waste bin unit is straightforward:

• ачуу үчүн: Gently pull the cabinet door or the handle attached to the door. The full extension slides will allow the unit to glide smoothly out of the cabinet.
• Жабуу: Push the cabinet door or the unit back into the cabinet. The soft-close mechanism will engage as the unit approaches the closed position, ensuring a quiet and gentle return.
• Replacing Trash Can: Simply lift the trash can out of the top mount plastic ring when full. Insert a new trash can, ensuring it is properly seated within the ring.

Техникалык тейлөө

Regular maintenance will help prolong the life and performance of your pull-out unit:

• Тазалоо: Wipe down the wooden base and metal slides with a damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish or components.
• Slide Lubrication: Periodically, you may apply a silicone-based lubricant to the ball bearing slides to maintain smooth operation. Do not use oil-based lubricants as they can attract dust and debris.
• бекиткичтерди текшерүү: Every few months, check all mounting screws and fasteners to ensure they are tight. Re-tighten if necessary.
• эскирүү үчүн текшерүү: Regularly inspect the slides and brackets for any signs of wear or damage.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик жана колдоо

The Hardware Resources CAN-TMSC-12 unit comes complete with a limited lifetime warranty. For warranty claims, technical support, or replacement parts, please contact Hardware Resources customer service directly. Please have your model number (CAN-TMSC-12) and proof of purchase available when contacting support.

Өндүрүүчү: Аппараттык